A Barrett company - serving Arlington, TX

Unilock Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Fence Installation: The Arlington Owner’s Guide

Unilock fence installation in Arlington typically runs $3500 – $9000 for a residential yard, and we schedule estimates within a few days, not weeks. Unilock makes segmental retaining wall and hardscape systems, not finished fence panels, so what you’re picturing is a Unilock block product being used as the base, pier, or pillar of a fence line, with wood, aluminum, or steel panels spanning between. Owners usually find the problem the same way: a block pier has shifted after a wet spring, a cap has cracked, a post anchor has pulled loose, or a gate has started dragging because the base under it settled.

Call (888) 590-9867

Which Unilock Models This Apply To

The Unilock families that show up in Arlington fence work are the segmental wall and pillar lines: Brussels Block, Olde Quarry, Ledgestone, Pisa2, and the Estate Wall and Concord Wall systems. Each has its own dimensions, so a replacement cap or corner unit only fits the line it came from. Before you order anything, measure what you have: the face height of a single course, the depth of the block, and the length of a cap. Confirm whether the wall is a gravity system or a geogrid-reinforced one, because a reinforced pier that lost its grid behaves nothing like a stacked one. Original spec sheets list nominal dimensions; real blocks can run a fraction off after casting, so measure the block in front of you.

On OEM versus aftermarket: for Unilock the practical question isn’t brand loyalty, it’s color and profile match. A generic block that meets the same dimensions will still read as a different material in sunlight. If the run is short, matching the exact line is worth it. If the wall is a background detail, a quality compatible block is a fair call. We’re an independent contractor, not affiliated with Unilock, so we’ll source what actually fits rather than what pads a bill.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Fence Installation Is Failing

  • Cap stones cracked or lifting. Water gets under the cap, freezes once, and pops it. A loose cap is usually the first visible sign the base is moving.
  • A pier leaning out of plumb. Clay soil in Arlington swells and shrinks with our spring rain and summer drought, and a pier built without proper base depth follows the ground.
  • Post anchors pulled from the block. Expansion anchors in a block pier loosen if they were set too close to an edge, and a wood post takes that load every time the gate swings.
  • Efflorescence and white staining on the block face. Not always failure, but it tells you moisture is moving through the wall and there’s no drainage behind it.
  • Gate dragging or sagging. Nearly always a foundation issue, not a hinge issue. The base settled and the pier went with it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacing a Unilock-based fence section or pier in Arlington lands between $3500 and $9000 installed. A single block pillar reset with new anchor hardware sits at the low end. A full run with new base prep, drainage, and several piers sits at the top. The range is driven by how much base has to come out, whether geogrid is needed, and whether the block you have still matches a current line. Everything is line-itemed in a written scope before we start: block, anchors, base material, labor. Every price change gets a written change order before anyone touches the job. The work carries our 90-Day Done Right Promise.

DIY or Call Us?

You can safely inspect and measure. Check plumb with a level, measure block dimensions, photograph the labels, and note where water sits after a rain. What you shouldn’t tackle alone is resetting a pier or rebuilding a base. A segmental pier carries real load, and a block wall that fails under the wrong hands can fall on whoever’s standing beside it. Base prep and anchoring are where DIY goes wrong most often, and it’s also where a proper install pays off. Tom Barrett publishes his name, address, and license number, and permits get pulled and inspections signed on every eligible job. Call us at (888) 590-9867 for an honest read.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch