Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Roofing: The Arlington Owner’s Guide
We install and repair Unilock-compatible roofing across Arlington, with most roof repairs landing between $400 and $1,800 installed and full roof replacement running $8,000 to $20,000 depending on square footage and pitch. A failing Unilock roof system usually shows itself the same way in Arlington: a dark granule trail in the gutter, a shingle course that lifts at the ridge after a north wind, or a slow ceiling stain that returns after every spring storm. By the time an owner calls us, they’ve already made one trip to a big-box store and found nothing that matches the profile they pulled off their own roof.
Which Unilock Models This Applies To
Unilock’s roofing line is field-tested against North Texas heat cycling, and like any manufacturer, the parts aren’t interchangeable across series. The compatibility gotcha we run into most in Arlington is the exposure width: a standard three-tab shingle measures 12 inches of exposed face, while Unilock’s dimensional profiles run closer to 5-5/8 inches, so a mismatched course will telegraph from the street. Before we quote anything, we pull one shingle from a low eave, measure the exposure and the shingle thickness with a caliper, and check the underside label. That label carries the series designation and lot code, and it’s the only reliable way to match a part to what’s actually on your roof. If the label is gone, the measurements do the job.
For OEM replacement, we order directly through Unilock’s distribution. For aftermarket, we only spec equivalents with matching fire and wind ratings, and we’ll show you the spec sheet before we buy anything. Nothing gets ordered on a guess.
On our other trades, we also install KraftMaid, Cambria, and Silestone when homeowners need cabinets or countertops alongside the roof work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Roofing Is Failing
- Granule loss in the gutter and at downspouts. Those granules are the shingle’s UV shield, and when they shed, the asphalt underneath starts drying out. In Arlington’s July heat, that drying accelerates fast, and the shingle surface will turn visibly thirsty-looking within one season.
- Shingles lifting at the ridge. A ridge course that peels back after a north wind usually means the sealant strip never cured properly, which happens when the roof was installed in cool weather. Once the tabs lift, water gets under the course in the next rain.
- Rust streaks or dark staining on the shingle face. Galvanized fasteners that weren’t wind-rated for North Texas will corrode and streak the roof. In Arlington, we see this most on installs past the 12-year mark.
- Interior ceiling stains after a rain. A slow brown ring on a ceiling or a stain that reappears every time it rains tells you water is moving through the underlayment. The shingle above may look fine, which is why owners miss it.
- Visible fastener pops and loose courses. When the nails back out from decking that expanded in the heat, the shingle loses its hold. A popped fastener that you can see from the ground is a course waiting to blow off.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Arlington pricing for Unilock-compatible roofing work runs like this, and every line gets written into your scope before we start:
| Work | Installed Range |
|---|---|
| Roof repair (a section or a course) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
The range depends on roof size, pitch, how many layers need to come off, and whether decking needs repair after the shingles are removed. Parts are itemized separately from labor, so you see the cost of the Unilock material and the cost of the crew. Any price change after work starts arrives as a written change order first. Every eligible roof job we complete is covered by our 90-Day Done Right Promise, and our technicians bring up to 28 years of experience to the work.
DIY or Call Us?
You can safely pull a shingle from a low eave, measure the exposure, read the label, and check the price of an Unilock-compatible part. What we don’t recommend is climbing onto a roof above a one-story pitch to swap a course yourself, especially in Arlington: the heat softens shingle sealant, and a fall from roof height sends people to the hospital. This isn’t the place to save a few dollars. The decking and underlayment below the shingle have to be checked at the same time, and if you’re resealing a lifted ridge course, the nails have to be reset correctly or it lifts again next spring. Call us at (888) 590-9867 and we’ll give you a free estimate with the parts and labor lined out.
FAQs
A properly installed Unilock-compatible roof typically lasts 15 to 25 years in Arlington, but the North Texas sun and the hail that follows it will shorten that. Shingles past 15 years usually need close inspection after every hailstorm. Call (888) 590-9867 if you’re unsure of the age of your roof, and we’ll check it for you.
Yes, in most cases a section or a single course can be repaired without a full replacement. The deciding factor is whether the underlayment under that section is intact. A repair runs $400 to $1,800 for the work itself, and we’ll tell you honestly if a full replacement is the better money. Call (888) 590-9867 to get a free second opinion on any written estimate.
A small section repair is usually a half-day job, and a full course replacement on a standard Arlington roof finishes in one day if the decking checks out. If decking repair is needed, expect a second day. Call (888) 590-9867 and we’ll walk through the timing before any work starts.
We order directly through Unilock’s distribution when the series and lot match, and we verify fire and wind ratings before installing. If the original label is gone, we match on exposure and shingle thickness and show you the spec before ordering. Call (888) 590-9867 and we’ll tell you what’s available for your roof.
If you have a failing Unilock roof on your hands, the fastest path to a straight answer is a written estimate with the parts and labor spelled out. We’re an independent Arlington contractor, not affiliated with Unilock, and every eligible job gets permits pulled and inspections signed. Call (888) 590-9867 today to schedule your free estimate, and ask about our $40 off any repair over $200, our free second opinion on any written estimate, no trip charge inside the county, and our permanent 10% senior and veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.