A Barrett company - serving Arlington, TX

Mighty Buildings Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Driveway & Pavers: The Arlington Owner’s Guide

If your Mighty Buildings driveway or paver surface is cracking, sinking, or losing its finish, we install Mighty Buildings-compatible driveway and paver systems in Arlington for $7,000 – $18,000 on a full paver driveway and $3,500 – $11,000 on a paver patio, with most work scheduled inside two to three weeks of an accepted written estimate. Owners usually spot the problem the same way: a hairline crack that spreads across a winter, pavers that rock or hold water after a storm, or polymeric sand washing out in sheets down the slope. North Texas clay and our freeze-thaw swings put real stress on any hardscape, and what looks like a cosmetic issue is often the base underneath telling you it’s time.

Call (888) 590-9867

Key Takeaways

  • Mighty Buildings-compatible driveway and paver work in Arlington runs $7,000 – $18,000 installed, depending on base prep and surface area.
  • We are an independent installation and repair contractor, not affiliated with Mighty Buildings.
  • The two failure drivers in Arlington are expansive clay soil and drainage that puts water against the slab edge.
  • Every eligible job gets permits pulled and inspections signed, plus our written 90-Day Done Right Promise.

Which Mighty Buildings Models This Applies To

Mighty Buildings hardscape and driveway packages don’t arrive as a single catalog part the way a window sash does. What you’re actually matching is the site assembly: paver profile, base depth, edge restraint, and bedding layer that sit under and around the Mighty Buildings structure. Before we quote anything, we measure the existing course, count the pattern, and check the base depth with a probe. That tells us whether we’re matching a standard interlocking profile or a piece that was cut to fit the panel edge.

The OEM-versus-aftermarket call for Mighty Buildings specifically comes down to the edge and transition pieces. The field pavers are almost always interchangeable with a quality commercial paver (we install Belgard and Techo-Bloc on these jobs), but the pieces that meet the structure or step are where the geometry gets tight. We would rather source a matched field paver and custom-cut the trim than force a mismatched OEM trim that sits proud and traps water.

Identifying your system is straightforward. Look for a manufacturer stamp on the paver face, photograph the edge where pavers meet the Mighty Buildings structure, and note the overall square footage. If there’s no stamp, we measure the paver length, width, and thickness to the millimeter and match the profile from there. Send us those photos and measurements and we can tell you what you’re working with before anyone comes out.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Driveway & Pavers Is Failing

Most Arlington owners call us after one of these five shows up. Each points to a slightly different cause, and mixing them up is how people spend money in the wrong place.

  • Hairline cracks that keep spreading. Cracking across pavers or the drive edge usually means the base wasn’t compacted deeply enough or the clay beneath has shifted. Oak and pecan roots are frequent co-conspirators in older Arlington neighborhoods.
  • Pavers that rock or feel spongy underfoot. That’s a bedding-sand failure or a washed-out base. Water is getting underneath and carrying the fines away.
  • Ponding after rain. Standing water along the drive or patio edge means the slope has flattened out or the drainage path changes direction. This is the single most common cause of premature failure we see.
  • Sand washing out of the joints. Polymeric sand that disappears in sheets points to a failing joint or a base that shifts with every freeze. Missing sand lets water straight into the bedding layer.
  • Sunken sections near the structure. Settlement right where the pavers meet the Mighty Buildings panel or foundation is the classic sign the transition edge wasn’t restrained properly.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Arlington, our installed paver driveway work runs $7,000 – $18,000, paver patio installation runs $3,500 – $11,000, and a full driveway replacement runs $5,000 – $14,000. Concrete driveway installation lands at $4,500 – $12,000, asphalt paving at $3,500 – $9,000, and sealing a driveway you plan to keep runs $250 – $700.

What drives the range is base prep, drainage correction, and square footage. A driveway that needs its base rebuilt and re-sloped costs more than one where we’re replacing the surface over a sound base. You see the parts cost and the labor cost as separate lines on the written estimate, not blended into one number, and any change to scope arrives as a written change order before work happens. No surprise invoice at the end. Every eligible job gets permits pulled and inspections signed, and the finished work is backed by our written 90-Day Done Right Promise: if it isn’t done right, one call brings us back.

DIY or Call Us?

There’s real work you can handle safely. Pull up a loose paver and look at what’s under it. Snap photos of any cracks and measure the slope with a level. Clear leaves and debris from drainage paths and sweep sand back into shallow joints. That inspection costs nothing and tells us a lot.

Where DIY goes sideways is base and drainage. Rebuilding a base to the right depth over Arlington’s expansive clay and re-sloping it so water leaves the property takes compaction equipment and an eye for grade that most homeowners don’t have, and a short-cut base will fail again in a couple of seasons. Skimping on the edge restraint is the other common miss: a paver that isn’t locked at the perimeter spreads over time no matter how good the surface looks. Call (888) 590-9867 for a free estimate, and we’ll tell you honestly whether a repair gets you through or a full replacement does.

FAQs

How long do Mighty Buildings driveway and pavers last in Arlington? A properly installed paver driveway with a deep, compacted base typically holds for 20 to 30 years here, while a base that wasn’t compacted enough or drains poorly can fail in five to ten under our clay and freeze-thaw cycles. The base, not the paver, determines the lifespan. Call (888) 590-9867 for an exact assessment – estimates are free.

Can it be repaired instead of replaced? Often yes. Localized issues like a few rocking pavers, washed-out joints, or one sunken section near the structure can be pulled, re-bedded, and re-sanded without tearing out the whole drive. Widespread cracking or ponding that runs across the full slope is where a full replacement usually costs less than repeated patches. Call (888) 590-9867 and we’ll tell you which one fits your situation.

How long does the swap take? A paver patio or a partial repair is typically one to three days on site, while a full paver driveway replacement runs three to six days depending on square footage and base prep. Weather and allowable hours affect the schedule. Call (888) 590-9867 to schedule your free estimate and get a firm timeline in writing.

How do you source the part? We match your paver profile by stamp or measurement and source from Belgard, Techo-Bloc, and other quality lines, then custom-cut any trim that meets the Mighty Buildings structure. You’ll see the material and its cost on the written estimate before work starts. We’re an independent contractor, not affiliated with Mighty Buildings, and we don’t claim stock on hand. Call (888) 590-9867 for an exact quote – estimates are free.

Barrett & Sons Construction Arlington has handled driveway and paver work across Arlington and the surrounding communities for over 29 years, founded in 1998 and owner-operated from day one. Tom Barrett’s name, address, and license number are published, so you can look them up before you sign anything, and every eligible job gets permits pulled and inspections signed with the 90-Day Done Right Promise on top. We also work with KraftMaid, Cambria, and Silestone on related home projects, and calls are answered by a live person 24 hours a day. Standing offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Call (888) 590-9867 to schedule your free estimate.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch