A Barrett company - serving Arlington, TX

Cover Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cover Driveway & Pavers: The Arlington Owner’s Guide

Cover driveway and paver work in Arlington runs roughly $7,000 – $18,000 for a paver driveway and $3,500 – $11,000 for a paver patio, installed, and most jobs are scheduled within the same week, not the same day. The product lines themselves are sold through hardscape suppliers, so when a section heaves or a joint opens up, what you’re really pricing is the removal and re-lay, not the brick. Homeowners here usually spot the failure the same way: a lip at the garage apron they catch with a tire in the rain, sand washing out of the joints after a storm, or a dip in the walkway that holds water for two days. Barrett & Sons Construction Arlington is an independent contractor and isn’t affiliated with Cover.

Call (888) 590-9867

Which Cover Models This Applies To

Cover is a brand name you’ll see on paver and hardscape product lines rather than on a house, so matching the part means matching the paver, not the model year of a machine. What matters is the profile: the nominal thickness (most driveways here use a 2 3/8-inch paver, patios often 1 5/8 or 2-inch), the face size, and the color family, because dye lots drift between production runs and a patch from a different run will read as a patch for years. Check the underside of a loose unit or the edge of the field where the sand has scoured out. Look for a stamped name or a lot code on the bottom face. Measure thickness at the edge with a tape, not in the middle where wear rounds it off.

New Cover stock is the cleanest route when the line is still current. When it’s discontinued, a quality aftermarket paver of the same thickness and a close color is a legitimate choice for a repair, but we tell you plainly which is which before you decide. Never mix thicknesses in a driveway field. That’s where the rut starts.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cover Driveway & Pavers Is Failing

  • Sand washing out of the joints after rain. The bedding layer under the pavers is losing fines, usually because water is running across the field instead of off it. Refilling the joints without fixing the drainage is a yearly chore that never ends.
  • Heaving or a lip at the garage apron. In Arlington, soil that stays wet through a wet spring can push a section up an inch or more. That lip catches tires, catches a mower blade, and eventually catches a foot.
  • Sunken areas that hold water. A dip usually means the base wasn’t compacted in lifts deep enough for the load. A driveway needs a heavier base than a patio, and a repurposed patio base will pump and settle under a truck.
  • Loose or rocking units. Individual pavers that rock are sitting on a void. Leave it and the edges chip, then the neighbors chip, and the repair area grows.
  • Efflorescence or white haze that keeps returning. Mineral salts migrating up through the paver. A one-time bloom is normal; a haze that comes back every season points to moisture trapped under the field.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what we quote in Arlington, installed, with the base work and compaction included rather than tacked on later:

Scope Installed range
Paver driveway installation $7,000 – $18,000
Driveway replacement $5,000 – $14,000
Paver patio installation $3,500 – $11,000
Driveway sealing $250 – $700
Concrete driveway installation $4,500 – $12,000

The range moves with square footage, how much base has to come out, whether a soldier course or border is involved, and whether drainage has to be corrected. We break the estimate into line items: removal, base, pavers, edge restraint, polymeric sand, and any drainage work. If the scope changes once the old field is up, you get a written change order before we lay another paver. Every completed job carries the written 90-Day Done Right Promise.

DIY or Call Us?

Pouring a small bag of polymeric sand into a joint or sweeping a repair area is fine to do yourself. Lifting a full driveway field is not, and here’s the honest reason: the base is the job. A paver surface is only as good as the compacted gravel under it, and getting that right takes a plate compactor, lifts measured in inches, and a slope that sheds water away from the slab. One under-compacted section and the whole field moves the first summer. Then there’s the weight. A pallet of pavers is around a ton, and moving it by hand across a yard is how backs get hurt.

If a section is rocking, if water is pooling, or if you’re seeing heave at the apron, that’s a base problem wearing a paver costume. Call us at (888) 590-9867 and we’ll look at it and tell you straight whether it’s a patch or a rebuild.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch