A Barrett company - serving Arlington, TX

Cambridge Pavers Roofing in Arlington, TX

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambridge Pavers Roofing: The Arlington Owner’s Guide

Replacing a failed Cambridge Pavers roofing component in Arlington typically runs $400 – $1,800 for a repair and $8,000 – $20,000 for a full roof replacement, depending on how much of the system has failed and whether the underlying deck is sound. Cambridge Pavers makes hardscape and paver systems, not roofing shingles or panels, so when we get a call like this in Arlington, nine times out of ten the problem is where a Cambridge Paver detail meets the roofline, a ridge, a parapet, or a flat roof edge, not the paver itself. Owners usually discover it the same way: a brown water stain spreading across a ceiling after a hard North Texas rain, granules or sealant flaking off onto the pavement below, or a soft spot that shows up when someone climbs up to clean the gutters. Call (888) 590-9867 and we’ll take a look and give you a written estimate.

Call (888) 590-9867

Which Cambridge Pavers Models This Applies To

Cambridge Pavers is best known in Arlington for its paver and hardscape lines, and the roofing-adjacent failures we see almost always trace back to how a paver detail was tied into a roof or parapet: cap stones at a parapet wall, paver coping along a flat roof edge, or a paver system used on a roof deck or terrace over living space. If your Cambridge Paver product is part of a roof-deck or parapet assembly, the failed part is usually a sealant joint, a flashing, a coping stone, or a fastening detail rather than the paver itself. Identify your exact series by the label on the original pallet invoice, the stamped marking on the stone, or a measured face dimension; Cambridge ships multiple profiles that look nearly identical from the ground but differ a few millimeters in thickness and joint width, and guessing the wrong match is the fastest way to a leak that comes back. For this reason, matching a Cambridge Pavers detail on a roof requires the actual measurements and, ideally, the original spec sheet, not a photo from a phone.

On the OEM-versus-aftermarket question: Cambridge Pavers does not manufacture roofing shingles or membrane, so there is no true “OEM roofing part” to chase. What matters is matching the paver profile and the flashing and sealant system to what’s already installed. We are an independent service provider and are not affiliated with Cambridge Pavers; we source what fits your actual assembly.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambridge Pavers Roofing Is Failing

  • Water staining on the ceiling below a roof deck or parapet. This usually means the flashing where the paver detail meets the roof has opened up, and water is getting behind it. North Texas heat cycling widens those gaps season by season.
  • Loose or rocking coping and cap stones. When the mortar or adhesive joint under a paver cap fails, the stone lifts and lets water sit underneath. A stone you can wiggle by hand is already a leak waiting on the next storm.
  • Cracked or missing sealant at joints. Sealant is the shortest-lived part of any paver-to-roof detail in Arlington’s climate, where summer surface temperatures routinely push past 140°F and winter freezes contract the joint. Even the best sealant is a maintenance item, not a lifetime fix.
  • Granule loss or flaking debris on the pavement below. If you’re finding grit or flaked coating where a paver edge meets the roof, the protective surface above it is aging out. That’s a sign the assembly is closer to replacement than repair.
  • Soft spots or sagging at the roof edge. This points to moisture that has already reached the decking under the paver detail. By the time a spot feels soft, the repair is no longer just a sealant job.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Arlington, a targeted repair to a failed Cambridge Paver roof detail runs $400 – $1,800 and covers removing the failed stone or flashing, replacing the underlayment if it’s compromised, re-setting the paver detail, and re-flashing and sealing the joint. A full roof replacement when the failure has spread runs $8,000 – $20,000. What drives the range is how much of the assembly is affected, whether the decking underneath is sound, the pitch and access, and how many paver details tie into the roof.

Every estimate is written line-item: parts, labor, and any change order before we touch a thing, because an allowance that isn’t on paper is a surprise waiting for a date. Permits get pulled and inspections signed on any eligible job. The work is backed by our 90-Day Done Right Promise, and there’s no trip charge inside the county.

DIY or Call Us?

Roof work at height is where DIY goes wrong fastest, and an Arlington summer roof surface can hit temperatures hot enough to cause serious burns on contact. What you can safely do from the ground: look for ceiling stains, check for loose cap stones you can see from a ladder at the eaves, and note where debris is collecting. What you should not do is climb up to re-seal a flashing detail or re-set a stone on a pitched roof yourself; a fall from roof height is the real risk, and a bad seal job just moves the leak. If a repair involves getting up on the roof, call a trained professional. Call (888) 590-9867 and we’ll tell you honestly whether it’s a repair or a bigger job.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch