Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Kitchen Remodeling: The Arlington Owner’s Guide
Kitchen remodeling in Arlington with Belgard-grade hard-surface materials typically runs $14,000 – $45,000 installed, and yes, we can often start repairs and smaller scoped work on the same day. Most Arlington homeowners don’t start by saying “my kitchen part failed.” They start with a look of their countertop edge, a grout line that’s given up along the backsplash, or a paver-style island façade that’s loosening at the base. That’s usually the moment they open a search bar and end up here.
What we install is a Belgard-compatible kitchen finish package: engineered porcelain and paver veneers on islands, backsplashes, and floor runs, matched to the rest of the room. When something in that system fails, we’re the crew that shows up to sort it out, price it in writing, and back it with the 90-Day Done Right Promise.
Quick facts to bookmark:
- Installed kitchen range in Arlington: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Typical failure discovered: 6 – 12 years after installation
- Warranty: written 90-Day Done Right Promise on every job
- Estimate: free, with line-item pricing
Which Belgard Models This Applies To
Belgard makes a deep line of hardscape products, and in kitchen remodels the ones we install most are modular pavers, porcelain tile veneers, and dimensioned wall blocks used on island faces and specialty backsplashes. If you’re not sure which line you have, look underneath the island overhang or inside a cabinet well. Belgard typically stamps the product line and color code on the pallet banding during install, and sometimes on the back of individual units. If the label is gone, measure the unit: modular pavers run a consistent 60mm face, 70mm, or 80mm thickness depending on the series, and that measurement alone narrows the family fast.
The OEM-vs-aftermarket decision for Belgard is not the same as for a garage door spring or an appliance. Belgard is a brand of pavers, wall blocks, and porcelain tile, not a brand of mechanical parts. There’s no “Belgard replacement motor” or “Belgard cartridge.” What you’re replacing is a failing paver, tile, block, or mortar-surface element, and the compatible replacement is whatever matches the series, color code, and thickness. Aftermarket equivalents in this category are often identical in quality, but a size or shade mismatch is what turns a $40 fix into a $400 blending problem.
For kitchens, the brand we install alongside Belgard is KraftMaid for cabinetry and Cambria or Silestone for countertops. If your remodel touches those, we carry those lines too, and you can look them up the same way you’d look up Belgard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Kitchen Remodeling Is Failing
The symptoms we hear about in Arlington kitchens tend to fall into five patterns, and each one points to the same underlying cause in the installation or in Texas heat cycling:
- Efflorescence on a backsplash or island face. That white, chalky film is salt migrating out of the mortar bed. It means water is getting behind the surface, not that the paver itself is bad. Left alone, it re-crystallizes under the finish and pushes the joint apart.
- Hairline cracks wider than 1/16 inch. In Arlington, summer ground movement and slab curl combine to flex the substrate. A crack that holds a fingernail is telling you the base has shifted, not the face tile.
- Hollow sound when you tap the surface with a screwdriver handle. A dull thud is a normal bed. A hollow ring means the mortar has debonded, often in the first 18 inches from a heat source like an oven or dishwasher.
- Grout lines that crumble or recede. This is the single most common call we get. Grout on a Belgard surface in a kitchen fails first because it’s softer than the tile and takes every scrape and every spill.
- Paver or block edges that loosen and rock. When a modular unit rocks underfoot, the sand or mortar joint under it has washed out. That’s usually a drainage issue, not a bad paver, and it’s what most homeowners discover first.
Replacement Cost & What’s Included
Honest installed pricing for the Arlington market, with what each line includes:
| Scope | Installed range | What’s in it |
|---|---|---|
| Full kitchen remodel (Belgard-compatible finishes) | $14,000 – $45,000 | Demolition, substrate prep, new surface materials, tile and grout, island work, trim |
| Small kitchen remodel | $9,000 – $20,000 | Galley or efficiency layout, surface swap, cabinetry face work, trim |
| Cabinet installation | $4,000 – $13,000 | KraftMaid or comparable, install, leveling, hardware |
| Countertop installation | $2,000 – $6,500 | Cambria, Silestone, or similar, templating, cutouts |
| Backsplash installation | $800 – $2,500 | Porcelain or Belgard-compatible veneer, grout, seal |
| Kitchen island installation | $3,000 – $10,000 | Belgard paver face, framing, countertop, electrical allowance |
What drives the number: layout complexity, whether the substrate is level and sound, and whether a plumbing or electrical relocation is involved. If your base is hollow or cracked, that’s a separate line item, and we quote it before demolition begins. Every allowance is written. Every price change is a written change order issued before a single nail moves. And every job closes with the 90-Day Done Right Promise on the contract.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check for a hollow sound, photograph a crack, and confirm whether the grout line is soft or crumbling. That’s diagnostic. What’s genuinely dangerous to DIY on this scope isn’t the surface work; it’s the electrical and plumbing inside an island or behind a backsplash. Cutting into an island wall to free a loose paver with an outlet box or a gas line right behind it is how people get hurt, and it’s why we recommend a licensed crew for anything that involves opening the wall cavity or the island base.
Grout regrouting on a backsplash is a task a careful homeowner can manage if the tile below is sound. Anything past that, call us. Our crew members have up to 28 years of experience, and we’ve seen what a $200 DIY shortcut costs when it turns into a $2,400 substrate repair.
One honest note: we’re an independent service provider, not affiliated with Belgard. What we do is install and repair Belgard-compatible surfaces with written scope and a named crew.
FAQs
How long should Belgard kitchen surfaces last in Arlington?
Expect 15 – 25 years on a properly installed porcelain or paver surface, less (10 – 15) if it’s outdoors or in a moisture-heavy zone. The killer in Arlington is not the material, it’s the heat cycling on an unshaded south-facing wall and any slab movement underneath. Call (888) 590-9867 for an exact quote, estimates are free.
Can a failing Belgard surface be repaired instead of replaced?
Yes, in many cases. Regrouting and re-setting one loose paver or block is often $200 – $800 installed, versus a full surface swap in the thousands. But if the mortar bed is hollow across more than a third of the surface, spot repair just delays the same failure. Call (888) 590-9867 for an exact quote, estimates are free.
How long does a Belgard kitchen surface swap take?
A single wall or island face, two to three days. A full backsplash, three to four days with cure time. A whole kitchen remodel with cabinetry and countertop is typically two to four weeks in Arlington depending on layout. Call (888) 590-9867 for an exact quote, estimates are free.
How do you source the replacement part?
We match the color code and thickness to the original series, and we order the compatible unit through the same supply chain we use for KraftMaid, Cambria, and Silestone. Nothing comes off a truck; we order against your job, in writing, with the SKU on the quote. If the original color is discontinued, we’ll show you side-by-side alternatives before you commit. Call (888) 590-9867 for an exact quote, estimates are free.
Get a Free Estimate in Arlington
If a Belgard surface in your kitchen is failing, or you’re planning a remodel and want the scope, allowances, and price in writing before anyone touches a hammer, call Barrett & Sons Construction Arlington at (888) 590-9867. A live person answers, day or night. We’ll come out, look at what you’ve got, and hand you a written, line-item estimate with no trip charge inside the county. Standing offers: $40 off any repair over $200, free second opinion on any written estimate, and a permanent 10% Senior & Veteran discount. Ask anyone on your street, or look up the license yourself. We’re an owner-operated local crew, and we’ll be here Monday.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.