A Barrett company - serving Arlington, TX

Techo-Bloc Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Techo-Bloc Driveway & Pavers: The Arlington Owner’s Guide

We install Techo-Bloc-compatible driveway and paver systems across Arlington. A full paver driveway installation typically runs $7,000 – $18,000; a paver patio runs $3,500 – $11,000. We schedule estimates fast and written quotes are free – call (888) 590-9867 and we’ll get a date on the calendar. Barrett & Sons Construction is an independent installer and is not affiliated with Techo-Bloc.

Call (888) 590-9867

Owners usually figure out something is wrong the same way. A line of pavers in the driveway starts to rock when the truck rolls over it. A patio edge near the slab heaves up a half inch after a wet spring. Weeds push through a joint that was tight last summer, or a low corner of the walkway holds water for two days after a rain. Techo-Bloc pavers themselves are tough. When a system fails in Arlington, the problem almost always lives under the surface: base prep, edge restraint, or the joint sand.

Key Takeaways

  • Installed paver driveways in Arlington: $7,000 – $18,000. Patios: $3,500 – $11,000. Sealing: $250 – $700.
  • Techo-Bloc pavers don’t usually crack. The base and edge restraint do the failing.
  • We pull permits where the job requires it and give you a written change order before any scope shift.
  • Every completed hardscape job is backed by our written 90-Day Done Right Promise.

Which Techo-Bloc Models This Applies To

Techo-Bloc runs several paver families, and each has its own thickness, face, and profile. The ones we see most on Arlington driveways are the Blu 60mm and Blu 80mm lines, the Villa and Village profiles, the larger-format Industria system (with its pedestal and slab components), and, on older patios, the tumbled Antika and Semma lines. If your home was built in the 1990s or early 2000s, there’s a fair chance you’re looking at a discontinued profile whose exact match is no longer sold.

The fastest way to sort out what you have is to pull a single paver and measure it. You want thickness first (60mm and 80mm are the two common driveway specs, while patios are often 60mm), then face dimensions, then color name from a sample. Some pavers, especially older ones, carry a stamp or a mold mark on the underside. If you can’t read it, a photo with a tape measure laid across the face does the job.

On the replacement question, Techo-Bloc pavers are a case where OEM matters more than it does for most products. Colors drift between production runs, so a 2024 “Champlain Grey” is not guaranteed to match a 2009 “Champlain Grey” sitting in your driveway. When a match is impossible, the honest move is a decorative border, a pattern break, or a small band of contrasting pavers around the repair. We’d rather design that transition into the job than pretend a color match will be perfect. To see how this plays out on Arlington properties, ask us for photos of a blended repair we’ve done.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Techo-Bloc Driveway & Pavers Is Failing

Most paver failures look alike from the curb. Here’s what the symptom is actually telling you.

  • Pavers rocking underfoot or under tires. The bedding layer has settled unevenly or washed out. In Arlington’s clay-and-limestone soils, water finds the soft spots and hollows them out, so a “loose paver” is often a drainage clue before it’s a paver problem.
  • Weeds or sand loss in the joints. The joint sand has washed or blown away and left voids. Once the sand is gone, water gets straight into the base and the next freeze-thaw or heavy rain makes it worse.
  • Heaving, tenting, or a lip at the edge. The edge restraint has shifted or failed. Without a locked edge, the whole field can spread outward a fraction of an inch per season, and pavers at the perimeter lift.
  • Ponding water or a persistent wet spot. Slope has flattened or a low spot has developed. Standing water is what destroys the base below.
  • Cracked or chipped pavers at driveways and turnarounds. Point loads from heavy vehicles on a base that isn’t thick enough or wasn’t compacted in lifts. This one points to the install, not the paver.

If two or more of those show up in the same area, the fix is usually deeper than swapping a few stones. Diagnosing that before we quote is how we keep the job from turning into a surprise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Arlington, expect to pay $7,000 – $18,000 for a full Techo-Bloc paver driveway installation and $3,500 – $11,000 for a paver patio. If we’re replacing a driveway rather than installing new, the range is $5,000 – $14,000; if the job is mostly freshening up the surface, sealing runs $250 – $700. A concrete driveway, for reference, is $4,500 – $12,000 and asphalt is $3,500 – $9,000, which is the honest comparison if you’re weighing materials.

What drives your number up or down:

  • Square footage and access. A wide driveway with a curve and a tight back gate costs more in labor than an open rectangle.
  • Base depth and haul-off. Clay soils and a failed base mean excavating and hauling off old material, which is real money and real time.
  • Paver profile. Larger-format Industria-style systems cost more per square foot than standard Blu 60 or 80mm pavers.
  • Edge restraint and drainage. A proper concrete or polymer edge, and any regrading or new drainage, is included in the quote, not bolted on after the fact.

We put everything in writing: scope, allowance for any decorative pieces, and a written change order before anything shifts. No phone quote that becomes a different bill at the door – that’s the whole reason we do it this way. Ask about our Free Second Opinion on Any Written Estimate, our $40 Off Any Repair Over $200, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount. Every completed job is backed by the written 90-Day Done Right Promise.

DIY or Call Us?

You can safely do a few things yourself. Walk the pavers and tap them; if a handful rock and the rest of the field is tight, you’re looking at a local repair. Pull one paver and measure thickness and face so you can match color. Rake or sweep a little joint sand into a low joint as a stopgap. That’s about the safe ceiling.

Where DIY goes wrong on Techo-Bloc pavers is the base and the edge. Resetting a paver over a hollow spot without fixing the base underneath just moves the problem a foot sideways. A driveway or patio is a system – base material compacted in lifts, the right joint sand, a locked edge restraint, and slope that actually drains away from the house. Get one of those wrong and the whole thing fails again, usually sooner than the first time. And on a driveway, a bad base can crack the pavers, not just loosen them. We’ve got up to 28 years of technician experience on these systems and we’d rather diagnose the cause than re-lay the symptom. Call (888) 590-9867 and we’ll get out to look at it.

FAQs

How long should a Techo-Bloc paver driveway last in Arlington? A properly installed Techo-Bloc paver driveway typically lasts 20 to 30 years or more, because the pavers themselves hold up very well in North Texas heat and sun. The lifespan is really set by the base and edge restraint – if those were done right, the surface outlasts most owners’ plans for the house. If yours is failing early, that’s the diagnostic target. Call (888) 590-9867 for a free look.

Can it be repaired instead of replaced? Often, yes. A localized sunken area, a few loose pavers, or a failed edge restraint can be repaired without tearing out the whole driveway, and the repair usually costs a fraction of full replacement. The honest answer depends on how widespread the base failure is – a single bad spot is repairable, but a driveway where three out of four pavers rock means a base problem that a patch won’t fix. We’ll tell you which you’re looking at. Call (888) 590-9867 for a free estimate.

How long does the swap or repair take? A small paver repair is typically a one-day job. A full driveway or patio installation is usually a multi-day project once you factor in excavation, base prep, compaction, laying, cutting, and joint sand – and if it rains, everything waits, because you can’t lay pavers over a wet base. We’ll give you a realistic window in writing with your quote. Call (888) 590-9867 to schedule a free estimate.

How do you source the replacement pavers? We match your existing Techo-Bloc profile by thickness, face dimensions, and color name, and we pull the material from Techo-Bloc distributors. Where a discontinued profile or a color run can’t be matched exactly, we plan a visible border or pattern break so the repair looks intentional rather than patched – and we tell you that up front, not after the pallet lands in your yard. If you’re also weighing other surface materials, we install KraftMaid for interiors, Cambria and Silestone for countertops, and Belgard and Techo-Bloc for hardscapes – the same written-scope, permits-pulled, change-order approach on all of it. Call (888) 590-9867 to get started.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch