A Barrett company - serving Arlington, TX
T

Therma-Tru Construction Service in Arlington, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Arlington Homeowners Choose Therma-Tru Construction

We provide independent Therma-Tru construction service in Arlington, and we’re not affiliated with or authorized by Therma-Tru. What sets our work apart is brand-specific know-how: our crews have installed and serviced Smooth-Star, Fiber-Classic, Pulse, and Benchmark units across Arlington, so we know the hinge, sill, and finish quirks each series develops in North Texas heat and spring storms. Every eligible job gets permits pulled and inspections signed, every price change arrives as a written change order before work starts, and every completed job is backed by our written 90-Day Done Right Promise. Call (888) 590-9867 and a live person answers, day or night.

Call (888) 590-9867

Arlington sits squarely in the DFW hail belt, and the Blackland Prairie clay under most of the city swells and shrinks with every wet and dry cycle. Doors feel that movement first. A Therma-Tru entry that sealed tight in March can stick by August and show daylight at the threshold by October. That pattern is the reason this page exists: Arlington’s climate stresses Therma-Tru hardware in ways the manufacturer’s generic care guide doesn’t address.

Why Trust Barrett & Sons Construction Arlington for Your Therma-Tru Construction?

Our crews have installed and serviced every major Therma-Tru line for decades, and our technicians bring up to 28 years of experience to the work. That matters on a brand where the difference between a door that seals for fifteen years and one that leaks in two often comes down to a few millimeters of sill pan slope and the right flashing detail at the threshold.

We’re factory-trained in best practices for these systems, and we carry OEM Therma-Tru hinges, sills, and weatherstripping that fit exactly and keep your warranty intact. We also publish our name, address, and license number, so you can look us up before you sign anything. The crew that shows up is background-checked and carries the Barrett & Sons name, and Tom Barrett’s sons run the crews. This isn’t a franchise sending strangers.

We’re an independent Therma-Tru service provider. Therma-Tru doesn’t authorize us, and we don’t claim it. What we do claim is that we’ve seen how Fiber-Classic doors fail in Arlington’s west-facing openings and how Smooth-Star sills behave after a hail season. That’s worth something when the fix needs to hold.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Therma-Tru Construction Problems We Fix in Arlington

Here’s what we actually find on Therma-Tru doors around Arlington, and why it happens here rather than in a milder climate:

  • Smooth-Star sill pan corrosion and water infiltration. Arlington’s spring storms push water hard against thresholds, and when flashing at the sill is improvised or skipped, the pan corrodes and water wicks under the slab. We see this most on doors installed during post-hail rebuild surges, when crews were stretched thin and flashing details got rushed.
  • Fiber-Classic hinge screw pull-out and sagging. Repeated slamming and misaligned strikes work hinge screws loose over time. On the expansive clay soil common across central and east Arlington, slab movement nudges doors out of square, the strike misaligns, and the problem compounds until the door drags or won’t latch.
  • Faded or chalky stain on Pulse doors. Pulse finishes take a beating in 100°F summers with intense UV. South- and west-facing doors go chalky within a few seasons unless they’re recoated on schedule. The finish protects the fiberglass beneath it, so letting it fail is more expensive than a recoat.
  • Warped or sticking Benchmark slabs from thermal bowing. Unshaded west-facing openings heat unevenly, and Benchmark slabs can bow enough to bind against the frame. It’s a slow, seasonal problem that shows up worst in late summer.
  • Deteriorated weatherstripping and air leaks. North Texas temperature swings wear the seals faster than in steady climates. A door that feels fine can still leak conditioned air and let water past the sweep on a wind-driven rain.

Therma-Tru Parts & Our Repair-vs-Replace Approach

We source OEM Therma-Tru hinges, sills, and weatherstripping for exact fit and warranty compatibility. When OEM glass lead times would stall a job, we’ll use a quality aftermarket glass unit and tell you straight why. We don’t claim a local parts warehouse, and we don’t pretend parts appear from a van. Each job gets sourced for that door.

Repair or replace comes down to one question: is the slab sound? If the issue is hardware, weatherstripping, or finish, repair is almost always right. If the frame or sill is compromised, replacement is more cost-effective, and we’ll say so even when a repair bill would be easier to sell. Usually, a homeowner notices daylight around a Therma-Tru Fiber-Classic entry after heavy rain, and the cause is a failed sill pan or worn weatherstripping wicking water under the slab. A proper fix means pulling the door, checking the rough opening for rot, replacing the pan with a sloped and sealed unit, installing new OEM weatherstripping, and rehanging with adjusted hinges and strikes. Call (888) 590-9867 for a free second opinion on any written estimate.

Our Therma-Tru Service Process – Step by Step

  1. 1
    Diagnosis. We check the door for square, test the latch and strike alignment, inspect the sill pan and threshold flashing, and look at the finish for UV damage. On Arlington doors we also check the surrounding slab for movement, since clay-related settling is often the real cause of a sticking door.
  2. 2
    Scope in writing. Before any work begins you get a written scope with line-item pricing. If a price changes, a written change order comes first. An allowance that isn’t on paper is a surprise waiting for a date.
  3. 3
    Repair or install. OEM hinges, sills, and weatherstripping are set to Therma-Tru specs. Flashing at the threshold gets the detail it needs to survive an Arlington hail season.
  4. 4
    Test. We open, close, and latch the door repeatedly, check the seal with a water test where relevant, and confirm the hardware operates smoothly.
  5. 5
    Warranty. The written 90-Day Done Right Promise goes on your contract. If something’s not right, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Therma-Tru Products We Service & Install in Arlington

We service and install the full Therma-Tru residential range: Smooth-Star fiberglass entry doors, Fiber-Classic and Fiber-Classic Oak doors, Pulse doors and sidelites, and Benchmark entry systems. We handle entry doors, patio and French door units, sidelites, transoms, and the hardware, sills, and weatherstripping that keep them performing. Whether it’s a single entry replacement or doors for a whole storm-restoration rebuild, we’ll quote it in writing. Our crews also handle window replacement, roof repair, and full bathroom remodeling for Arlington homes, which matters when a door leak has done interior damage.

We Also Service These Brands

Therma-Tru is one of the brands we work on, not the only one. We install and service KraftMaid and Cambria in kitchens, Silestone countertops, and Kohler fixtures in baths, along with GAF and CertainTeed roofing and Andersen and Marvin windows. That depth means we can handle the whole job when a door replacement turns into a bigger fix.

FAQs – Therma-Tru Construction Service in Arlington

Service Typical Arlington Range
Window Replacement $4,500 – $15,000
Roof Repair $400 – $1,800
Bathroom Remodel $9,000 – $28,000

Door repair and replacement pricing depends on the series, hardware, and whether the sill or frame needs work. Call (888) 590-9867 for an exact quote on your door. Estimates are free.

Book Your Therma-Tru Service in Arlington, TX

If your Therma-Tru door is sticking, leaking, or showing its age, call Barrett & Sons Construction Arlington at (888) 590-9867. We’ll diagnose it, quote it in writing, and tell you honestly whether it’s a repair or a replacement. Call (888) 590-9867 to schedule your free estimate.

Written by the team at Barrett & Sons Construction Arlington.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch