A Barrett company - serving Arlington, TX

Mighty Buildings Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Fence Installation: The Arlington Owner’s Guide

We install Mighty Buildings-compatible fence systems across Arlington, and a typical installed fence runs $3,500 to $9,000 depending on length, material, and terrain. Fence work is planned work, so we don’t promise same-day: we schedule a free estimate, order the right panels and posts for your panelized home, and get it on the calendar. Owners usually call us after a storm has leaned a run of fence, after a gate has dragged across a slab for a season, or after a post footing has heaved and one section of a neat, straight line has gone lazy. That’s normal in North Texas. The bigger question is whether the fence that failed was ever spec’d for this climate and this home type in the first place.

Call (888) 590-9867

Which Mighty Buildings Models This Applies To

Mighty Buildings builds panelized and 3D-printed homes, and fence work on those properties isn’t the same as fence work on a 1950s brick ranch. The line we run into most in Arlington is the single-family accessory dwelling and small-footprint product, but the installation rules carry over: your fence line needs to respect the pad, the utility easements the city put on your plat, and the sealed exterior shell of the home itself. The first thing you should do is not measure. Find your construction documents. Look for the plot plan and the utility easement notes, because in Arlington, a fence built two feet into a drainage easement is a fence the city can make you move.

Identifying the right system is straightforward once you have the paperwork. The home itself carries the panel and model identification, and your stamped plot plan shows the property line, the setback, and any easement corridors. Match those against the fence run you want.

The OEM versus aftermarket call matters here. Mighty Buildings doesn’t farm out fence panels the way a national builder would send you to a single supply house. Fence materials are a local decision. That’s good news for you: you can choose a residential-grade western red cedar, a pressure-treated pine rated for ground contact, a vinyl product with a UV-stabilized capstock, or an aluminum or steel ornamental system, and none of those choices require the manufacturer’s blessing. If you’ve seen KraftMaid, Cambria, and Silestone in our kitchen work, you already know we like named materials. Same rule for your fence. Ask what brand of vinyl, what mill the cedar came from, what gauge the aluminum is. If a contractor can’t answer that, you’ve learned something.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Fence Installation Is Failing

  • Posts leaning after a hard rain. North Texas soil moves when it gets wet, and if the original post holes were under-set in depth or set in soil rather than in concrete below the frost-free line, the whole run will rack. A fence that’s lived through two Arlington summers and one soaking spring and is now leaning is telling you the footings are inadequate.
  • Boards warping or cupping within a season. Pine paneling that was installed wet and unsealed will cup as it dries. In a Texas summer, that happens fast. The cause is usually material grade, not installation error.
  • Gates dragging or not latching. A gate that swings into the ground is a gate hung on a post that moved, or hung on a single post with no diagonal brace. Gate sag is the most common failure we see in Arlington, and it’s almost always about bracing and footings.
  • Rust at rail-to-post fasteners. Coated fasteners fail from the cut end inward. If you see rust blush at the joints after a couple of seasons, the original installer used the wrong grade of fastener, and the fence will loosen before it rots.
  • Gaps at the base after a slope shift. Mighty Buildings sites in Arlington are frequently graded, and a fence built to a level string line over a sloped yard produces a gap that widens as soil settles. Proper stepping follows the grade.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed fence replacement in Arlington runs $3,500 to $9,000 for most residential runs. The low end of that is a standard privacy run in pressure-treated pine or a basic vinyl; the high end is a longer run, a premium vinyl or cedar, an ornamental aluminum system, or a property with difficult access or retaining issues.

What drives the range: linear footage, material grade, gate count and style, terrain (a flat run versus a stepped run over grade), removal and haul-off of the old fence, and whether any footings need to be re-poured.

Every quote is line-item. Fence panels and rails, posts and footings, gate hardware, fasteners, removal, haul-off. Labor is its own line. If we find a buried utility or an easement problem that changes the scope, that change arrives as a written change order before we touch anything, not as a surprise line on the final invoice. Every eligible job gets permits pulled and inspections signed, and every completed fence is backed by our written 90-Day Done Right Promise. If something isn’t right within 90 days, one call brings us back.

DIY or Call Us?

Some of this is safe to check yourself. Walk the line and push on each post. Look at the footings for cracking or lifting. Look at gate hardware and hinges. Take photos. Read your plot plan and understand where your property line sits relative to the easement.

What we don’t recommend is DIY fence installation on a Mighty Buildings property, and it isn’t because it’s dangerous. It’s because the risk is expensive and invisible until it bites you. Footings set too shallow will pass the eye test in October and fail in June. A fence placed two feet into a drainage easement looks fine until the city inspects after a storm. And a gate hung on a post without proper bracing will sag within weeks no matter how careful the hang looks on day one.

Barrett & Sons Construction Arlington is an independent contractor. We’re not affiliated with Mighty Buildings, and we don’t speak for them. But we do know how these homes sit on their lots, and we’ve seen the failures that come from treating a panelized home’s site plan like a standard subdivision lot. Call us at (888) 590-9867 for a free second opinion on any written estimate, or to schedule your own. No trip charge inside the county. 10% Senior & Veteran discount, always.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch