A Barrett company - serving Arlington, TX

Cambridge Pavers Bathroom Remodeling in Arlington, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambridge Pavers Bathroom Remodeling: The Arlington Owner’s Guide

We install Cambridge Pavers-compatible bathroom remodeling in Arlington, and a full bathroom remodel here typically runs $9,000 – $28,000 installed. Smaller scopes, like a vanity refresh or a single wet-area rebuild, land at the low end; a full gut with a walk-in shower and new tile sits at the top. If you’re reading this because something failed, you’re in the right place.

Call (888) 590-9867

Most Arlington owners don’t find this problem on a schedule. They find it when a floor paver in the bathroom rocks underfoot and a grout line opens up, or when water starts pooling at the base of the shower wall after a rainy week. Ramsey and Pantego homes built in the 1980s and 90s are the most common callers; the substrate under the pavers has usually been moving for a while before anyone notices. By the time it’s visible, the fix is rarely just the surface piece.

One thing up front: Barrett & Sons Construction Arlington is an independent remodeling contractor. We are not affiliated with Cambridge Pavers, and we don’t claim to be.

Key Takeaways

  • Installed bathroom remodel in Arlington: $9,000 – $28,000 for a full scope.
  • If pavers are rocking or water is pooling, the substrate is almost always the real failure, not the paver.
  • We source Cambridge Pavers-compatible materials per job; we don’t stock parts and don’t carry them on a truck.
  • Permits pulled and inspections signed on every eligible Arlington job.
  • Every price change comes in writing before anyone touches the job.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Which Cambridge Pavers Models This Applies To

Cambridge Pavers makes interlocking concrete pavers across several product lines, and the bathroom-appropriate ones are the smaller-format units – generally in the 4×8, 6×6, and 6×9 face sizes – set over a prepared mortar bed or a bonded substrate. The line you’re matching matters because thickness and edge profile vary by series. A paver spec’d for a driveway at 2 3/8 inches isn’t the same unit you want on a shower floor, and it’s not meant to be.

Here’s the compatibility gotcha that bites Arlington owners: the color name on your original invoice and the current color name on the spec sheet are not always the same color. Cambridge has retired and renamed several blends over the years. Before you order anything, pull a single paver up and look at the back for a mold stamp, then measure the actual face and thickness with a tape – not with the number from memory. That measurement is what gets matched, not the name.

On the OEM-versus-aftermarket question – for a bathroom floor or wall, an equivalent quality concrete paver that meets the same thickness and compressive spec is fine. What matters is the substrate and the setting method, not the brand cast into the back. We’ll tell you plainly when a matching Cambridge unit is worth sourcing and when a spec-equivalent will last just as long in a bathroom application. We don’t stock parts, so the right unit is ordered per job and delivered to your address in Arlington.

Signs Your Cambridge Pavers Bathroom Remodeling Is Failing

  • Pavers rocking underfoot. Movement means the mortar bed or substrate has cracked or the bond has broken. In Arlington, seasonal soil movement on clay-heavy ground is the usual culprit, and it shows up first at the room’s perimeter.
  • Grout lines opening at the shower base or wall. A hairline crack is normal settling; a gap you can slide a nickel into is water getting behind the paver. That water has nowhere to go except into the wall cavity.
  • Water pooling at the shower or tub edge. Pooling means the slope is wrong or the drain plane has shifted. This one causes the most damage fastest because it’s slow and quiet.
  • Efflorescence – white powdery streaks on the paver face. That’s salt migrating out from moisture trapped under the paver. It’s a symptom, not a stain, and cleaning it doesn’t fix the source.
  • Hollow sound when you tap the paver. A dull thud means the paver is no longer fully bonded. Tap a few; consistent sound is fine, a dead spot is a lift waiting to happen.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Arlington, bathroom remodel pricing runs $9,000 – $28,000 for a full scope. What moves the number: the size of the room, whether the substrate needs a full tear-out, the paver selection and any matching to an existing blend, and whether plumbing or electrical is being relocated. A small bathroom remodel – a single wet area, no layout change – lands in the $5,000 – $12,000 range. A walk-in shower installation alone runs $4,500 – $12,000; a tub-to-shower conversion runs $3,500 – $10,000.

Every quote is line-itemed. Material, labor, disposal, and permits are separate lines, not one rounded number. If a scope change comes up mid-job – and on substrate repairs it sometimes does – you get it in writing as a change order before anyone picks up a tool. The allowance that isn’t on paper is a surprise waiting for a date; we don’t do that. Every completed job carries the written 90-Day Done Right Promise.

DIY or Call Us?

What you can safely do yourself: tap-test the pavers, photograph the cracks, check for soft spots in the drywall near the shower, and look at the back of one lifted paver for the mold stamp. That’s diagnostic work and it helps you get an accurate quote.

What goes wrong with DIY on this job: a paver set over a failing substrate looks fine for a month and then does exactly what the old one did. Bathroom floors and shower walls are a waterproofing system, not a surface. Skip the prep and you’re paying twice. If you smell gas, or if the failure involves electrical near the wet area, stop and call a licensed professional – that’s not a weekend project.

For everything else, call (888) 590-9867 for a free estimate. A live person answers, 24 hours a day.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch