Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat a Paver Driveway Really Costs in Arlington, TX (and Why the Base Matters More Than the Pavers)
Paver driveway installation in Arlington runs $7,000 to $18,000 for most homes, and you can call (888) 590-9867 for a free estimate. But here’s the part that decides whether that number holds up in three years: how deep the aggregate base goes. Arlington sits on Blackland Prairie clay that swells and shrinks with the seasons, and a driveway built to a national 4-inch base spec will rock and heave long before the pavers themselves wear out. We quote base depth in writing, because that’s the line most estimates skip.
Why a Paver Driveway in Arlington Costs More to Build Right
A paver driveway that holds in Phoenix needs 4 inches of compacted base. The same driveway in Arlington, sitting on clay that can move 3 to 4 inches vertically in a wet fall after a dry summer, needs 6 to 8 inches of properly graded aggregate. Most quotes you’ll get won’t tell you which one you’re buying.
That gap is real money. The extra 2 to 4 inches of crushed stone and the compaction labor behind it are a material line item, not a rounding error. A quote that looks $2,000 cheaper than the next one is often just a thinner base. The pavers on top cost the same either way. The excavation, stone, geotextile fabric, and compaction are where the difference lives.
We also add a geotextile fabric layer between the clay and the stone. It keeps the clay from migrating up into the base as it gets wet and works. Without that barrier, the base slowly silts up, loses drainage, and starts moving. On a lot in central or east Arlington, where 1950s to 1970s brick ranches sit on clay that’s been there a long time, this matters more than on a newer lot in far north Arlington where the fill has already settled.
The Base Depth Premium, Line by Line
Here’s how the numbers land for a residential paver driveway in Arlington. These ranges reflect our published pricing for the Arlington market:
| Item | Typical Range |
|---|---|
| Paver driveway installation (6-8″ clay-spec base) | $7,000 - $18,000 |
| Geotextile fabric + extra aggregate for deep base | Built into the install quote |
| Driveway replacement (tear-out + new pavers) | $5,000 - $14,000 |
| Concrete driveway installation (for comparison) | $4,500 - $12,000 |
| Asphalt driveway paving (for comparison) | $3,500 - $9,000 |
| Driveway sealing (refresh on an existing paver drive) | $250 - $700 |
Concrete and asphalt come in lower on paper. They also crack along those same clay seams. If you want the deeper comparison, our page on Driveway & Pavers in Arlington walks through material choices for the local soil.
How Arlington’s Clay Actually Fails a Paver Driveway
The failure pattern is predictable once you’ve seen it a few times. Edge pavers tip first. You’ll notice the outside course along the garage apron or the street edge starting to rock underfoot. Then the field develops low spots, usually running in a line along the clay’s natural swell seams, not in random places.
That sequence matters. A driveway that’s failing at the edges is telling you the base and restraint weren’t built for the soil. A driveway that’s failing in the middle of the field is telling you the base is too thin or too wet. Either way, patching pavers on top of a bad base buys you a season.
Arlington’s storm cycle pushes this along. Spring hail and heavy rain events dump 2 to 3 inches in a single afternoon, then summer drought pulls the moisture back out. Concrete cracks most visibly after a dry summer and a wet fall on the expansive clay under most of this city. Pavers flex with that movement, which is one reason homeowners choose them. But flex only helps if the base can drain and re-compact. A shallow base turns that flexibility into rocking.
Drainage Design Is Not Optional Here
Arlington’s flat topography near the Trinity tributaries means water doesn’t leave a driveway quickly on its own. Slope and edge restraint are the two things that keep a paver driveway from turning into a detention pond after a big rain.
- Slope: we grade a minimum fall away from the garage and toward the street or a drainage point, so water sheets off instead of pooling in the field.
- Edge restraint: a properly set edge keeps the outside course from spreading under load and water. Most of the tipping we see on older drives started with weak edge restraint.
- Permeable options: on lots in south Arlington with tight drainage, we’ll talk through permeable pavers and a stone reservoir base as an alternative to a solid field.
