Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose Delta Construction
We provide independent Delta construction, repair, and installation service in Arlington, TX, and what sets our Delta work apart is simple: we know the exact cartridge numbers, finish codes, and trim compatibility for the specific Delta fixtures in your home, so the job is done right the first time. We are an independent local service provider, not affiliated with or authorized by Delta. If you have a Monitor valve that won’t hold temperature or a Lahara faucet dripping at the base, call (888) 590-9867 for a free estimate.
Delta fixtures show up in kitchens and baths all over Arlington – from 1950s brick ranches in central and east Arlington to 1990s subdivisions in the south and far north. We work with them every week.
Why Trust Barrett & Sons Construction Arlington for Your Delta Construction?
Delta products reward familiarity. A Monitor 13/14 Series valve has a pressure-balance cartridge with a specific seat and spring arrangement; a single-handle kitchen faucet has a ceramic cartridge with its own O-ring stack. Get the number wrong and the drip comes back in a month. Our crew members have up to 28 years of experience pulling Delta cartridges, matching trim kits, and reading finish codes, so we arrive knowing what your Arlington fixture likely needs before we open the cabinet underneath.
We specify genuine Delta OEM cartridges, seats, springs, and trim kits on repairs. Aftermarket cartridges often fit loosely and fail early, especially with the sediment and water pressure common in older Arlington homes. We also work warranty-safe: we don’t modify the valve body, we don’t swap trim across incompatible series, and we document what was replaced so your Delta coverage stays intact. Every eligible job gets permits pulled and inspections signed. Every price change arrives as a written change order before we touch the valve.
We’re owner-operated, and the name on the license is the name on the truck. You can look it up before you sign anything. If something’s wrong after we leave, the 90-Day Done Right Promise brings us back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in Arlington
- Monitor 13/14 Series cartridge wear. A handle that turns but won’t hold temperature, or water that goes cold mid-shower, usually traces to a worn pressure-balance cartridge. Arlington’s hard water accelerates the wear, and the fix is a genuine Delta replacement cartridge plus a valve-body flush.
- Single-handle kitchen faucet ceramic cartridge failure. The Classic and Foundations lines drip at the base and the handle loosens over time when the ceramic cartridge and O-rings wear out. Replacing the OEM cartridge and seat-and-spring kit usually solves it before you consider a new faucet.
- Finish pitting and peeling. Spot-resistant stainless and Venetian bronze Delta faucets can pit or peel after years of hard-water exposure. It’s cosmetic, not structural, and whether it justifies replacement depends on the age and finish of the surrounding fixtures.
- Diverter spout and shower trim wear. In older Arlington homes, water pressure and sediment chew through diverter spouts and shower trim faster. A spout that won’t divert or a trim ring that’s loose and leaking behind the wall needs prompt attention.
- H2Okinetic and In2ition shower head clogs. Mineral buildup in the spray channels of these heads cuts flow and sprays unevenly. Sometimes a deep soak and clean restores them; sometimes the head is past saving.
Delta Parts & Our Repair-vs-Replace Approach
We source parts per job. We don’t claim a local parts warehouse – when you call, we identify the exact cartridge or trim kit from your fixture’s model and finish code, then order genuine Delta OEM parts. For a Monitor valve cartridge or a kitchen faucet’s seat-and-spring kit, the OEM part is almost always the right call; aftermarket cartridges fit loosely and fail early under Arlington’s water conditions.
The honest question is when to stop repairing. If your Delta fixture is more than 15 to 20 years old and the valve body or finish is compromised, a string of partial repairs costs more than one clean replacement. We tell you that straight. A bathroom remodel runs $9,000 – $28,000 in Arlington, and a walk-in shower installation runs $4,500 – $12,000 – we’d rather give you that number than sell you a third cartridge on a valve that’s done.
Call (888) 590-9867 for a free estimate and a written line-item quote.
Our Delta Service Process – Step by Step
- 1
Diagnosis. We identify your Delta model and series, test for cartridge wear, check water pressure and sediment at the valve, and confirm the exact replacement part number before quoting.
- 2
Repair or install. Water off, cartridge pulled with the proper removal tool, valve body flushed, genuine Delta OEM cartridge and trim installed. On a vanity or shower install, tile and fixtures are set to the same standard.
- 3
Test. We run hot and cold through the full range, check for drips at the spout and base, verify the diverter and shower trim, and confirm no leaks behind the wall.
- 4
Warranty and documentation. You get the parts list and a written record of what was replaced. Every eligible job is backed by the 90-Day Done Right Promise – one call brings us back.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Arlington
We handle Delta Monitor 13/14 Series tub and shower valves, Lahara and Windemere faucet collections, Classic and Foundations kitchen faucets, and In2ition and H2Okinetic shower heads. On the remodel side, we install walk-in showers and shower surrounds, bathroom vanities, and tile and fixtures that pair cleanly with Delta trim. If you’re updating a bath in Arlington and want the valve, trim, and tile to line up without a second trip, that’s the work we do.
We Also Service These Brands
Delta is one part of what we handle. Barrett & Sons Construction Arlington also works with KraftMaid and Cambria in kitchens, Silestone countertops, and Kohler fixtures, alongside GAF and CertainTeed roofing and Andersen and Marvin windows. You’re not locked into one brand with us – we install what fits your home and your budget.
FAQs – Delta Construction Service in Arlington
Yes, that’s almost always a worn pressure-balance cartridge in the Monitor 13/14 Series valve. The standard fix is a genuine Delta replacement cartridge and new trim, with a valve-body flush to clear sediment. Call (888) 590-9867 and we’ll confirm the part before we come out.
Usually yes. A dripping Classic or Foundations faucet is typically a failed ceramic cartridge and worn O-rings, and an OEM cartridge plus a seat-and-spring kit solves it. We only recommend a full faucet replacement when the body or finish is compromised.
No. Finish pitting on spot-resistant stainless or Venetian bronze is cosmetic and doesn’t affect function or require replacing the shower or vanity top. If the finish is shot and the fixture is older, we’ll give you an honest replace option with real numbers.
In most cases yes, once we match the valve series and trim. We check your existing rough-in and tile layout before ordering so the trim sits flush and the tile work lines up. A walk-in shower installation in Arlington runs $4,500 – $12,000.
Here are the ranges we quote in Arlington:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Tile & Fixtures (per bath) | $9,000 – $28,000 |
Call (888) 590-9867 for an exact quote – estimates are free.
No, not when the work is done warranty-safe with genuine Delta parts and no valve-body modification. We document what we replace so your coverage stays intact, and we flag anything that could affect it before we start.
Book Your Delta Service in Arlington, TX
Whether it’s a Monitor valve that won’t hold temperature or a full bathroom vanity update, we’ll give you a free estimate and a written line-item quote. Calls are answered by a live person, 24/7. Reach Barrett & Sons Construction Arlington at (888) 590-9867 – no trip charge inside the county, and a free second opinion on any written estimate.
Written by the team at Barrett & Sons Construction Arlington.