A Barrett company - serving Arlington, TX

Oldcastle Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Fence Installation: The Arlington Owner’s Guide

Fence installation using Oldcastle-compatible materials and systems for an Arlington property typically runs $3,500 to $9,000 installed, and the final number depends on linear footage, fence height, gate count and what sits under the ground. Most Arlington homeowners end up on this page the same way: a panel is leaning, a gate drags, or a post has started to move after the last round of heavy clay shrink-swell, and suddenly the fence is the thing they see out the kitchen window every morning.

Call (888) 590-9867

The symptom is usually small at first. One picket hangs loose. One post feels soft when you push it. Then a wind event out of the northwest rolls through and the whole picture changes. That is when the phone calls start, and it is exactly the kind of call we take most days in Arlington.

Which Oldcastle Models This Applies To

Oldcastle makes materials under several product lines, and the right match depends on which line your fence came from. Vinyl privacy systems, composite pickets, aluminum ornamental panels and the concrete and stone-look posts that anchor them all have different rail profiles, post caps and fastener sets. Before we quote anything, we look at the physical part.

Here is how to identify what you actually have:

  • Read the old label. Most Oldcastle panels and posts carry a manufacturer stamp or a stick-on tag near the bottom rail or inside the post cap. Photograph it before it fades further.
  • Measure rail height and thickness. A 5-inch rail and a 5.5-inch rail are not interchangeable, and the slot depth matters just as much as the width.
  • Match picket profile by shape, not by color. Color fades in Texas sun. Profile does not. Two fences that look identical from the street can still take different pickets.
  • Check post spacing. Center-to-center distance tells you which system the fence was built on, and that dictates which replacement parts will actually fit.

On the OEM-versus-aftermarket question: for Oldcastle specifically, OEM is the safer bet when the fence is under 10 years old and the profile is still in production. Once a line has been discontinued, a quality aftermarket equivalent in the same dimension is usually the better call, and we will tell you plainly which one we would install on our own fence. Barrett & Sons Construction Arlington is an independent service provider, not affiliated with Oldcastle, so there is no pressure to push one path over the other.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Fence Installation Is Failing

Texas weather punishes fences in ways that northern installs never see. Between 100-degree summer stretches, DFW clay soils that expand and contract with moisture, and spring storms that push gusts past 60 mph, an Oldcastle system that held up in a milder climate will show failure sooner here. These are the symptoms we find on Arlington properties, along with what is actually causing each one.

  • Leaning posts, especially after a wet spring. The post has heaved or settled in clay soil, which means the concrete footing is undersized or the hole was never deep enough for the local soil conditions.
  • Soft or rotted wood inside a vinyl or composite post sleeve. Water got in through a failed cap or a missing fastener and never drained out. A 3-foot section of rot can feel like a strong post until you press on it.
  • Loose pickets that swing when you push them. Top and bottom rail fasteners have backed out or snapped, usually from thermal expansion and contraction over many seasons. One or two loose pickets is cosmetic. A whole bay is structural.
  • Rails that pop out of the post during wind. That means the rail-to-post connection has worn, and the fix depends on whether your system uses a routed slot, a bracket or a captured insert.
  • A gate that drags or will not latch. Hinges sag, but so do posts, and a sagging gate is often the first signal that the post footing is failing. A gate that will not latch is a security issue in Arlington, not just a nuisance.

Replacement Cost & What’s Included

Full Oldcastle-compatible fence installation in Arlington runs $3,500 to $9,000 installed. That range covers typical residential privacy fencing and is driven by four things: linear footage, fence height (a 6-foot build costs more than a 4-foot build in both material and labor), gate count, and site conditions. A fence over solid ground on a flat lot sits at the lower end. A fence on a slope with rocky soil, old footings to pull, or a lot line that needs survey verification sits higher.

What the range includes:

  • Parts sourced and verified against your existing Oldcastle system
  • Post holes dug to proper depth, concrete-set, and given time to cure
  • Rails, pickets, caps and gate hardware installed by our own crew members
  • Haul-away of old fence material
  • Cleanup and final walkthrough

Every line is quoted in writing before we start. If we find something the quote did not cover (bad footings, buried concrete, an unmarked utility line), you get a written change order before any work continues. Every completed install is backed by our written 90-Day Done Right Promise. Permits are pulled and inspections signed on every eligible job, because the last contractor most Arlington folks used told them permits were optional and that conversation never ends well.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

What you can safely do yourself is worth doing. Walk the fence line after a rain. Push each post. Photograph old labels. Measure the rails and write down the numbers. If one picket is loose and the rail underneath is solid, tightening or replacing a fastener is fine. That is real work, and it saves us a trip.

Where DIY goes wrong on a fence install is at the post. Old fence footings have to come out cleanly, new ones have to be dug to the right depth for Arlington’s clay, and the concrete has to cure before rails go up. Skip that on a humid July day and the new fence leans in two years. A fence that goes up crooked also violates HOA rules in many Arlington subdivisions, and redoing it costs more than having done it right the first time. There is no high-tension component here, but a post that is not set properly becomes a falling hazard during the next storm.

If the honest answer is that this is bigger than one picket, call (888) 590-9867. Estimates are free, and a live person answers the phone day or night.

FAQs

Talk to Us About Your Arlington Fence

If the fence around your Arlington home is leaning, sagging or just past its years, call (888) 590-9867 for a free estimate. You will get a written quote with parts and labor broken out, a hard look at what the old footings are doing, and a straight answer on whether you need a repair or an install. Barrett & Sons Construction Arlington has been owner-operated since 1998, Tom Barrett answers his own phone, and every price change arrives in writing before a single nail moves. Ask anyone on your street, or look up the license yourself.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch