A Barrett company - serving Arlington, TX

James Hardie Windows & Doors in Arlington, TX

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Windows & Doors: The Arlington Owner’s Guide

We install windows and doors built to pair with James Hardie siding and trim on Arlington homes, and the honest price picture is this: a one-window swap or single-door replacement typically runs $850 to $2,400 installed, while whole-house window replacement with James Hardie-compatible units in Arlington falls in our standard $4,500 to $15,000 range. Impact-rated units push higher, into the $8,000 to $25,000 band. Same-day isn’t a promise on an install, but we do answer the phone 24 hours a day and can usually get a written estimate to you within a couple of days of your call.

Call (888) 590-9867

Homeowners in Arlington usually find us one of two ways. Either the trim around a window has started to chalk and peel where it meets the James Hardie plank, or a door has begun sticking, dragging, or letting in a draft the family can feel across the room. Both are what a failing component looks like at the seams.

One thing to state plainly up front: Barrett & Sons Construction Arlington is an independent contractor. We’re not affiliated with James Hardie, we don’t claim to be, and we don’t carry parts on a truck. What we do is source the right window or door for your siding profile and install it so the envelope stays tight.

Which James Hardie Models This Applies To

James Hardie makes the siding and trim systems most of this work revolves around, and the window and door fit depends on which of those you have. Their HardiePlank lap siding, HardiePanel vertical panels, and HardieShingle lines all create different rough-opening depths, so the trim return and flashing detail changes from one to the next. A house clad in HardiePlank with 5-1/4-inch trim needs a different door surround than one in HardiePanel with a flush cladding detail.

To match the right part, read the stamps. James Hardie products carry a brand mark and a color-plus-texture identifier on the back face of each plank or panel, and that identifier tells you the profile. Measure the exposed face width of the trim, not the rough board, and measure the window frame opening at the interior stop. Those two numbers are what a supplier needs.

On the OEM-versus-aftermarket call: for the window or door unit itself, any quality unit from a named manufacturer that fits your rough opening and matches the siding detail is a sound choice. Andersen and Marvin are brands we install and stand behind. For the trim and flashing components that touch the James Hardie field, we keep to James Hardie-compatible trim so the finish warranty stays intact on the siding side. Mixing brands at the seam is where moisture gets in.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Windows & Doors Is Failing

Here’s what actually fails first on Arlington homes, and why:

  • Trim chalk and paint peeling at the window edge. Arlington’s summer sun and the swing between humid Gulf air and dry west Texas wind push paint to fail at the seam first. That seam is where caulk loses bond and water starts working behind the trim.
  • A door that sticks in summer and clears in winter. Wood-framed doors and jambs swell with humidity. Persistent sticking after two summers is usually a sign the frame has absorbed moisture or the hinges have pulled.
  • Drafts or condensation on the interior glass. Fog between panes means the sealed glass unit has lost its argon fill or the desiccant is saturated. That’s a failed unit, not a cleaning problem.
  • Water staining on the interior wall below a window. The flashing behind the trim has failed or was never lapped correctly. This is the one you don’t wait on.
  • Rot at the sill or the bottom corner of the door frame. Standing water pools at the sill, and once the wood softens, the window or door has lost its structural anchor.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what window and door work runs in Arlington, with the range broken out so you can see where the money goes:

Job Installed Range (Arlington)
Single window replacement $850 – $2,400
Window replacement, whole house $4,500 – $15,000
Impact window installation $8,000 – $25,000
Single entry door replacement $900 – $2,600

What drives the range: the number of units, whether the rough opening has to be reframed, the siding detail that has to be cut back and re-flashed, and the glass package. Impact glass and premium woods or composites sit at the top. Standard units in an existing opening sit at the bottom.

We give you a written line-item quote, parts and labor split out, so you can see exactly what the unit costs and what the install costs. If the scope changes once we’re into the wall, the price change arrives as a written change order before we touch it. Every install is backed by our written 90-Day Done Right Promise, and eligible jobs get permits pulled and inspections signed.

DIY or Call Us?

Some checks are fine to do yourself. You can look for fog between panes, run a hand along the interior trim for soft spots, feel for drafts on a windy day, and read the brand stamp on your siding to identify the profile. You can also check that the weep holes at the bottom of the window frame are clear.

Where DIY goes wrong: pulling a window or door out of a James Hardie-clad wall. The flashing and trim return around the opening is what keeps water out of the wall cavity, and re-lapping it wrong is how a small repair turns into a rot job. You’re also working at height, and a window unit is heavy and awkward. Getting the seal and the flashing right is a trained-hand job, and it’s the reason we pull permits on eligible replacements so an inspector signs off on the install.

If you’ve got a fogged pane or a door that won’t shut flush, call (888) 590-9867 and we’ll tell you straight whether it’s a repair or a replacement. A live person answers, day or night.

FAQs

How long do James Hardie-compatible windows and doors last in Arlington?
A quality window unit lasts 20 to 25 years in this climate, and a well-installed entry door 15 to 20. The Texas heat and humidity are hard on seals and wood, so the flashing and trim detail matters as much as the unit itself.

Can it be repaired instead of replaced?
Sometimes. A failed sealed glass unit can be re-glazed on a sound frame, and a sticking door can often be rehung or reframed. A rotted sill or a wall that’s taken on water usually means replacement. We’ll tell you which one you’re looking at.

How long does the swap take?
A single window or door is typically a half-day to a full day. Whole-house window replacement runs several days, depending on the count and whether the rough openings need work. Weather delays happen in Arlington, and we plan around them.

How do you source the part?
We measure the rough opening and the siding profile, then order the window or door unit from a named manufacturer matched to that opening. Trim and flashing come from James Hardie-compatible lines. We don’t keep parts on a truck, so lead time is real and we tell you what it is up front.

We also handle KraftMaid, Cambria, and Silestone work on the interiors side, so a window or door job can sit alongside other projects on the same home.

If you’ve got a window or door that’s already failed, or you just want a straight price before you decide, call (888) 590-9867 for a free estimate. We publish our name, our address, and our license number, and you’re welcome to look them up before you sign anything. We’ve been serving local communities for over 29 years, we pull permits, and our published standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch