Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Arlington Homeowners
Arlington sits on that heavy black clay that runs through North Texas, and that matters more for fencing than most homeowners realize. When the soil swells after a wet spring and shrinks in August, a post set too shallow or in the wrong concrete mix starts leaning within a couple of seasons. We build fences here to handle that ground, not to look good just long enough to cash the check. Our crew members have up to 28 years of experience, and every installed fence is backed by our 90-Day Done Right Promise in writing. If something’s off, one call brings us back to make it right. Call (888) 590-9867 for a free estimate on your fence in Arlington.

What Our Fence Installation Service Includes
Every fence job starts with a written scope: the material, the post spacing, the gate hardware, the height, and the price. Nothing gets added later without a change order signed before the work happens. Here’s what each type of fence involves and when it’s the right call.
Wood Fence
A wood fence is the most common privacy fence in Arlington neighborhoods like Dalworthington Gardens and the older streets off Park Row. Cedar and treated pine handle the local heat well when the posts are set deep and the boards get room to move. We set posts below the clay’s active layer, brace gates against sag, and space pickets so the fence dries evenly instead of cupping. If you’ve got a dog, tell us and we’ll match the picket gap to keep it contained.
Chain Link Fence
Chain link is the workhorse choice for backyards along the Arlington and Kennedale line where a fence needs to do a job without costing a fortune. It holds up to wind and weather with almost no maintenance, and it’s the right pick for pet containment and property lines that need a clear boundary. We set galvanized posts in concrete and tension the mesh so it doesn’t sag between seasons. You’ll hear the difference in a fence that stays tight versus one that rattles.
Vinyl Fence
Vinyl is popular in the newer developments around southwest Arlington because it never needs paint or stain and comes out of a Texas summer looking the same. The catch is the sun: cheap vinyl chalks and yellows, and posts flex in heat that tops 100 degrees. We install quality vinyl panels with reinforced posts and a proper depth on the footings so the fence doesn’t lean under its own weight. A typical vinyl run runs $3,500 to $9,000 depending on length and style.
Aluminum Fence
Aluminum is the go-to for pool enclosures and front-yard decorative fencing, and Arlington code has specific requirements for pool barriers that we check before we build. Powder-coated aluminum resists rust and holds its color through the summer sun. We anchor it to meet the required height and self-closing gate rules so it passes inspection the first time. If you’re fencing around a pool, get the code side right before you pick a style.
Iron Fence
Wrought iron and steel fencing belong on homes that want a traditional look and real security, especially along corner lots and busy streets. Iron needs a proper powder coat and galvanized treatment or it will rust at the welds within a few years in our humidity. We install it with solid footings and welded or bolted panels suited to the span. It costs more up front, but a good iron fence outlasts several wood ones.
Fence Repair
A leaning post, a sagging gate, or a section that took a hit during a storm doesn’t always mean a whole new fence. We repair posts, replace pickets and panels, reset gates, and re-tension chain link, and we tell you straight when a repair is the wrong money. Sometimes a fifteen-foot stretch is worth fixing and the rest of the fence has years left. We’ll show you exactly what we found before you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with premium materials you can look up yourself rather than mystery brands off a van. On the gate and hardware side, that means heavy-duty hinges, latches, and self-closing mechanisms that hold up to daily use instead of the flimsy hardware that fails in a year. When fencing runs alongside a home addition or a new hardscape, we coordinate materials and finishes so the whole job looks planned, not pieced together.
Our trades touch a lot of the same homes, so we’ve learned where brands wear out. In kitchens we install KraftMaid and Cambria, on roofs GAF and CertainTeed, on windows Andersen and Marvin, and on hardscapes Belgard and Techo-Bloc. The brands you’ll see on a Barrett & Sons job are ones you can verify, not a name invented for a receipt. Whether you’ve got a specific material in mind or any other make, we can help you sort out what fits your fence and your budget.
Signs You Need Fence Installation Right Now
- Posts leaning after wet weather. When the clay soaks and dries, shallow or under-set posts start to walk. A fence that leans this year will be on the ground after the next big storm, so it’s worth getting ahead of it.
- Gaps at the bottom or between pickets. Gaps let pets out and let raccoons and possums into the yard. If your dog has found the hole, you’ve got a containment problem, not just a cosmetic one.
- A gate that drags or won’t latch. A dragging gate strains the hinges and the post it hangs on, and a gate that won’t latch is a real security concern. Get it fixed before the hinge tears out of the wood.
- Rot at the posts and the bottom rail. Wood rots from the ground up, and by the time you see soft spots, the post is often already compromised. Rot near the base is the signal that a section needs replacing.
- Fence line that no longer holds the property line. If a survey shows your fence drifted onto a neighbor’s land, or you’re coordinating a shared fence, it’s time to rebuild it right. We’ll settle the line before any post goes in the ground.
Our Fence Installation Process – Step by Step
- 1
On-site measure and a written scope. We walk the property line with you, confirm the layout and gates, and put the material, height, and price in writing. Every allowance and every number lands on paper before we order anything.
