A Barrett company - serving Arlington, TX

James Hardie Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Driveway & Pavers: The Arlington Owner’s Guide

We install James Hardie-grade driveway and paver systems across Arlington, and most full driveway projects land between $7,000 and $18,000 installed, with repair and section work quoted separately. We’re an independent contractor, not affiliated with James Hardie, so we match the right product to your slab, grade, and existing hardscape instead of pushing one line. Most owners figure something’s wrong when a paver edge starts lifting after a rain, a joint opens wider each summer, or the driveway drains toward the garage instead of the street. That’s usually the first sign the base or bedding failed, not the surface.

Call (888) 590-9867

Which James Hardie Models This Applies To

James Hardie is known mostly for fiber cement siding, trim, and exterior panels, and their hardscape line sits alongside those products rather than being a single “model number” the way a garage door opener is. What matters for matching is the product family and the profile spec, not a serial on a box. If you have a James Hardie paver or panel system already down, the identifying details are the paver dimensions (common hardscape units run roughly 4×8, 6×9, or 12×12 inches depending on the line), the surface texture, and the color lot stamped on the original packaging or palette tag if you kept it.

When we can’t read a tag, we measure a full paver and match thickness, which is usually 2 to 2.4 inches for a driveway-rated unit. Thinner patio pavers will crack under a truck, so getting thickness right is the compatibility gotcha most homeowners miss. For the OEM-versus-aftermarket decision: original James Hardie units give you an exact color and texture match, while quality aftermarket equivalents in the same dimensions cost less but can show a slight shade shift in direct Texas sun. We tell you which way makes sense for your project before anything is ordered. If your project also touches interiors, we carry KraftMaid, Cambria, and Silestone for those rooms.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Driveway & Pavers Is Failing

  • Pavers lifting or rocking at the edges. Water is getting under the base and washing out the bedding sand, which means the subgrade wasn’t compacted right or drainage runs toward the slab.
  • Widening joints and sand washing out. Polymeric sand is escaping through gaps that keep growing, a sign the pavers are shifting rather than locked in place.
  • Sunken or heaved sections after a hard freeze. North Texas clay expands and contracts with moisture, and a thin base can’t absorb that movement, so entire runs rise or drop.
  • Standing water near the garage or street. The slope has fallen out of tolerance, and ponding accelerates cracking and joint failure on any paver surface.
  • Cracks or chips in individual units. Traffic on an undersized base, or pavers too thin for a driveway, break first at the corners where load concentrates.

Replacement Cost & What’s Included

In Arlington, a full paver driveway installation runs $7,000 to $18,000, and that range moves based on square footage, base depth, and how much tear-out and hauling the old surface needs. A driveway replacement (any material) sits at $5,000 to $14,000, concrete driveway installation at $4,500 to $12,000, and asphalt paving at $3,500 to $9,000. Driveway sealing, if you’re maintaining a surface that’s still sound, is $250 to $700.

Every quote breaks parts and labor into line items, so you see what the pavers cost versus base prep, compaction, edge restraint, and polymeric sand. Every price change on the job arrives as a written change order before work moves, and every eligible job gets permits pulled and inspections signed. The work is backed by our written 90-Day Done Right Promise. For patios that pair with a driveway, paver patio installation runs $3,500 to $11,000.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely walk the driveway after a rain and mark where water pools, check whether joints are wider than a pencil, and photograph any rocking units. What you shouldn’t take on yourself is base prep and compaction. A paver driveway fails from the bottom up, and getting the subgrade, gravel base, and slope right takes plate compactors and laser levels most homeowners don’t own. Laying pavers on a bad base is the single most common costly mistake we see in Arlington. If a section is lifting or draining wrong, call us at (888) 590-9867 and we’ll give you a free written estimate before anything is ordered.

FAQs

How long does a James Hardie paver driveway last in Arlington? A properly installed paver driveway should hold up 25 to 30 years or more, but in North Texas clay the base decides that lifespan, not the paver. Poor compaction or bad drainage can cut it to a decade. Call (888) 590-9867 for a free estimate on getting the base right.

Can a failing driveway be repaired instead of replaced? Often yes, if the failure is isolated to one section or the joint sand, a targeted repair costs far less than a full replacement. If water is undermining the base across the whole run, repair is throwing money at a surface problem. We’ll tell you honestly which one you have.

How long does a paver section swap take? A single-section repair is usually a one- to two-day job, while a full driveway replacement typically runs three to five days depending on square footage and weather. We schedule around Texas rain and tell you up front if a storm will push the timeline.

How do you source the right James Hardie-compatible pavers? We measure your existing units, confirm thickness and color lot, and order the closest match from a verifiable supplier, giving you the product name and spec in writing. You can look it up yourself before we order. Call (888) 590-9867 to start with a free second opinion on any written estimate you already have.

Get Your Free Estimate

If your James Hardie driveway or paver surface in Arlington is lifting, draining wrong, or just worn out, call Barrett & Sons Construction Arlington at (888) 590-9867. A live person answers, we’ll walk the driveway with you, and you’ll get a written line-item estimate with no trip charge inside the county. Scope, allowances, and any change order come in writing, and every eligible job gets permits pulled and inspections signed. Ask about our senior and veteran discount, our $40 off any repair over $200, and the free second opinion on any written estimate you’re holding.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch