Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose Kohler Construction
Barrett & Sons Construction Arlington provides independent Kohler construction service in Arlington, TX – we repair and install Kohler toilets, faucets, cast-iron tubs, and shower systems in homes across the city, and we’re not affiliated with, authorized by, or endorsed by Kohler. What makes our Kohler work different is that we match the actual model and finish code before we touch the trim, spec genuine Kohler OEM parts where fit and finish matter, and tell you straight when a cartridge swap beats a full remodel. We work on Kohler fixtures every week in North Texas homes, so the rough-in dimensions, valve bodies, and finish codes are familiar ground rather than catalog photos. If you’re pricing Kohler work, call (888) 590-9867 for a free estimate.
Why Trust Barrett & Sons Construction Arlington for Your Kohler Construction?
Kohler makes fixtures that reward a careful install and punish a sloppy one. A Memoirs one-piece toilet set on a flange that sits a quarter-inch off grade will rock, leak at the wax, and stain the bowl no matter how many fill valves you put in it. A Forté single-handle valve roughed in too far off the tile face will never let the escutcheon seat flush. Our crew members have worked on these fixtures long enough to recognize the difference between a failed part and a failed install, and that distinction is where most repeat repair bills come from.
We spec genuine Kohler OEM cartridges, fill valves, and exposed trim on the parts that show, and especially on anything carrying a finish warranty – a lifetime finish guarantee is only as good as the part it’s stamped on. On hidden internals where the savings are real, we’ll use quality aftermarket and tell you so in the written scope. Warranty-safe service means we don’t cut, drill, or modify a Kohler fixture in a way that voids the manufacturer’s coverage without putting that in writing first. Our technicians have up to 28 years of experience across these product lines, and every job that qualifies gets permits pulled and inspections signed. The permit inspector works for you, not for us – that’s why we like him.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Arlington
Arlington’s hard, mineral-heavy water and its older housing stock produce a specific set of Kohler failures. Here’s what we see most:
- Memoirs one-piece toilets with a failing fill valve or slow tank-to-bowl leak. The symptom is a bowl that stains and a water bill that creeps up. Usually the fill valve has scaled out, or the flush valve gasket has hardened – on the one-piece, the tank-to-bowl seal is integral, so a leak there is a different repair than on the two-piece Memoirs Stately.
- Forté and Purist single-handle faucets dripping at the ceramic cartridge seat. Years of hard water deposit minerals on the cartridge seat and it stops sealing clean. This is a cartridge replacement, not a faucet replacement, in almost every case we open up.
- Villager and Kathryn cast-iron tubs with chipped or worn enamel around the drain and overflow. The porcelain wears thin first at the drain fitting, exposes the iron, and rust follows. Caught early, this is a refinish. Left long enough and the iron pits through.
- Choreograph shower wall panels loosening at the adhesive seams or cracking at fastener points. When the panel lifts, water gets behind it and the substrate stays wet. The fix depends on how long it’s been leaking.
- Trim that won’t seat flush after a prior remodel. A rough-in set too far off the finished tile face is the hidden cause behind a surprising number of “Kohler faucet problems” in Arlington homes built or remodeled in the 1990s and 2000s.
Kohler Parts & Our Repair-vs-Replace Approach
We don’t claim to stock Kohler parts locally. What we do is match the exact part to the model and finish code before we order, so you’re not paying for a second trip because someone guessed. On exposed trim – a Purist spout, a Forté handle, a Memoirs trip lever – we spec genuine Kohler OEM, because aftermarket finish won’t match and a lifetime finish warranty won’t survive a knockoff part. On hidden internals like a fill valve or a supply line, quality aftermarket is often the honest call and the savings are real.
On cast-iron Villager and Kathryn tubs and on Kohler shower systems, refinishing or rebuilding is frequently smarter than replacement. But once a tub is cracked through the iron or a valve body is corroded out, replacement is the honest answer and we’ll say so. Scope in writing, allowances in writing, change orders in writing – before any work moves. Call (888) 590-9867 for a free estimate on your Kohler repair or remodel.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We pull the trim and identify the model and finish code, then test to find whether the failure is the part or the rough-in. A running Memoirs toilet gets its fill valve and flush valve checked separately before anyone quotes a repair.
- 2
Repair or install. We order the correct Kohler OEM part or spec an approved alternative, then replace the cartridge, valve, or fixture. On a remodel, the rough-in gets re-set to the correct dimension off the finished tile face before the new trim goes on.
- 3
Test. Every valve gets pressure-tested and every toilet gets a flush-and-fill cycle before we close up the wall or call the job done. A Choreograph panel gets checked for a watertight seal at the seams.
- 4
Warranty. Every completed job is backed by our written 90-Day Done Right Promise – if it’s not done right, one call brings us back. Kohler’s own warranty stays intact because we service to spec.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Arlington
We work on the Kohler lines that show up most in Arlington homes: Memoirs and Memoirs Stately toilets in both one-piece and two-piece; Forté and Purist faucet and shower trim; Villager and Kathryn cast-iron alcove tubs; and Choreograph and Levity shower wall and base systems. We also handle full bathroom remodeling, tub-to-shower conversions, and tile and fixture work around these products – so a Kohler shower system can go in as part of a larger remodel rather than a standalone swap. If you’re unsure which line you have, the model number is usually stamped inside the tank lid or on the valve body.
We Also Service These Brands
Barrett & Sons Construction Arlington is multi-brand by design, not single-brand dependent. Alongside Kohler we service KraftMaid cabinetry, Cambria and Silestone countertops, and Toto fixtures – premium brands you can look up, not mystery brands off a van. That range matters on a full bathroom or kitchen remodel, where the fixture, the cabinet, and the counter all have to line up. One crew, one written scope, one point of accountability.
FAQs – Kohler Construction Service in Arlington
Is Barrett & Sons Construction Arlington authorized by Kohler? No – we’re an independent Kohler service provider and are not authorized, sponsored, or endorsed by Kohler. That independence is deliberate: it means we can tell you honestly when a Kohler part should be repaired and when it should be replaced, without a manufacturer relationship steering the answer. Call (888) 590-9867 if you want a straight read on your fixture.
Do you use genuine Kohler/OEM parts? Yes, on exposed trim and anything with a lifetime finish warranty we spec genuine Kohler OEM cartridges, fill valves, and trim. On hidden internals we’ll sometimes use quality aftermarket where the savings are real, and that choice is written into the scope before work starts.
How long does Kohler service take? A cartridge or fill valve swap is typically a short service call; a tub-to-shower conversion or full bathroom remodel runs longer and depends on permit and inspection timing. We give you the schedule in writing before we start, not a phone estimate that changes at the door.
What Kohler models/series do you cover? Memoirs and Memoirs Stately toilets, Forté and Purist faucet and shower trim, Villager and Kathryn cast-iron tubs, and Choreograph and Levity shower systems, plus the tile and fixture work around them.
Will service void my Kohler warranty? Not when the work is done to spec with correct parts. We avoid modifications that void manufacturer coverage and put anything unusual in writing before we proceed. Ask us and we’ll walk you through it – call (888) 590-9867.
How much does Kohler construction cost in Arlington? It depends on the scope. Here are the ranges we work from in Arlington:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Tile & Fixtures (fixture replacement and tile reset) | $800 – $2,500 |
Call (888) 590-9867 for an exact quote – estimates are free, and you’ll get it in writing.
Book Your Kohler Service in Arlington, TX
Whether it’s a Memoirs toilet that won’t stop running or a full tub-to-shower conversion with a new Kohler system, Barrett & Sons Construction Arlington handles it with written scope, OEM parts where they matter, permits pulled on eligible jobs, and our 90-Day Done Right Promise on the back end. Call (888) 590-9867 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Arlington.