- 2
Permits and code checks. On eligible jobs we pull the permits and check pool barrier and setback rules against Arlington code. The permit inspector works for you, so we want the fence to pass on the first walk-through.
- 3
Call-before-you-dig and layout. We mark utilities before a single post is set and lay out the line with string and stakes so you can see the run before we dig. If there’s a gas or water line, we find it first, not with a shovel.
- 4
Set posts and build to spec. We set posts in concrete at the right depth for our soil, hang and brace the panels square, and install gates with hardware built to last. Each stage gets checked before we move to the next.
- 5
Final walk-through and the promise. We clean the site, walk the finished fence with you, and hand over the written 90-Day Done Right Promise. If anything isn’t right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Arlington?
Fence installation in Arlington typically runs $3,500 to $9,000 for a standard residential job, with the final number depending on the material, the linear footage, the number of gates, and how much the ground fights you. A basic wood privacy fence falls near the low end, while a decorative aluminum or iron fence with custom gates lands at the high end. We give you the exact range up front, in writing, before any material is ordered.

What moves the price most: material choice, fence height, gate count, and site access. A long run through tight side yards takes more labor, and a fence around a pool with code-required gates costs more than a simple back property line. To avoid overpaying, get a written line-item estimate that separates material from labor and names the brand. Ask whether the permit and haul-away are included. Our free estimate covers the full scope, and any price change comes as a signed change order before the work happens, never as a surprise at the end. Call (888) 590-9867 for your estimate.
Fence Installation Near Arlington – Our Service Area
We install fences across Arlington and the surrounding towns, including Kennedale, Forest Hill, Richland Hills, Hurst, Bedford, Rendon, Haltom City, North Richland Hills, Colleyville, Watauga, and Fort Worth. Because we live and work in the same communities, we can usually get to an estimate quickly, and we know the soil and code quirks from town to town. If you’re nearby and wondering whether we cover your street, take a look at our Fence Installation in Kennedale and Fence Installation in Forest Hill pages, or just call and ask.
Serving Arlington, TX – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Arlington
Fence installation is setting posts below the frost-and-clay line, building the panels and gates to spec, and getting the layout and code right so the fence stands straight for years. You can do it yourself, but our North Texas clay punishes shallow posts, and pool barriers carry code rules that fail inspection if they’re off. We handle the layout, footing depth, and permits on eligible jobs so it passes the first time. Call (888) 590-9867 to talk through your project.
Most residential fence jobs take one to three days once the permit is in hand, depending on footage, material, and gate count. A simple wood privacy run on a standard lot often finishes in a day or two, while a longer decorative iron installation with custom gates can take longer. We’ll give you a realistic timeline in the written estimate, so you’re not guessing. Call for a schedule that fits your project.
Fence installation in Arlington runs $3,500 to $9,000 for a typical residential job, with the price set by material, footage, gates, and site access. Vinyl and wood land at the lower end, and aluminum or iron with custom gates sit higher. We put the full scope in writing and issue any change as a signed change order before the work proceeds. Call (888) 590-9867 for an exact quote, and estimates are free.
Yes. We install quality materials and hardware you can verify, and we’ll tell you which brands hold up in our heat and clay. We don’t push a single brand; we match the material to your budget and the job. If you’ve already picked a brand or style, bring it to the estimate and we’ll work around it. Call to talk through your options.
A leaning or damaged fence that’s letting pets out or exposing your yard is worth calling about right away, and a live person answers the phone 24 hours a day. We can’t rebuild a fence overnight, but we can get a crew scheduled fast and, in the meantime, help you stabilize a section so it doesn’t take more damage. For a storm-hit fence, we also handle Driveway & Pavers work if the storm tore up a path along the way. Call (888) 590-9867 and we’ll sort out what’s urgent.
Every completed fence is backed by our written 90-Day Done Right Promise. If a post leans, a gate sags, or a panel doesn’t look right within that window, one call brings us back to make it right. The promise is written on the contract, not buried in fine print. Call (888) 590-9867 with any warranty question.
Clear the fence line of vehicles, lawn furniture, and anything you don’t want moved, and let us know about sprinkler or irrigation lines so we can avoid them. We call to mark utilities before we dig, and we’ll handle the permit and haul-away on eligible jobs. If you have a dog, plan to keep it inside during the dig. Call us with questions before the crew arrives.
Schedule Your Fence Installation Service in Arlington Today
Whether you need a new privacy fence, a repair on a leaning post, or a pool barrier that has to pass inspection, we’ll give you a written estimate and a straight answer. Barrett & Sons is owner-operated, we pull permits on eligible jobs, and a live person answers the phone 24/7. Call (888) 590-9867 for a free, no-obligation estimate on your fence in Arlington or any nearby town. You can also start from our Fence Installation in Arlington page, and while you’re planning, see how we handle related work like Bathroom Remodeling, Windows & Doors, and Home Additions & ADU projects, or head back to our home page.
Written by the team at Barrett & Sons Construction.