A Barrett company - serving Arlington, TX

Plant Prefab Bathroom Remodeling in Arlington, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Plant Prefab Bathroom Remodeling: The Arlington Owner’s Guide

We install Plant Prefab-compatible bathroom remodeling in Arlington, and a complete gut-to-finish bathroom project typically runs $9,000 – $28,000 installed. Most Arlington owners find out something is wrong during a slow drain, a soft spot around the toilet flange, or a shower pan that flexes underfoot. Plant Prefab builds modular and panelized homes, so the bathroom comes as a factory-built wet wall and floor cassette. When a valve, drain, or pan fails, the fix has to fit the plant’s factory dimensions, not a standard site-built rough-in.

Call (888) 590-9867

Every job we quote includes a written scope with line-item allowances, a free second opinion on any estimate you’ve already received, and a written 90-Day Done Right Promise on the completed work. We’re an independent service provider and not affiliated with Plant Prefab. Call (888) 590-9867 for a free estimate.

Key Takeaways

  • Installed Plant Prefab bathroom work in Arlington: $9,000 – $28,000, written scope before any work starts.
  • Factory bath modules use proprietary rough-in dimensions. Measure the cassette, not the finished tile, when matching parts.
  • Trinity clay soil and North Texas slab movement is the leading cause of cracked pans and flange failures in this market.
  • Shower valve and check-valve work is a licensed-plumber job. We don’t recommend DIY on the wet wall.

Which Plant Prefab Models This Applies To

Plant Prefab supplies panelized and modular systems rather than a single product line, so the right replacement part depends on which bath cassette your home received. Owners in Arlington typically have one of two layouts: a factory wet-wall module where the plumbing is pre-installed in a framed wall panel, or a full bathroom “pod” that arrives with the shower, toilet, and vanity framing already set. The simplest identification path is the data plate on the module itself. Look inside the vanity cabinet, behind the access panel under the sink, or on the inside face of the module wall for a label listing the cassette model, rough-in dimensions, and fabrication date. Photograph that label before you call anyone.

Then measure. Plant Prefab wet walls run to the millimeter, so a standard 60-inch tub-and-shower surround may not seat against the factory opening without a shim kit or a custom trim transition. For the OEM-vs-aftermarket decision, the honest answer is this: aftermarket valve cartridges, drain assemblies, and shower pans can match a factory bath cassette, but you have to verify tolerances first. We don’t stock or carry parts, and we don’t claim to. We measure the module, source the correct part, and install it under a written quote.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Plant Prefab Bathroom Remodeling Is Failing

  • Tile grout cracking along the floor cassette seam. The cassette has shifted slightly against the sub-floor, usually from Arlington’s clay-soil movement. Movement at a factory panel joint means the flexible sealant needs renewal before water gets behind it.
  • Slow or gurgling drain from the shower or tub. The factory drain assembly is catching hair and soap scum, or the trap has partially collapsed. Gurgling usually points to a venting issue in the wet wall, not just a clog.
  • Flexing or “spongy” shower pan underfoot. The pan’s mortar bed or foam base has degraded. This is the most common failure we see in Arlington, and it’s the one most likely to leak into the floor cassette below.
  • Toilet flange wobble or a water ring at the base. Slab movement and aging wax or rubber gaskets cause the flange seal to fail. A loose flange means water is moving under the tile, not just on top of it.
  • Shower valve dripping, or water that won’t hold temperature. The cartridge in a factory valve body has worn out. On Plant Prefab wet walls the cartridge is replaceable, but the valve body itself is set behind the tile, so confirm which part is failing before ordering.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed Plant Prefab bathroom remodeling in Arlington runs $9,000 – $28,000 depending on the scope. A small bathroom remodel lands in the lower band at $5,000 – $12,000. A walk-in shower installation runs $4,500 – $12,000, a tub-to-shower conversion $3,500 – $10,000, a shower replacement $3,000 – $8,500, and a vanity installation $800 – $3,000. What drives the range: whether we’re replacing a single failing component or rebuilding the cassette, whether tile is being matched or replaced, and whether the valve body or drain assembly needs to come out of the wet wall.

Scope Installed Price Range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

Parts and labor are itemized separately on the written quote, so you see what the cassette, valve, and fixture cost versus the install. Any change to scope comes in writing before work starts. All completed work is covered by the 90-Day Done Right Promise, and every eligible job gets permits pulled and inspections signed.

DIY or Call Us?

Some checks are safe. You can photograph the module label, measure the cassette opening, look under the vanity for the access panel, and confirm whether the valve or the cartridge is dripping by watching the shower head with the valve shut. What we don’t recommend is opening the wet wall. The factory valve body sits behind tile and a waterproofing layer, and if the cartridge is seized or the valve is a proprietary body, a DIY attempt can crack the housing or compromise the waterproofing. On a panelized Plant Prefab bath, tearing out that factory joint without resealing it correctly is how a $500 cartridge job becomes a $7,000 cassette repair. Any gas, electrical, or supply-line work behind the wall is a licensed-trade job. For anything beyond a visual check, call (888) 590-9867.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch