Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Driveway & Pavers: The Arlington Owner’s Guide
We install Quikrete-compatible driveways and paver systems across Arlington, and most full paver driveway installations here run $7,000 – $18,000; concrete driveway installations run $4,500 – $12,000. Quikrete is a materials brand (bagged concrete, sand, jointing and base products), so the “part” that fails is rarely the bag itself – it’s the base, the joint sand, or a panel of poured concrete. Owners usually figure this out the same way: a hairline crack in the driveway widens over one summer, a paver edge sinks after spring rain, or the joint sand washes out and the whole surface starts shifting. By the time it’s obvious, the fix is usually bigger than the symptom looks.
Which Quikrete Models This Applies To
Quikrete isn’t a single product line, and that matters when you’re trying to match a repair to what’s already on your ground. The bagged concrete mixes most Arlington driveways were poured with fall into a few families: high-early-strength (often called Fast-Setting or similar, labeled by cure time, not a model number), 5000 psi high-strength mixes, and standard 4000 psi mixes. Sand and paver base products are sold by volume and use, not by model. Joint sand is sold as polymeric or plain – and this is the compatibility gotcha people trip on. Polymeric joint sand doesn’t bond reliably to plain sand residue or to joints wider than about 1/2 inch; pour it into an oversize joint and it crumbles out by the next rain, not because the product is bad but because the joint was never right for it.
To identify what you’re dealing with, read the printed mix designation on the original pour records (if you have them) or have a small core sample tested for compressive strength. Old bags and labels fade, so photos of the original label help. On the OEM-vs-aftermarket question: Quikrete’s own line of joint sand, bonding agents and concrete mixes are the OEM equivalents here, and a quality aftermarket polymeric sand from a named manufacturer is a legitimate substitute for most repairs. What we won’t do is substitute a generic bag with no verifiable spec sheet for structural work – on an Arlington driveway, the mix strength is the whole ballgame. We’re an independent service provider and not affiliated with Quikrete; we simply install and repair using their materials and compatible equivalents.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Driveway & Pavers Is Failing
- Hairline cracks that spread over a season. Shrinkage cracks are normal in poured concrete, but once a crack widens past a credit-card thickness, water is getting under the slab and the base is moving.
- Joint sand washing out after rain. Plain sand in pavers migrates, and in Arlington’s clay-heavy soil the water has nowhere to drain fast, so joints empty and pavers loosen. Polymeric sand installed into the correct joint width holds.
- Pavers rocking or sinking at the edges. That’s almost always base failure, not the paver. A paver that moves means the compacted base underneath has lost compaction or was never deep enough.
- Efflorescence – the white chalky bloom. Moisture moving through the concrete carries salts to the surface. It’s cosmetic, but persistent bloom means water is getting in somewhere it shouldn’t.
- Spalling or surface flaking on the driveway pad. Freeze-thaw cycles in North Texas winters plus de-icing salts can flake the top layer. On a driveway older than 15 years, spalling often means the surface is done, not just dirty.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Arlington, here’s what repair and replacement actually run. Paver driveway installation is $7,000 – $18,000, concrete driveway installation is $4,500 – $12,000, asphalt paving is $3,500 – $9,000, driveway replacement is $5,000 – $14,000, and driveway sealing runs $250 – $700. A paver patio install is $3,500 – $11,000 if you’re extending the work.
| Job | Installed Range (Arlington) |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing | $250 – $700 |
What drives the range: driveway square footage, base depth (Arlington’s expansive clay soil often needs a deeper, better-compacted base than a coastal market), demolition and haul-off, drainage correction, and paver selection. Our quote breaks out materials, labor, and any allowance line-by-line, so you see the Quikrete materials cost separate from the crew time. Every price change arrives as a written change order before the work happens. If the base turns out worse than the first look suggested, you get the number in writing, not a surprise invoice at the end.
DIY or Call Us?
There are things you can safely check yourself. Walk the driveway and note where pavers rock or where joints have emptied. Look at the crack widths with a tape measure. Test drainage by running a hose and watching where water pools. Those observations are useful, and they’ll help the first conversation go faster.
Where DIY goes wrong on this work is the base. Resetting a paver without fixing the compacted base underneath just means it fails again in six months. Replacing a whole concrete panel isn’t a bag-level job either – mixing, placing, finishing and curing a Quikrete structural mix to spec takes the right tools and a feel most homeowners don’t have, and a bad pour in Arlington’s clay is expensive to undo. We’d rather tell you plainly: patching a small joint by hand is reasonable; re-pouring a slab or re-laying a driveway section is not a weekend job. Call (888) 590-9867 and we’ll give you an honest read before you commit to anything.
FAQs
A properly installed concrete driveway in Arlington typically lasts 20 – 30 years; a paver driveway can reach 30 – 50 years if the base and joint sand are maintained. The Texas heat and clay soil are the two factors that shorten that number, and a base that wasn’t compacted to spec will cut a driveway’s life in half regardless of the mix strength. Call (888) 590-9867 for an exact quote – estimates are free.
Often yes. Hairline cracks can be sealed, joint sand can be re-installed with polymeric sand, and isolated pavers can be reset if the base underneath is still solid. Structural cracks, widespread spalling, or base failure across a whole section usually mean replacement of that section, not a patch. Call (888) 590-9867 – we’ll tell you straight whether a repair makes sense.
A section repair typically runs one to three days including cure time; a full driveway replacement is usually three to seven days depending on square footage and weather. We don’t promise same-day driveway work – concrete has to cure, and rushing that is how driveways fail early. Call (888) 590-9867 to schedule your free estimate and get a real timeline.
We source Quikrete mixes, sand and joint products through local building supply dealers and pull the spec sheet for each product used on your job. You’ll see the brand and mix designation in the written scope, not a mystery bag off a truck. Call (888) 590-9867 for a quote – it’s free and it’s itemized.
A note on our scope: If your driveway work turns into a bigger project, we also install KraftMaid, Cambria, and Silestone for interior work – same written-scope approach. Every eligible job gets permits pulled and inspections signed, and every completed job is backed by our written 90-Day Done Right Promise. Our technicians have up to 28 years of experience, and a live person answers the phone around the clock.
Call (888) 590-9867 to schedule your free estimate. Ask about the senior and veteran discount, and the free second opinion if you already have a written estimate in hand. We’ll look at it beside you and tell you what we’d do.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.