Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Arlington Owner’s Guide
If you have a failed Unilock window or door in Arlington, we install replacement units and the hardware that goes with them, and most single-unit swaps land between $450 and $1,900 installed. Full window packages under our standard window replacement pricing run $4,500 – $15,000 in the Arlington market, and impact-rated units under the impact window installation range run $8,000 – $25,000. We’re an independent service provider, not affiliated with Unilock, so we match the part to your existing model and quote the work in writing before anything is ordered.
Owners around Arlington usually find the problem the same way. A window that used to slide now takes two hands. A patio door drags on the sill in July and won’t latch by August. You dry a foggy pane with a rag and the fog comes back on the inside. That fog is the tell: the seal between the panes has let go, and no amount of wiping brings a sealed unit back.
Key takeaways:
- Sealed-unit failure, rotted sills, and worn hardware are the three calls we get most on Unilock windows and doors in Arlington.
- Match the part to the series and the label, not to a photo on a website.
- Every price change on our work arrives as a written change order before the job moves.
- Panes and hardware are worth replacing. Springs, cables, and structural glass work are not a homeowner job.
Which Unilock Models This Applies To
Unilock has produced windows and doors across several series over the years, and the parts don’t cross between them. The glass unit (called an insulated glass unit, or IGU) is sized to the sixteenth of an inch. A unit cut for one series will not seat in another without a new sash frame, and sometimes it won’t seat at all. Hardware is just as fussy. Roller assemblies, keepers, tilt latches, and multi-point lock gearboxes change between generations, and a lock that “looks the same” often has a different backset and a different strike plate.
The fastest way to identify what you have is the manufacturer’s label, which is usually etched into the corner of the glass or printed on a sticker tucked in the head jamb or the sill track. It carries the model and series code, the glass date, and often the original glass spec. If the label is gone, we measure the opening, the sash, and the existing IGU and compare the hardware profile against known Unilock part lines. Write the numbers down before you call anyone, including us.
On the OEM question, here’s how we handle Unilock in Arlington: we quote the factory-correct part when it’s available and reasonably priced, and a quality aftermarket equivalent when the factory part is discontinued or slow to arrive. A name-brand aftermarket IGU with the right glass spec, the right spacer, and a real warranty will do the job. What we don’t do is force a mismatched part to fit and call it done. That’s how a $600 job becomes a $2,000 job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
- Fog or condensation between the panes. The perimeter seal on the IGU has failed and moisture has entered the sealed cavity. It cannot be dried or cleaned out; the glass unit has to be replaced.
- Drafts or water at the sill after a storm. Worn weatherstripping, a failed sweep on a door, or caulking that has dried out and pulled away from the frame. Small and fixable early, expensive once the sill wood gets wet.
- The door drags or won’t latch cleanly. Usually a worn roller, a sagging hinge, or a lock that’s out of alignment. In Arlington’s summer heat, frames expand, and a door that stuck all July may free up in October, which tells you it’s an adjustment problem, not a glass problem.
- Soft wood or bubbling paint at the sill or bottom rail. Water has been getting in for a while. On a door, this is the point where the cost moves from hardware to sill replacement or a full unit.
- A sash that won’t tilt, stays crooked, or has a broken latch. Tilt-latch and pivot-bar hardware wears out. Cheap and quick to replace if the part is correctly matched.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest range for Arlington on windows and doors, drawn from our standard market pricing. Every quote we write is line-item: part, labor, disposal, and any trim or seal work, listed separately.
| Job | Installed Range (Arlington) |
|---|---|
| Sealed glass unit (IGU) replacement, per unit | $450 – $900 |
| Door hardware swap (rollers, keepers, lock) | $300 – $700 |
| Single window replacement (standard) | $450 – $1,200 |
| Window replacement, full package | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What moves the number: the number of units, the series and glass spec, whether trim and sills are sound, and whether we’re matching an existing model or swapping to a current one. Part and labor are priced separately on the estimate so you can see exactly what the hardware costs. Our work carries a 90-Day Done Right Promise, written on the contract: if it’s not right, one call brings Tom back to make it right.
DIY or Call Us?
Some of this is genuinely homeowner work. You can safely clean and inspect the IGU for fog, check the label, replace weatherstripping, adjust a door roller, and re-caulk a frame that’s pulled away. Those are low-risk and worth doing yourself.
Where it goes sideways: sealed glass units are heavy, breakable, and must be set with the correct glazing tape and expansion gap or they’ll fog again within a season or two. Setting a unit tight against the frame or forcing a mismatched sash is how the first failed part becomes the second. And on doors, an aligned multi-point lock is not a thing you want to be drilling at.
If your Unilock window or door needs a sealed unit, a full replacement, or hardware you’re not sure how to match, call us. We’ll identify the part, quote it in writing, and not touch the frame until you’ve seen the number. Call (888) 590-9867 for a free estimate.
FAQs
How long should a Unilock window or door last in Arlington? Original units typically last 15 to 25 years, but the glass seal often fails first, well before the frame. In Arlington, the wide temperature swings between summer and winter work that seal harder than in a mild climate, so fogged panes on a 15-year-old unit are common and usually mean a glass-unit replacement, not a whole new window.
Can this be repaired instead of replaced? Often, yes. Fogged glass, worn weatherstripping, a dragging roller, or a worn lock can be repaired with a single part swap. A soft, rotted sill or a sash that won’t align usually means a full unit. We tell you which category you’re in after we look. Call (888) 590-9867 for a free estimate and we’ll give you an honest answer.
How long does the swap take? A glass-unit swap is usually a couple of hours. A single window or door unit is typically half a day. A full package takes several days depending on count, and we schedule it around weather. The timeline is in the written scope before we start. Call (888) 590-9867 for an exact quote.
How do you source the part? From the label and the measurements, matched to the Unilock series. If the factory part is discontinued, we quote a name-brand aftermarket equivalent with the correct glass spec and warranty and tell you it’s not OEM before you approve. You see the part number and the price on the estimate. Call (888) 590-9867 to get started.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.