Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Arlington Owner’s Guide
Tremron is a hardscape and paver brand, not a cabinet or countertop line, so “Tremron kitchen remodeling” in Arlington usually means one thing: pavers or a paver-topped island/peninsula surface that’s cracked, settled, or stained and needs replacement matched to your existing style. Paver-level kitchen surfacing and matching restoration typically runs $14,000 – $45,000 installed for a full kitchen scope, and Tremron-compatible paver replacement is scheduled on planned timelines, not same-day. Owners usually find the problem the same way: a hairline crack through a clay paver on the island face, a corner that lifted after a wet spring, or a dark stain that won’t scrub out after a grease spill.
Which Tremron Models This Applies To
Tremron makes several paver and wall-block lines that get used in kitchen-facing applications: the Olde Towne, Belgian, and Paseo-style paver series for floors and island faces, and the Colonial and Belair wall-block lines for raised terrace or pass-through wall caps. Compatibility isn’t a matter of matching just the color name. The Olde Towne series has been produced in different thickness and dimensional tolerances across production runs, so a “Charcoal” Olde Towne paver bought today may not butt cleanly against a 2010-era Charcoal paver. That’s the gotcha most folks miss.
Identify what you have by pulling one intact unit and measuring length, width, and thickness to the sixteenth of an inch, then check the underside or edge for the stamped Tremron identification. Compare that against the current spec sheet before you order.
OEM vs. Aftermarket for Tremron
Tremron pavers are an OEM-match problem: the cleanest outcome is replacing with current production of the same series and color, accepting that older and newer stock may not be perfectly identical in tone. A quality aftermarket clay or concrete paver can serve as a full-area replacement substrate if you’re redoing an entire island face or floor, but mixing aftermarket units into an existing Tremron field leads to visible tonal inconsistency and joint-width mismatches within a season. For partial repairs, we order the current Tremron series and blend in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Kitchen Remodeling Is Failing
Arlington’s shrink-swell clay soils and summer heat cycles do a number on any paver surface, and a kitchen paver floor or island face takes it worse than a patio because it’s indoors or covered but still sits over the same foundation that moves.
- Hairline cracks running across a paver. Expansion and cycling stress, not impact. Cracked units need replacement before water gets into the bedding layer.
- Corner lifting or rocking pavers. Base settlement from soil movement or a failed edge restraint. If a paver rocks underfoot, the base beneath it is already compromised.
- Joint sand washing out. Failed polymeric or regular joint sand lets water in and weeds start. Usually the first sign before settlement shows.
- Staining that won’t lift. Grease, oil, or acid-based cleaner damage to the paver face. Sealed surfaces fail faster in kitchens than exterior patios because of splatter and frequent wet cleaning.
- Efflorescence returning after cleaning. White mineral bloom that keeps coming back usually means water is still moving through the bedding layer, not a cosmetic issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Tremron-compatible paver work runs on a kitchen in Arlington, installed. Numbers are labor plus material, so you see where the money goes.
| Scope | Installed Range |
|---|---|
| Full Kitchen Remodel (incl. paver surface work) | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
The range is driven by how much existing paver has to come out, whether the base and edge restraint are sound, and whether you’re matching a partial field or redoing the whole surface. Every scope, every allowance, and every price change arrives as a written change order before work happens. If it’s not done right, our 90-Day Done Right Promise is on the contract: one call and Tom comes back to make it right. Permits are pulled and inspections signed on any eligible job.
DIY or Call Us?
Replacing a single cracked paver face in a row you can access is a real project many homeowners can handle: pry the unit free, scrape the old bedding, reset on fresh compacted base, re-sand the joint. What goes wrong is judging the base. If a paver is rocking, the problem is under it, and forcing a new unit on top of a failed bedding layer just cracks the replacement within a season. If the issue is a cracked unit in a wall cap, or water is showing up in the joint after rain, that’s a base and drainage problem, not a surface swap. That’s the point to call. Poor base work on a kitchen paver floor is a much bigger repair than the paver itself, and it’s not a place to learn by trial.
Frequently Asked Questions
Under dry, covered conditions, a well-installed Tremron paver field will last well past twenty years; the weak point is never the paver itself, it’s the base and joint sand. Pavers that rock, settle, or wash out joints inside ten years usually reflect a base that was never compacted to spec or an edge restraint that failed. In Arlington, the soil movement and clay undersoil makes the base quality the whole story.
Cracked pavers cannot be repaired structurally; they must be replaced. Surface staining can often be cleaned and resealed. Settled units can sometimes be lifted and reset if the base is still sound, but once a paver is fractured through, any patch just spalls further with heat cycling. Replacing the unit and re-sanding the joint is the durable fix. Call (888) 590-9867 for a free estimate on the scope.
A single-unit or small-field replacement typically takes half a day once the material is on hand. A full island face or kitchen floor rework takes two to four days including base prep, re-sanding, and clean-up. The timing depends on how much base repair is needed, not on the number of pavers. We give a written schedule before day one.
We match by measuring the existing unit and confirming the series against Tremron’s current specs, then ordering the current production of the same line. We don’t claim to keep Tremron parts on a truck or in a local stock, so lead time depends on the series and color; most orders arrive within one to two weeks. Material is on the written scope, so there’s no surprise on the invoice.
If you’re in Arlington and looking at a cracked, rocking, or stained Tremron kitchen surface, the honest answer is to get eyes on it before deciding whether it’s a paver swap or a base repair. Call (888) 590-9867 for a free estimate – we’ll pull the specs, measure the unit, and quote you a written scope with pricing you can trust. We’re an independent service provider, not affiliated with Tremron, and we also handle KraftMaid, Cambria, and Silestone work when your kitchen scope goes beyond the pavers.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.