Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Home Additions & ADU: The Arlington Owner’s Guide
We build and finish home additions and ADUs from $45,000 to $130,000 installed in Arlington, with ADU construction running $90,000 to $220,000 depending on size and site work. This is planned construction, not emergency work, so we schedule it properly instead of promising it by Friday. Dvele homeowners usually call us after a different part of the story: a panel showing water stains, a section of subfloor going soft near a door, or a framing detail that no longer lines up because a previous builder called the permit optional.
Key Takeaways
- This is an independent guide from Barrett & Sons Construction Arlington. We are not affiliated with Dvele.
- Addition pricing runs $45,000 to $130,000 in Arlington. ADUs run $90,000 to $220,000.
- We pull permits and get inspections signed on every eligible job, because the inspector works for you.
- Every scope, allowance, and price change is a written change order before work starts.
Which Dvele Models This Applies To
Dvele builds modular homes, so the compatibility problem isn’t a serial number on a hinge. It’s the structure around the add-on. What matters is how the existing home was framed, sheathed, and roofed when it landed in Arlington, and how any new wall, roofline, and utility run tie back into it.
Before we quote anything, we read the original build documentation. Dvele packages the drawings and specifications with the home, and those documents tell us the wall assemblies, roof pitch, and load paths we’re tying into. Without them you’re guessing. We also take real measurements of the existing footprint and the attachment points. That’s the part most homeowners skip, and it’s the part that decides whether an addition sits flush or fights the original structure for the rest of its life.
The OEM-versus-aftermarket question looks different for additions than for a hinge or a latch. You aren’t ordering a replacement part from Dvele. You’re extending a home with materials that need to match what’s already there: matched sheathing, matched roofing, and footprints that line up with the original module design. We’d rather source field-verified materials from named brands than chase a proprietary panel that may take months. KraftMaid, Cambria, and Silestone are the kind of brands we work with on the interior finishes. If a Dvele-specific component is genuinely required, we tell you up front and put it in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Home Additions & ADU Is Failing
These aren’t the failures of a part. They’re the failures of the structure or the previous build, and they show up in predictable places:
- Water staining on interior walls or ceilings near the seam. Usually a flashing or roof tie-in detail that was never finished correctly where the add-on meets the original roofline. Arlington’s heavy spring rain finds those gaps fast.
- Soft or spongy subfloor near a door or exterior wall. Often moisture intrusion that was never addressed before finish work went down. If it’s soft now, it was probably wet first.
- Doors and windows that stick or won’t latch squared. Frequently a sign of movement in the structure, not the hardware. An addition that wasn’t tied into the original framing properly will show it at the openings.
- Cracks at the junction of new and old walls. Sometimes settling, sometimes a foundation or frame that wasn’t engineered to carry the new load. This one warrants a look before it gets worse.
- Uneven floors or a slope that wasn’t there before. Usually framing or foundation related. In Arlington’s clay soils, movement is common, and it hits old and new sections differently.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what jobs run in Arlington, installed. These ranges come from our own market pricing, not a national average table:
| Job | Installed Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range is site work, utility extensions, foundation type, finish level, and how much of the existing structure has to come apart. A garage conversion is cheaper because the shell and foundation already exist. A freestanding ADU is the most expensive because everything is new. Every scope and allowance arrives in writing before a single nail moves, and every price change is a written change order you sign. No surprise invoice at the end. The work is backed by our written 90-Day Done Right Promise: if it isn’t done right, Tom comes back, one call. Call (888) 590-9867 for a free estimate.
DIY or Call Us?
You can pull the Dvele build documentation and check it against what’s actually on your property. You can walk the perimeter and take photos of any crack, stain, or soft spot, and you can look up our license number yourself before you sign anything.
Where DIY goes wrong is structural. Tying a new addition into an existing modular frame, extending a roofline without a flashing detail that will hold through a North Texas storm season, or converting a garage without permits means the next owner inherits a problem you can’t see. We pull permits and get inspections signed on every eligible job. The permit inspector works for you, not for us. That’s the point. If something needs a structural engineer, we’ll tell you. Call (888) 590-9867 when you’re ready for a real conversation about scope and cost.
FAQs
A well-built addition or ADU on a properly engineered foundation will last as long as the original home, decades and beyond, as long as the tie-ins and waterproofing are done correctly. The failure point is almost never the materials. It’s the detail work at the seams, and that’s where a proper permit and inspection process catches problems early. Call (888) 590-9867 for an exact quote. Estimates are free.
Sometimes, yes. Minor settling cracks, flashing repairs, or a single soft floor section can often be fixed without tearing out an addition. Full structural movement or a foundation that wasn’t built to carry the load usually can’t be patched. We’ll look at it and tell you honestly which side you’re on. Call (888) 590-9867 to schedule a free estimate.
A garage conversion typically takes several weeks. A full addition runs into months, and a freestanding ADU takes the longest because of site work and utilities. We schedule it instead of rushing it, and the timeline is in writing before work starts. Call (888) 590-9867 for a scope-based timeline and free estimate.
We source from named, verifiable brands and put every material and allowance in writing before work begins. We work with brands like KraftMaid, Cambria, and Silestone on interior finishes, and we tell you when a Dvele-specific component is genuinely required. We don’t carry stock and we don’t promise parts on a truck. Call (888) 590-9867 for a materials list and free estimate.
If you’re looking at an addition, an ADU, or a garage conversion in Arlington and you want a contractor whose address and license number you can look up before you sign, call Barrett & Sons Construction Arlington at (888) 590-9867. A live person answers, day or night. Every eligible job gets permits pulled and inspections signed, every scope is in writing, and the work is backed by the 90-Day Done Right Promise. Estimates are free, and a second opinion on a written estimate you already have is free too. The Senior and Veteran 10% discount is always there for those who qualify.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.