A Barrett company - serving Arlington, TX

Boxabl Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boxabl Driveway & Pavers: The Arlington Owner’s Guide

We install Boxabl-compatible driveway and paver packages in Arlington, typically in the $7,000 – $18,000 range for a paver driveway, with a $4,500 – $12,000 option for concrete and $250 – $700 for resealing existing pavement. Most Arlington owners figure out something is wrong the same way: a hairline crack across the apron turns into a rocked, uneven edge after a summer of blackland clay soil movement, or a paver section in front of the unit settles low enough that water pools against the Boxabl frame. That pooling is the real warning sign, because it puts water where the unit was never meant to sit.

Call (888) 590-9867

Which Boxabl Models This Applies To

Boxabl’s Casita line has been the consistent reference point for these units, and any driveway or paver work should start from the specific delivery and pad geometry of the unit you actually received, not a generic spec sheet. The simplest way to confirm fit is to measure the pad thickness, the apron length from the unit’s base to the public right-of-way, and the slope away from the foundation. Any labels or serial markings on the pad frame should be photographed before the crew touches anything, so the replacement matches what’s there.

On OEM versus aftermarket for Boxabl specifically: the factory pad is one part, and the driveway and paver surface you add around it is a separate scope that most Boxabl owners handle with a local hardscape install. You do not need a factory-shipped paver to do this correctly. What you do need is a base prepared for Arlington’s clay-heavy soil, which shrinks and swells through the year and is the reason poor base prep fails here faster than in sandy soil markets. We’re an independent service provider and not affiliated with Boxabl, so we work to the measurements and specifications you have. We also service KraftMaid, Cambria, and Silestone work if your project runs into a kitchen or bath renovation at the same time.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boxabl Driveway & Pavers Is Failing

  • Water pooling against the base after rain. The pad has settled or the slope ran the wrong way at install. In Arlington, a low spot against the unit shows up within the first wet season.
  • Cracks spreading across the apron or main slab. Usually clay soil expansion working under a thin base. Left alone, cracks open into loose paver or cracked concrete edges within a couple of seasons.
  • Paver joints washing out. The sand or polymeric joint material has failed, so pavers rock and edge pieces loosen. This is common where an installer used too little base depth.
  • Sinking at the unit’s entry point. The transition between pad and driveway has dropped. That creates a trip edge and funnels runoff toward the frame.
  • Weeds and grass pushing through seams. A joint has opened wide enough to hold soil and seed. It signals base movement, not just a cosmetic gap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Arlington, with labor included:

  • Paver driveway installation: $7,000 – $18,000
  • Concrete driveway installation: $4,500 – $12,000
  • Asphalt driveway paving: $3,500 – $9,000
  • Full driveway replacement: $5,000 – $14,000
  • Driveway sealing: $250 – $700

The range moves with the square footage, how much base has to be dug and rebuilt, and the paver brand. We install Belgard and Techo-Bloc pavers, which you can look up before you sign. Every scope and every price change arrives as a written change order before work happens, so there are no surprise invoices at the end. The finished hardscape carries our written 90-Day Done Right Promise, and permits are pulled where the City of Arlington requires them.

DIY or Call Us?

An owner can safely handle sealing, replacing joint sand, and pulling weeds. What goes wrong with DIY is the base. Rebuilding a settled pad means digging out clay, compacting a new aggregate base, and re-setting slope away from the unit. Get that wrong and the pavers fail within a season, and a poorly graded driveway sends water toward your foundation instead of away from it. This is not a dangerous job like spring or electrical work, but it is a physical one, and a full driveway is heavy lifting. We install with background-checked crew members on every visit, and Tom Barrett’s address and license number are published if you want to look them up before you commit. Call (888) 590-9867 for a free estimate.

FAQs

How long does a paver or concrete driveway last in Arlington? A properly based paver driveway lasts 25 to 30 years, while concrete typically runs 20 to 30 years before major cracking. The clay soil is the wild card, so base depth matters more in Arlington than in most markets.

Can it be repaired instead of replaced? Often yes. Localized sinking at the unit entry or a washed-out joint section can be lifted and re-set without a full replacement. We give you the repair-first picture in writing before we quote a full install, and the free second opinion on any written estimate applies.

How long does the swap take? Sealing and joint work takes a single day. A full paver driveway runs three to five days depending on square footage and how much base is rebuilt. We schedule the work and tell you the timeline up front.

How do we source the pavers? We source Belgard and Techo-Bloc through their published lines, matched to the color and pattern of what’s already on your pad. You can look up every product before the crew arrives. Call (888) 590-9867 for exact pricing, and estimates are free.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch