A Barrett company - serving Arlington, TX

Belgard Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Belgard Fence Installation: The Arlington Owner’s Guide

Belgard doesn’t make fences. That’s the first thing Arlington homeowners need to hear, and it saves a lot of phone calls. Belgard makes pavers, retaining wall block, and hardscape units for patios, driveways, walkways, and walls. Fence installation in Arlington runs $3,500 – $9,000 installed, and we pair it with Belgard hardscape work so the fence line, the paver patio, and the driveway all read as one yard instead of three separate projects. When owners call about a “Belgard fence,” what they usually mean is one of two things: a wood privacy fence with Belgard paver columns and caps, or a fence that sits on a Belgard retaining wall or new paver apron. Either way, we build it, and we price it in writing before anything gets dug.

Call (888) 590-9867

Key Takeaways

  • Belgard is a hardscape brand (pavers, wall block, caps), so there’s no “Belgard fence panel” to order. Fences are wood, vinyl, aluminum, or ornamental steel, tied into Belgard masonry.
  • Typical installed fence range in Arlington: $3,500 – $9,000, with Belgard column and cap work priced as line items.
  • We’re an independent contractor. We install and coordinate with Belgard material. We are not Belgard, and we don’t speak for them.
  • Every price change on your scope comes as a written change order before work starts, and every eligible job gets permits pulled and inspections signed.

Which Belgard Models This Applies To

The Belgard side of a fence job is almost always column and cap material. The units we see most in Arlington backyards are Belgard Weston Wall and Belgard Brighton Wall block for pier bases, and Belgard Cambridge or Belgard Catalina pavers for the pad under the gate and along the fence line. Caps come in the matching series, and this is the compatibility gotcha: a Weston Wall cap won’t sit flush on Brighton block without a mortar bed and a trimmed course, because the coursing depths don’t line up the way a homeowner assumes. Measure the pier block face, not the cap. If the existing pier has a cap that overhangs by more than about an inch, the block below it is a different series than whoever sold you the cap.

Then there’s the fence itself. A Belgard pier is a masonry column. The panels between piers are wood (usually western red cedar, sometimes pressure-treated pine), vinyl, or aluminum picket. If your goal is a full Belgard look, the pier-and-panel design is what you want, not a Belgard-branded fence panel, because there isn’t one. Look for the mold stamp on the back of any Belgard block you’re matching. It gives you the series name and the plant code, and that’s what our crew needs to duplicate or extend a run without guessing.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Belgard Fence Installation Is Failing

North Texas heat and shrink-swell clay do more damage to fence-and-masonry work than most of what we see on the coasts. Arlington sits on expansive clay that swells in spring and shrinks hard in summer, and a fence built on a shallow pier base shows the strain first. Here’s what owners actually report when they call us.

  • Leaning Belgard piers. The pier base was set at 12 inches instead of 18 to 24 inches, or the footing wasn’t bell-shaped, so the clay has moved it. A pier that leans two degrees today will be worse by August.
  • Sagging gate on a paver apron. The Belgard paver pad under the gate settles unevenly when the base wasn’t compacted in lifts. The gate starts dragging and the latch stops catching.
  • Cracked or loose caps. Cap units that weren’t bedded in mortar or adhesive pop in freezing weather, especially after an icy February night. The crack runs along the joint, not through the block.
  • Post rot at the base. Wood posts set directly into soil, no concrete collar, no gravel drainage, rot out at the grade line in about 10 to 15 years here. A post set in concrete with the crown above grade lasts far longer.
  • Panels that rack out of square. When a masonry pier shifts, the panel between it and the next section takes the movement. Boards pull off the rails and the whole run looks wavy even though the wood is fine.

Replacement Cost & What’s Included

For Arlington, plan on $3,500 – $9,000 installed for a fence project with Belgard pier and cap work. A straightforward wood privacy fence with a handful of Belgard piers lands near the low end. Belgard-topped columns all around, gate pads in Cambridge or Catalina pavers, and a longer run push toward the top. We quote line items, not a lump sum: so many linear feet of panel, so many piers, cap units, gate hardware, footing excavation, paver pad square footage.

Line item Typical installed range
Wood privacy fence, per linear foot $28 – $55
Belgard pier with cap, per column $350 – $750
Belgard paver gate pad $450 – $1,400
Gate, hinged, with hardware $450 – $1,200
Full project, Arlington $3,500 – $9,000

What changes the number: how many piers, whether we’re matching an existing Belgard series or starting fresh, slope of the yard, and how deep we have to go for a footing that holds in Arlington’s clay. Everything is in writing. An allowance that isn’t on paper is a surprise waiting for a date, and we don’t work that way. Permits get pulled and inspections signed on any eligible job, and the finished work is backed by the 90-Day Done Right Promise: if something’s not right, Tom comes back and makes it right, one call.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely measure and photograph. Measure the face of each Belgard pier, note the series name from the mold stamp, count linear feet of fence, and take a photo of any lean or crack with a level against it. That’s information we can use. What we’d steer you away from is resetting a masonry pier yourself, and definitely pouring a new footing in a yard full of existing underground utilities, irrigation lines, and in some Arlington lots, a private service line. Digging without a call to 811 is how people hit a gas or sprinkler line and turn a fence job into an emergency. Hand-lifting a cap unit that’s bonded with construction adhesive also sends a fair number of homeowners to urgent care with a smashed finger. The honest split: you inspect and measure, we set masonry and dig footings. Call (888) 590-9867 and we’ll walk through what you’re seeing, or schedule a free estimate and let the crew do the counting.

FAQs

What Else We Install

Belgard hardscape work fits alongside the rest of what we do around Arlington: KraftMaid and Cambria in kitchens, Silestone counters, GAF and CertainTeed roofing, Andersen and Marvin windows. If your fence job turns into a patio or driveway conversation, we can write one scope with line items instead of three. We’re an independent contractor and not affiliated with Belgard, so our recommendation on material is our own.

Call (888) 590-9867 for a free estimate on your Belgard fence installation in Arlington. A live person answers, day or night, and every price change on your job shows up as a written change order before a single nail moves.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch