Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Fence Installation: The Arlington Owner’s Guide
Fence installation with Quikrete in Arlington typically runs $3,500 to $9,000 for a standard residential yard, and we schedule most installs within a week of the free estimate. Quikrete matters here because it’s the concrete that sets your posts, and when that set fails, the fence tells you before you see the ground move. Owners usually notice it the same way: a gate that won’t latch, then a post that wobbles when the dog leans on it. In Arlington, our clay soil and the July dry-out do most of the damage. When a post hole gets dug and the mix doesn’t go deep enough or gets rushed, the first hard summer pulls that post loose.
Here’s the thing to understand up front: Quikrete is a concrete brand, not a fence brand. There is no “Quikrete fence model” to look up. What you’re actually pricing is fence installation where Quikrete Fast-Setting, High-Strength, or Post-Setting mix is used properly to anchor the posts. Barrett & Sons Construction Arlington is an independent installer and not affiliated with Quikrete.
Which Quikrete Products This Applies To
Three Quikrete concrete mixes show up on fence jobs in Arlington, and picking the right one changes how the post holds up over ten summers. Quikrete Fast-Setting Concrete Mix (the red bag) sets in about 20 to 40 minutes and is the common choice for a fast, one-day post set. Quikrete High-Strength Concrete Mix cures slower and reaches a higher final strength, which matters for a tall privacy fence or a gate post taking daily swing load. Quikrete Post-Setting Mix is formulated for ground contact and works well in our clay.
Identifying the right product is mostly reading the bag and matching it to the job, not hunting a serial number. What you can check yourself: the bag label, the mix type, and the reported yield on the bag (usually in cubic feet). A post hole 8 to 10 inches across and 24 to 30 inches deep is the standard target for a 4×4 post in most North Texas fence builds, and each hole takes roughly half to one 50-pound bag depending on width and depth. The compatibility gotcha: mixing Fast-Setting in a hole that’s already got standing water from a rain event weakens the set and can leave you with a soft post base by fall. If a contractor can’t tell you which Quikrete mix they use and why, that’s a fair question to ask before work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Fence Installation Is Failing
A post anchor is a buried concrete lock, and when it fails, the fence shows it before you see the concrete. Here’s what owners in Arlington call us about:
- A wobbly post you can rock by hand. The concrete broke free of the clay, usually from shallow depth or poor compaction during the original set.
- A gate that hangs low or drags. One or both gate posts lost grip, and the whole frame shifted a half inch or more.
- Visible cracks or a hollow sound in the concrete at the post base. Fast-set mix that dried too quickly, or a mix that wasn’t worked to the bottom of the hole.
- Posts sitting in a ring of separated soil or a visible gap. Water and clay keep moving, and the concrete no longer pins the post.
- Sagging or leaning fence line after summer. Cracked Arlington clay pulls away from a post set with the wrong mix or no proper hole prep.
Any one of those is worth a look. Two together with a leaning gate post almost always means the original set needs to come out and be redone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation in Arlington with a properly set Quikrete anchor runs $3,500 to $9,000, and the range moves on linear feet, fence material, and how many old posts have to be pulled and re-set. What drives the top of that range: a long privacy run, premium cedar or composite panels, a double gate, or re-setting a dozen failed posts instead of starting clean. We separate the parts from the labor in the written estimate so you can see what the Quikrete bags, posts, and panels actually cost versus the crew hours. Scope, allowance, and any price change come in writing before work moves. Every eligible fence job gets permits pulled and inspections signed, and the work is backed by our 90-Day Done Right Promise. Estimates are free.
DIY or Call Us?
Fence post setting with Quikrete is not spring-tension or electrical work, so it’s not a call-an-expert-immediately job the way a garage door spring is. You can safely check: whether a post rocks, the depth and width of the original hole, and whether the concrete at the base is cracked or hollow. Where DIY goes wrong is the hole prep. Rushing the depth, setting in wet clay without working the mix down, or using the wrong Quikrete product for a gate post are the reasons we re-do jobs. Pulling an old, fully set concrete anchor out of Arlington clay is heavy work that can wreck a post and a back. If a couple of posts are loose and the fence is otherwise sound, we’ll tell you straight when a repair makes more sense than a full install. Call (888) 590-9867 and get a look before you dig.
FAQs
A post set with the right Quikrete mix at the right depth commonly holds 15 to 20 years or more, but our clay and the summer dry-out shorten that when the set was rushed. Depth and mix choice matter more than the wood. Call (888) 590-9867 and we’ll look at what you have before it gets worse.
Usually yes, if the panels and rails are still sound and only a few posts lost their anchor. We pull the loose post, clean out the hole, re-set with the correct mix, and reattach the run. Call (888) 590-9867 for an honest read on repair versus replace.
A repair on one or two posts is typically a half-day to a day; a full new fence install in Arlington runs one to three days depending on linear feet and material. We give you the schedule in writing. Call (888) 590-9867 for a free estimate and a realistic window.
We buy the Quikrete mix and fence materials per job from suppliers we’ve used for years, and the estimate shows what’s being used. We don’t stock parts or carry a truck of inventory, and we’re not affiliated with Quikrete. Call (888) 590-9867 and we’ll walk you through the materials for your yard.
If you’re calling after a hard rain and a fence line feels different than it did last spring, that’s worth a look. Barrett & Sons Construction Arlington is owner-operated, every eligible job gets permits pulled and inspections signed, and we answer the phone live 24/7. Ask about our Free Second Opinion on Any Written Estimate, $40 Off Any Repair Over $200, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount. Beyond fences, we also work with KraftMaid, Cambria, and Silestone on interior projects. Call (888) 590-9867 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.