The grading gets worked out before excavation. It’s part of the scope, in writing, not a decision made on the day.
Belgard and Techo-Bloc: Why the Brand Name on the Paver Matters
Belgard and Techo-Bloc both publish installation specs, and those specs include regional guidance for expansive soils. When the installer follows a documented spec, and the pavers carry a named brand, you have something to point to if a warranty question comes up. Mystery pavers off an unmarked truck give you nothing to reference.
Barrett & Sons Construction Arlington installs Belgard and Techo-Bloc hardscape products, and the sub-base spec we build to is written on your quote. Materials you can look up. Base depth you can check with a tape measure and a shovel after the excavation is done. That’s the whole point.
What Happens When the Dig Finds a Surprise
On a lot with an old driveway, excavation regularly turns up things nobody saw on the walk-through: buried debris, an old concrete pad under the pavers, a pocket of clay that’s moved deeper than expected. It happens in central Arlington more than people expect, given how long some of these driveways have been in the ground.
When it happens, you’ll see the cost in writing and approve it before a single paver is set. Every scope, every allowance, every price change arrives as a written change order first. An allowance that isn’t on paper is a surprise waiting for a date. If the base has to go deeper than quoted because the clay moved, you know what that costs and you decide whether to proceed.
Every eligible job also includes the permit pulled and the inspection signed. The permit inspector works for you, not for us. That’s the check that keeps a paver driveway inspection-ready instead of a project that gets finished and forgotten. To see how this fits into the bigger picture, our home page and the main Driveway & Pavers service page lay out the full process.
Common Arlington Scenarios We See
1950s-70s brick ranch, original concrete drive failing
These lots usually have a cracked concrete pad on shallow base. We tear out, evaluate the clay, and build the deeper base before pavers go down. Budget toward the middle of the $7,000-$18,000 range.
1990s-2000s subdivision, first paver driveway
Fill has had time to settle. We still spec the deep base, but the excavation is straightforward. Often lands toward the lower end of the range.
Storm-damaged drive with a hail repair already done
Arlington’s post-storm restoration surges can leave a driveway half-repaired. We assess what’s actually under the pavers before quoting the fix.
FAQs
A paver driveway in Arlington typically costs $7,000 to $18,000, with the exact price driven by driveway size and base depth. Because Blackland Prairie clay requires a 6-8 inch aggregate base rather than the national 4-inch standard, expect the base to account for a real share of the total. Call (888) 590-9867 for an exact quote – estimates are free.
It depends on what’s failing. If the pavers are sound but a few edge courses have tipped, a repair that resets the edge restraint and re-levels the base can cost far less than a full replacement. If the low spots run through the field, the base is the problem and patching the surface won’t hold. Call (888) 590-9867 and we’ll tell you honestly which one you’re looking at – the second opinion on any written estimate is free.
Yes. We answer the phone with a live person 24/7, not a voicemail box or an out-of-state call center, and we schedule estimates promptly inside the county with no trip charge. Call (888) 590-9867 to get on the schedule.
Because the soil moves. Blackland Prairie clay can swell 3-4 inches vertically between a dry summer and a wet fall, and a shallow base can’t absorb that movement without rocking. The deeper base plus geotextile fabric keeps the driveway stable through the swing. Call (888) 590-9867 if you want us to check what’s under your current drive.
Get a Written Paver Driveway Estimate for Your Arlington Home
If you’ve been quoted a paver driveway in Arlington and you want to know whether the base is built for the clay under your lot, call (888) 590-9867 for a free estimate. We put the base depth, the brands, and every allowance in writing before work starts, and the written 90-Day Done Right Promise backs the finished job. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington, TX.
What Our Customers Say
"Addition over the garage matched the original roofline and brickwork so closely that visitors do not realise it was added. He tracked down the closest brick he could find rather than settling."
- Gideon Stroud"Tom Barrett was on our job most days himself, not just at the quote and then never again. When something needed deciding there was an actual person to decide it with."
- Rosalie Pemberton"His sons run the crews and they were in our house for four months. Not once did I feel I had to be home to keep an eye on things."
- Camila Fuentes