A Barrett company - serving Arlington, TX

Tremron Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Driveway & Pavers: The Arlington Owner’s Guide

Tremron paver driveways installed here run $7,000 – $18,000 for a typical Arlington driveway, and the pavers themselves are compatible with what you already have on the ground. Tremron makes segmental concrete pavers in several series, and the family of products hasn’t changed much in 20 years, which is good news for anyone replacing a damaged section instead of the whole driveway. Most owners find us after a specific failure: a wheel track that’s sunk two inches, a paver that cracked after last February’s freeze, or efflorescence that’s spread across the surface and won’t scrub off.

Call (888) 590-9867

We’re Barrett & Sons Construction, and we’re an independent Arlington contractor. That means we install Tremron-compatible materials and we always say so plainly: we’re not affiliated with Tremron and we don’t claim to be their factory rep. What we are is a crew that’s laid paver driveways in Arlington since 1998 and knows how these products behave in North Texas heat and clay.

Key Takeaways

  • Tremron paver driveway installation in Arlington: $7,000 – $18,000 installed.
  • Individual paver replacement or section repair is a fraction of that – call for a written quote.
  • Clay soil and freeze-thaw cycles in Arlington punish a bad base more than they punish the paver itself.
  • Efflorescence is a base or drainage signal, not a dirty surface.

Which Tremron Models This Applies To

Tremron’s residential driveway line is organized by shape, not by a single model number stamped on the back of the paver. The main series you’ll find on Arlington driveways are Tremron’s Mega Olde Towne (a larger format paver, often 6×9 or 6×12 in a tumbled finish), Tremron Stonewall (a stacked-stone profile, mostly used on retaining walls but sometimes on aprons), and Tremron’s Olde Towne and Weston series, which are smaller and more common on patios and walkways. The series name is printed on the box if you have the original, or you can measure the paver’s face dimensions and thickness – Tremron’s standard residential thickness is 2-3/8 inches, and it’s been that thickness for years, which means a paver you buy today will sit flush next to one that’s 15 years old.

Here’s the gotcha: Tremron’s colors are produced in batches, and an Olympia or Sedona blend from a 2010 install won’t match a fresh pallet exactly. The base color reads the same, but the accent pavers shift. For a repair, we pull the failed pavers from a less visible spot on your driveway and blend them into the replacement, which keeps the color consistent without replacing the whole field. On OEM versus aftermarket: Tremron pavers are the standard, but a compatible segmental concrete paver from another manufacturer can be matched by dimension and color for small repairs. For a full driveway install, we spec Tremron because the color and finish options are more consistent across pallets. If you’re also updating the rest of the exterior, we carry KraftMaid, Cambria, and Silestone on the interior side and are happy to talk through a full property plan.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Paver Driveway Is Failing

  • Rutting or sinking in the wheel tracks. That’s almost never the paver – it’s the base underneath. Arlington’s expansive clay soil swells and shrinks with the seasons, and if the original base wasn’t compacted to at least 4 inches of crushed stone, the whole field moves. You’ll see it first where tires land.
  • Efflorescence that keeps coming back. A white, powdery bloom on the surface is mineral salt pushed up by water migrating through the paver. A scrub with white vinegar clears it once; a bloom that returns within a season means water is getting under the pavers and has nowhere to drain. That’s a grading or base problem, not a cleaning problem.
  • Cracked pavers after a freeze. North Texas gets enough hard freezes to crack a paver that has a hairline weakness. A single cracked paver in a field is normal wear; five or six in a cluster usually points to a low spot where water pooled and froze.
  • Loose, rocking pavers at the driveway apron. The apron where the driveway meets the street takes the most traffic and the most water runoff. Polymeric sand joint sand that’s worn away lets the pavers shift, and once a paver rocks, the joint sand under it is gone.
  • Weeds in the joints, or the joint sand washing out. Polymeric sand has a lifespan of roughly 5-8 years in this climate. When it thins, water gets into the joints and the joint fails. Re-sanding sounds simple, but the base has to be dry and the existing joints have to be cleaned properly or the new sand will fail within a year.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what a Tremron paver project runs in Arlington, using the same published ranges we use across the site:

Scope Installed Price
Paver driveway installation (Tremron-compatible) $7,000 – $18,000
Paver patio installation $3,500 – $11,000
Driveway replacement (concrete or paver) $5,000 – $14,000
Concrete driveway installation $4,500 – $12,000
Driveway sealing (post-install protection) $250 – $700

The installed price covers excavation, base prep, compacted crushed stone, paver installation, polymeric joint sand, and edge restraints. What moves you within the range: driveway square footage, how much existing concrete or asphalt has to be torn out and hauled, and how much grading the site needs. We pull permits and pass inspections on every eligible job, and every price change arrives as a written change order before the work proceeds. The labor is covered by the 90-Day Done Right Promise – written on your contract, one call and we come back.

DIY or Call Us?

An owner can safely do a few things: pressure-wash the surface on a low setting, inspect the joints for missing polymeric sand, and check the apron for rocking pavers. What you don’t want to DIY is base work. A paver driveway that fails on the base has to be torn up, re-graded, and recompacted. That’s a machine job, and if it’s done over Arlington’s clay soil without proper compaction in lifts, the failure repeats in one or two seasons. Polymeric sand installation is also more finicky than it looks – the joints have to be bone-dry or the sand won’t lock, and a rain shower on a freshly swept joint will waste the whole pallet.

For anything past surface inspection, call us. We’ll come out, look at the failure, and give you a written estimate at no charge. Free second opinion on any written estimate is standing policy. Call (888) 590-9867 to schedule.

FAQs

How long do Tremron pavers last in Arlington?
A well-installed Tremron paver driveway lasts 25 – 30 years in Arlington, and the pavers themselves often outlast the base. The failure point is almost always the base or the joint sand, not the concrete paver. Call (888) 590-9867 for an exact quote – estimates are free.

Can a damaged paver driveway be repaired instead of replaced?
Yes, in most cases. Individual pavers can be lifted and replaced, joints re-sanded, and a low spot re-graded without replacing the whole field. A full replacement is only necessary if the base has failed across a large area. We’ll tell you which one you’re facing after we look at it.

How long does a repair or partial replacement take?
A single-section paver repair is typically a one-day job. A full driveway installation runs 3-5 days depending on square footage and tear-out. We’ll give you a written schedule with the estimate, and we don’t start until you’ve signed off on both scope and price.

How do you source the Tremron pavers?
We source through suppliers who stock Tremron’s residential series, and we match color by pulling from the existing field where possible so the repair blends. On a full install, we spec the series and blend with you in writing before the first pallet arrives. Call (888) 590-9867 – we’ll walk you through it.

If you’re ready to stop looking at a cracked apron or a sunken wheel track, call Barrett & Sons Construction Arlington at (888) 590-9867 to schedule your free estimate. We publish the license number, the address, and the standing offers for a reason: look them up before you sign anything. Our technicians have up to 28 years of experience, every price change comes in writing, and the 90-Day Done Right Promise is on every contract. Call today – a live person answers.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch