Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Bathroom Remodeling: The Arlington Owner’s Guide
Bathroom remodeling with Sakrete materials in Arlington typically runs $9,000 to $28,000 installed, depending on how far the project goes – a shower pan and floor pour is at the low end, a full gut with new tile, vanity, and fixtures sits near the top. Sakrete isn’t a fixture brand you swap out like a faucet; it’s the mortar, thinset, and concrete patch that hold the whole bathroom together, so the “part” that fails is almost always the bed under your floor tile, the mortar behind a shower wall, or a patch that cracked because the slab beneath it moved. Homeowners in Arlington usually find out the hard way: a hollow thud under a loose tile near the toilet, a grout line that keeps coming back no matter how many times it gets sealed, or a shower pan that flexes when you step in.
Which Sakrete Products This Applies To
Sakrete makes a wide range of bagged concrete and mortar products, and the right one depends entirely on the job. For bathroom work, the ones that come up most are Sand Mix and Topping Mix for shower pan beds and floor patches, Mortar Mix for setting tile and bedding fixtures, and Fast-Setting Concrete for small slab repairs where a cast iron drain needs a quick surround. Each bag is labeled with its mix type, coverage, and set time – read the bag before you buy, because Topping Mix and Sand Mix look identical on the shelf but behave differently under a shower pan.
Matching the product to your job is the whole ballgame in Arlington. A 60-lb bag of Sand Mix covers roughly half a square foot at 1 inch, so a 36×36 shower pan bed eats several bags – too many homeowners underbuy and end up with a cold joint in the middle of the pan. Original equipment isn’t really the question here; Sakrete is the brand, and the “aftermarket” equivalent is another bagged mortar brand of the same spec. What matters is spec match: compressive strength, set time, and whether it’s rated for wet areas. We source Sakrete by the job and won’t substitute a no-name bag to save a few dollars, because a $12 savings on mortar isn’t worth a $3,000 shower redo.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Bathroom Remodeling Is Failing
- Hollow sound under floor tile. The thinset or mortar bed has debonded from the substrate, usually because the slab wasn’t prepped or cured right before the pour.
- Grout that cracks along the same line. Movement in the mortar bed telegraphs straight up through the grout. Re-grouting without fixing the bed just buys you a few months.
- Shower pan that flexes or feels spongy. The pan bed wasn’t packed or sloped correctly, and water is working its way under it. This one gets worse fast.
- Loose or rocking toilet. A failed flange patch or an improperly bedded closet flange lets the toilet shift, and that’s a leak waiting to happen.
- Efflorescence or white chalky stains. Moisture is migrating through the mortar and evaporating on the surface. In Arlington’s clay-heavy soils and seasonal movement, this shows up more than most homeowners expect.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed bathroom remodeling in Arlington runs $9,000 to $28,000 for a full project, with smaller scopes priced separately. What drives the range is simple: the size of the bathroom, whether the shower pan or tub surround needs to come out, tile choice, and whether the subfloor or slab needs repair underneath.
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
Our quotes break parts and labor out line by line, so you see exactly what the Sakrete materials cost and what the labor costs. Every scope change gets a written change order before anyone picks up a trowel. And every job we finish is backed by the 90-Day Done Right Promise, in writing on the contract – if something isn’t right, one call brings us back.
DIY or Call Us?
Here’s the honest split. You can absolutely swap a faucet, caulk a tub surround, or pull a loose tile to see what’s under it. What you shouldn’t do yourself is a shower pan bed or a floor patch over a failed slab. Packing a sloped pan bed correctly takes practice, and a pan that’s off by even a quarter inch holds water against the wall framing until the wood rots – by the time you see the stain, you’re in for a lot more than a pan. Floor patch work over a slab that’s moving in Arlington’s clay soils follows the same rule: the pour is easy, reading the substrate is the hard part. If you’ve got a hollow tile, a flexing floor, or a patched area that’s already cracked again, that’s the point to call us at (888) 590-9867. We’ll give you a straight answer and a free estimate, and if it’s something you can safely handle, we’ll tell you that too.
FAQs
A properly installed Sakrete shower pan bed or floor patch typically lasts 15 to 25 years, but “properly installed” is doing a lot of work in that sentence. In Arlington, our clay soils shift with the wet-dry cycle, and a floor patch that wasn’t bonded correctly or given room to move will start cracking within a few seasons. Getting the prep right up front is what buys you the decades.
Sometimes, but rarely the way homeowners hope. A single hollow tile can be pulled and reset. A pan bed or a floor where the failure has spread is a tear-out, because you can’t pour fresh material over a bed that’s already moving and expect it to hold. We’ll tell you honestly which situation you’re in after we look at it. Call (888) 590-9867 for a free estimate.
A single floor patch or tile reset is usually a one-day job. A shower pan rebuild takes three to five days because the mortar has to cure before tile goes down and the tile has to cure before grout. A full bathroom remodel is two to four weeks depending on scope and inspection timing. Every schedule we give you is written down, with the inspection dates included.
We buy Sakrete from local suppliers per job, matched to the exact spec your project needs – no substituting a lesser bag to shave cost. We don’t stock parts on a truck or hold inventory; each job gets its materials sourced fresh and listed on your written estimate. We also install KraftMaid vanities, Cambria and Silestone tops when your bathroom project calls for them.
If you’ve got a bathroom problem in Arlington and you’re tired of guessing, give us a call at (888) 590-9867. A live person answers 24/7, the estimate is free, and you’ll get it in writing before any work starts. Barrett & Sons Construction is an independent contractor and is not affiliated with Sakrete.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.