A Barrett company - serving Arlington, TX

Techo-Bloc Home Additions & ADU in Arlington, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Techo-Bloc Home Additions & ADU: The Arlington Owner’s Guide

If you’re planning a Techo-Bloc home addition or ADU in Arlington, expect to pay roughly $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, priced with a written, line-item scope before work starts. Smaller projects sit lower on that range: a garage conversion runs $30,000 – $80,000. Techo-Bloc itself doesn’t make wall systems or framing, so the brand enters your project through the hardscape and veneer work at the base, walkways, patios, and retaining walls that anchor the structure. Owners usually discover a problem here in one of two ways: a paver apron starts settling away from the slab, or the segmental retaining wall behind the addition begins to lean after a run of North Texas clay movement. This guide is for Arlington homeowners who already know the plan and want the installation done to spec, with the right materials and the permits pulled.

Call (888) 590-9867

Which Techo-Bloc Models This Applies To

Techo-Bloc hardscape products most often tied to an Arlington addition or ADU include the Blu 60mm and Villagio 60mm pavers for patios and walkways, Victory and Semma wall blocks for retaining and planter walls, and the Para and Mini-Creta lines for architectural wall faces and steps. Each line has a fixed height and a specific unit footprint, and the failure you’re chasing usually traces back to a unit of the wrong height boxed in during a prior install, or a retaining wall built without the correct geogrid setback. To identify what you have, measure the exposed face height and the unit width in inches and compare against the published spec sheet; that tells you whether a repair can reuse the existing course or has to rebuild a full run. On the OEM question: Techo-Bloc units aren’t interchangeable across series, so a matching-cast aftermarket block rarely seats cleanly against the original. We specify the correct Techo-Bloc series for your wall and paver field and confirm the model before ordering. We’re an independent installer and not affiliated with Techo-Bloc.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Techo-Bloc Home Additions & ADU Is Failing

  • Pavers settling or rocking at the addition’s edge. The base wasn’t compacted to depth or the subgrade is clay that swells after rain, so units shift and the joint sand washes out. In Arlington, we see this most on south-facing aprons that bake all summer and take runoff hard in spring.
  • Retaining wall leaning outward. The wall was built without geogrid or a proper gravel drainage column, so hydrostatic pressure from trapped water pushes the face forward. A lean beyond a couple of degrees means the base course needs rebuilding, not just re-stacking.
  • Wall units cracking or spalling at the face. Freeze-thaw cycles in DFW are mild but real, and a block that absorbed water before sealing can pop its face over a few winters. Spalling near the top course usually points to a missing cap or a drainage gap.
  • Steps and stoops pulling away from the slab. The Techo-Bloc step treads were set on a base that wasn’t tied into the foundation, so seasonal movement opens a joint. This is a trip hazard and the first thing an inspector flags.
  • Efflorescence or white haze that won’t wash off. Mineral salts migrating through the block mean water is getting in behind the wall and staying there. Left alone, this is the same moisture that undermines the wall base.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For an Arlington Techo-Bloc home addition or ADU hardscape scope, plan on the $45,000 – $130,000 addition range or the $90,000 – $220,000 ADU range, with the hardscape portion (paver fields, retaining walls, steps, veneer) quoted as its own line so you can see exactly what the Techo-Bloc material and labor cost. A retaining wall rebuild, paver replacement, or step re-set typically falls within that overall scope and gets priced separately from framing and finish. What drives the range: wall length and height, soil conditions in your part of Arlington, whether geogrid and drainage are added, and paver pattern complexity. We quote parts and labor transparently, in writing, with every allowance on the page. Any price change comes as a written change order before work happens, because the allowance that isn’t on paper is a surprise waiting for a date. Every completed job carries the written 90-Day Done Right Promise – if it’s not done right, one call brings Tom back.

DIY or Call Us?

Some checks are safe and smart to do yourself: measure the paver or block face, photograph the lean or crack, note where water pools after a storm, and pull your plat to see the setback rules for an Arlington addition or ADU. Where DIY goes wrong is the rebuild. Retaining walls and addition bases carry real loads, and a wall that fails under a structure is a serious safety and permit problem, not a cosmetic one. Lifting and resetting segmental units by hand can pinch or crush, and doing it without geogrid and drainage just resets the same failure. We handle the structural and hardscape work, pull the permits, and get inspections signed. If you’re not sure whether it’s a repair or a rebuild, call (888) 590-9867 and we’ll tell you straight.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch