A Barrett company - serving Arlington, TX

Boxabl Windows & Doors in Arlington, TX

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boxabl Windows & Doors: The Arlington Owner’s Guide

We install Boxabl-compatible windows and doors in Arlington, and typical installed cost runs $800 – $25,000 depending on whether you’re replacing one unit window or refitting every opening on a Casita. Most Arlington owners find us after a leak shows up at the sill during a spring storm, or a slider stops latching because the frame has shifted. Barrett & Sons Construction Arlington is an independent service provider and not affiliated with Boxabl. Our technicians have up to 28 years of experience.

Call (888) 590-9867

Which Boxabl Models This Applies To

Boxabl ships the Casita in series revisions, and window and door schedules change between them. Before you order anything, pull the data plate on the unit and write down the series revision and build date. Then measure the rough opening, not the visible glass: width, height, and sill-to-head inside the frame. A 1/4-inch difference in rough opening will cost you a return shipment.

The OEM-versus-aftermarket decision matters more on a Boxabl than on a stick-built home. The OEM unit drops in with the factory flashing detail intact, which keeps the box’s envelope warranty story clean. Aftermarket equivalents in the same size can run 20 to 40 percent less and often beat OEM on glass performance, but you’re taking on flashing responsibility. For a rental Casita in Arlington, we usually steer owners toward aftermarket vinyl units with a proper pan flashing; for a unit you plan to keep for 20 years, OEM is the safer call on the two or three openings that take the west sun.

We source KraftMaid, Cambria, and Silestone for interior trim and surrounds when a window swap runs into a kitchen or bath refit; those are brands you can look up yourself.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boxabl Windows & Doors Is Failing

  • Water at the sill after a hard rain. Texas wind-driven rain works the bottom corners of the frame; failed sealant or a lifted pan flashing lets it in. If you see a damp sill within an hour of a storm, the flashing has let go.
  • A slider that drags or won’t latch. On a Casita, this usually means the frame has settled on one corner. The roller isn’t the problem; the opening is out of square.
  • Condensation between the panes. The sealed glass unit has failed. No amount of caulk fixes it; the window has to be replaced or reglazed.
  • Daylight around the frame. Visible light at the edges of a closed door means the weatherstripping has compressed flat, which is normal after several North Texas summers of 100-degree heat cycling.
  • Sticking or swelling after rain. If a door swells shut in wet weather and swings free once it dries, the unit is taking on water somewhere upstream of the door itself.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Arlington, a single Boxabl window replacement runs $450 – $1,200 installed, and a full refit of every opening lands between $4,500 – $15,000 depending on glass package and count. A box-compatible entry door with hardware runs $800 – $2,500; an impact-rated glass package pushes the ceiling toward $8,000 – $25,000. What drives the range: rough opening size, glass spec (tempered, low-E, impact), OEM versus aftermarket, and how much trim and exterior sealing the swap requires.

Every quote comes in writing, line by line, parts and labor split so you can see what the window costs and what the install costs. If the opening turns out to be out of square once we’re in, that’s a written change order before we touch anything. All work is backed by the 90-Day Done Right Promise.

DIY or Call Us?

You can safely check things that don’t involve cutting into the envelope: measure the opening, snap photos of the data plate, test a latch, run a hose at the frame to see where water enters. That’s diagnostic work and it helps us quote accurately.

Where DIY goes wrong is at the flashing and the rough opening. A homeowner swapping a Boxabl window without pan flashing or proper backer will get three or four good years before Arlington’s spring storms find the seam. We’ve re-done that job more than once. Call (888) 590-9867 and we’ll tell you honestly whether your opening needs a full swap or just fresh sealant and weatherstripping. Free estimates, live person on the line.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch