A Barrett company - serving Arlington, TX

James Hardie Kitchen Remodeling in Arlington, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Kitchen Remodeling: The Arlington Owner’s Guide

James Hardie kitchen remodeling in Arlington runs $14,000 to $45,000 installed, and the fiber cement siding and trim work that most homeowners call about can usually be scheduled within days for smaller repairs or as part of a larger kitchen scope. Barrett & Sons Construction Arlington installs James Hardie-compatible exterior wall systems, trim, and panel assemblies around kitchen additions, bump-outs, and window openings. We’re an independent service provider, not affiliated with James Hardie.

Call (888) 590-9867

Owners usually discover a James Hardie product near the kitchen has failed the same way: a soft spot under a window, paint flaking in sheets off a trim board, or a hairline crack spreading across a panel after a wet spring followed by a 100-degree July. Arlington sits in a climate that punishes exterior fiber cement installed with the wrong clearances or the wrong fasteners, and that’s where most calls start.

Key Takeaways

  • Fiber cement from James Hardie is engineered for heat, humidity, and hail – most failures trace to installation, not the product.
  • Arlington panel and trim repairs typically run $800 to $2,500 per area; full exterior assemblies around a kitchen addition run higher.
  • We pull permits on eligible jobs and put every scope and price change in writing before work starts.
  • Reach a live person any hour at (888) 590-9867 for a free second opinion on any written estimate.

Which James Hardie Models This Applies To

James Hardie labels its fiber cement by product line, and knowing which line you have changes both the part match and the price. The main residential lines are HardiePlank lap siding, HardiePanel vertical siding, HardieShingle, and HardieTrim boards (including the grain-textured HardieTrim RusticSeries and the smooth HardieTrim Reveal lines). For kitchen work, the two products that come up most are HardiePanel and HardieTrim, because kitchen bump-outs, sunrooms, and additions punch new wall assemblies through existing exterior surfaces. The line and thickness are stamped on the back of every panel and printed on the end of each trim board – look there first. Thickness matters: HardiePanel comes in 5/16-inch and 7/16-inch, and the 5/16-inch product is rated for walls sheathed with structural panels while 7/16-inch can go straight to studs. If you’re matching an existing wall or replacing a section, the wrong thickness is the most common mismatch we see around Arlington. The OEM-versus-aftermarket call is real here, too. James Hardie brand trim and siding fit their own profiles exactly; generic fiber cement can save a little, but the profile, texture, and edge detail often won’t line up with your existing wall. We source genuine James Hardie parts for the work we do, and we write the exact product, thickness, and finish into the estimate before anything is ordered. If you’re matching cabinetry or finishes inside the kitchen, we also handle KraftMaid, Cambria, and Silestone, and those are, again, matched to the actual spec sheet, not to a guess.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Kitchen Remodeling Is Failing

  • Paint peeling in sheets: typically a moisture problem behind the panel or the wrong primer. Fiber cement needs a properly sealed face and back; if the back is unpainted and moisture gets in, the paint fails from underneath before the surface ever shows wear.
  • Hairline cracks running vertically or diagonally: usually movement at the framing or fasteners set too tight. HardiePlank wants fasteners set flush, not countersunk, and a crack tells you the fasteners or the framing are moving independently of the panel.
  • Soft or crumbly edges: almost always a clearance issue. Panels installed tight to soil, decks, or roof flashing wick water and the fiber cement absorbs it. James Hardie specifies clearances for a reason, and skipping them shows up two or three seasons later.
  • Trim boards pulling away from the wall: a fastener or substrate failure, not a trim failure. If the trim separates from the wall around a kitchen window, suspect the sheathing under it before you blame the trim.
  • Visible moisture staining or efflorescence: water getting behind the assembly. Arlington’s summer thunderstorms drive rain sideways into any gap; efflorescence on fiber cement near a kitchen addition usually means water is finding a path behind the panel.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what James Hardie-related replacement work typically runs in Arlington, installed, with labor and disposal included:

  • Trim board repair or replacement (per area): $800 – $2,500
  • HardiePlank or HardiePanel section replacement: $1,200 – $3,500 per area
  • Full kitchen bump-out exterior assembly: part of a $14,000 – $45,000 kitchen remodel
  • Cabinet and countertop components inside the remodel: $4,000 – $13,000 cabinets; $2,000 – $6,500 countertops

What drives the range: panel thickness, whether existing trim can be matched or all replaced, the moisture barrier behind the wall, and whether the assembly requires a permit. What’s included: parts, labor, disposal, and a written scope that lists the exact product, thickness, and finish before work begins. Every eligible job includes permits pulled and inspections signed. Every price change is a written change order before a nail moves. Every completed job carries the 90-Day Done Right Promise – if it’s not right, one call brings Tom back. If you have a written estimate from another contractor, we’ll give you a free second opinion on it.

DIY or Call Us?

An owner can safely check a few things: look at the back of a panel or the end of a trim board for the line and thickness stamp, note where the failure starts (edges, fasteners, seams), and photograph the moisture staining before anything is cleaned up. That information usually tells us what failed.

Where DIY goes wrong is the part most people skip. The real repair on fiber cement usually lives behind the visible board – the moisture barrier, the flashing around a kitchen window, the sheathing itself. Capping or caulking over a failure hides it for a season and then reappears worse. Working at height on an exterior wall also carries real fall risk, and that’s a job for trained hands. We’re not telling you this to scare you into calling; we’re telling you because we’ve seen what a caulk-and-forget fix looks like eighteen months later. For a straightforward look at what’s actually failing, call (888) 590-9867 – a live person answers any hour, and there’s no trip charge inside the county.

FAQs

How long does James Hardie fiber cement last in Arlington? James Hardie’s own product warranty runs up to 30 years on the siding lines, and properly installed material will likely outlast the wall assembly around it. In Arlington’s climate, the failure rarely comes from the product – it comes from installation, moisture behind the panel, and missing clearances. A properly installed assembly will hold up through years of heat, hail, and humidity.

Can the damaged section be repaired instead of replaced? Often, yes – small cracks and isolated trim failures can be repaired if the moisture barrier behind them is intact. If the water has reached the sheathing, a section replacement is the honest answer. We’ll tell you which it is after inspecting the wall, not before.

How long does a replacement take? A single trim board or panel section is typically a partial-day job once the material is on site. Larger assemblies around a kitchen addition stretch to several days. We give you a written timeline in the estimate, and if the scope changes, the change order arrives before work continues.

How do you source the replacement James Hardie part? We order genuine James Hardie material matched to the line, thickness, and finish stamped on your existing product. We don’t guess at color or profile from a photograph. If the exact profile isn’t available, we tell you that before ordering and show you the closest match.

Barrett & Sons Construction Arlington has been owner-operated since 1998, and Tom Barrett and his sons run the crews – not a call center. If you’d like a free estimate on a James Hardie repair or kitchen remodel in Arlington, call (888) 590-9867. Every eligible job gets permits pulled and inspections signed, every change order comes in writing before work happens, and the whole thing is backed by the 90-Day Done Right Promise. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch