Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Bathroom Remodeling: The Arlington Owner’s Guide
Techo-Bloc makes hardscape and masonry products, paver lines, retaining wall blocks, and precast steps, not bathroom fixtures. So the honest answer up front: if a Techo-Bloc product is part of your bathroom project in Arlington, it’s almost always on the floor, a threshold, a shower curb, or a decorative wall detail built from paver or block stock. A full bathroom remodel in Arlington runs $9,000 to $28,000 installed, and we can typically get out to look at a failed piece within a day or two, not weeks. Owners usually find the problem the slow way: a grout line that keeps cracking, a paver edge that’s lifted, or a piece of stone that’s come loose at the shower curb and now holds a puddle.
Which Techo-Bloc Models This Applies To
Most Techo-Bloc bathroom work in Arlington uses the thinner, tighter-tolerance lines. The two you’ll see most on floors and shower curbs are the Blu 60 mm pavers (a 2 3/8-inch-thick slab, often called a “60 mil” in the trade) and the smaller INCA slab, both of which sit flush in a wet area when the base is right. Wall and detail pieces come from the retaining wall lines, Semma, Mini-Creta, and the Brandon block. Here’s the gotcha: a standard exterior paver and a bathroom paver can look identical but carry different face thicknesses, and swapping one for the other throws off your threshold height by an eighth to a quarter inch, which is enough to pool water. Read the stamp on the back of a loose piece, or measure the face. Model numbers are molded into the block, not printed. For a match, measure face length, face width, and thickness with a tape and bring those three numbers to the yard. On OEM versus aftermarket: Techo-Bloc stock is the right call for anything load-bearing or visible in a large field. For a single repair piece in a corner or along a curb, a quality aftermarket equivalent cut to the same dimensions works fine and saves you a special order and a wait. We’re an independent service provider and not affiliated with Techo-Bloc, so we match your existing stock rather than steering you to a brand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Bathroom Remodeling Is Failing
- Repeating grout cracks along the floor field. Usually not the grout’s fault, it’s substrate deflection or a missing movement joint at the perimeter. Warm, humid Arlington summers push a lot of expansion into a tight floor.
- A loose or rocking piece near the shower curb. Water has gotten under the setting bed. That’s a waterproofing breach first and a paver problem second.
- Efflorescence, the white chalky film, on the face. Moisture migrating through the block from behind. Comes back until the source is stopped, not until you scrub it.
- Lipped edges, one piece sitting proud of its neighbor. Base prep issue, thin-set or mortar that dried before the piece seated, or a slab that’s wedged against a wall with no room to move.
- Ponding or slow draining at a threshold or floor transition. The slope is off, often because the paver thickness was swapped for a mismatched replacement piece years ago.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Techo-Bloc bathroom remodel in Arlington, the full project lands between $9,000 and $28,000. A small bathroom remodel sits in the $5,000 to $12,000 range. A walk-in shower installation runs $4,500 to $12,000, and a straight shower replacement is $3,000 to $8,500. What drives the number: how much of the floor and shower needs to come out, whether the waterproofing behind it failed too, and whether you’re matching discontinued stock. A single paver or curb repair is small money, a floor field replacement is not. Every scope, allowance, and price change lands in a written change order before a piece is pried loose. You’ll get a written line-item quote, permits pulled and inspections signed on eligible jobs, and our 90-Day Done Right Promise on the work. Our crew members have up to 28 years of experience, and this is owner-operated, not dispatched labor.
DIY or Call Us?
You can safely pull a loose paver or slab up by hand and set it aside, take a photo of the setting bed, and measure it. You can check for a hollow sound by tapping the floor field with a screwdriver handle. Where DIY goes wrong in Arlington on these jobs is the reset itself. Getting slope right in a wet area, restoring waterproofing at a curb, and matching a discontinued Techo-Bloc face so a repair piece doesn’t telegraph are all things you only learn after a few dozen installs. A resurfaced or just-mortared replacement typically fails again within a season because the water never stopped. Call (888) 590-9867 and we’ll look at it before you buy a single piece. Free second opinion on any written estimate, and no trip charge inside the county.
FAQs
Fifteen to twenty-five years when the base and waterproofing are done right. In Arlington’s clay-heavy soil and humid summers, the weak points show up first, a failed curb waterproofing or a missing movement joint, and the Techo-Bloc piece outlasts the assembly around it. Call (888) 590-9867 for an exact quote on your repair.
Often, yes. A single cracked or loose piece can be lifted and reset if the setting bed is sound and you can match the face and thickness. If the waterproofing behind a shower curb or floor is compromised, a patch just delays the same failure. We’ll tell you honestly which one you’re looking at, in writing, before we start.
A single piece repair is typically a half day to a day, most of it cure time. A shower or floor field replacement in a smaller bathroom runs three to seven working days depending on scope and drying time. You’ll get the schedule in writing up front with the written change order if anything shifts.
We measure face length, width, and thickness off your existing stock, then match it to current Techo-Bloc lines through the local yard, or to a quality equivalent cut to the same dimensions if the line’s been discontinued. We don’t claim to carry parts on a truck, and we don’t stock Techo-Bloc. We source it for your job, you see the line item, and we don’t swap in a mystery brand.
Call (888) 590-9867 for a free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.