Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Arlington, and what makes our Dvele work different is that we understand how the factory modules actually behave once they’re sitting on Blackland Prairie clay: seams move, casework racks, and chases don’t relocate themselves. We’re Barrett & Sons Construction Arlington, an owner-operated firm founded in 1998, and we’ve completed Dvele-backed kitchen and bath remodels across the metroplex. We are not affiliated with, authorized by, or endorsed by Dvele. That independence is the point: we can repair, reconfigure or complete a Dvele shell without steering you back to the factory for every decision. Permit gets pulled, price changes come in writing, and Tom Barrett’s name is on the truck. Call (888) 590-9867 for a free estimate.
Why Trust Barrett & Sons Construction Arlington for Your Dvele Construction?
Dvele homes are not stick-built homes with a different logo on the plans. The walls arrive in panels, the mechanical and plumbing chases run through a pre-built core, and the finishes are applied in a factory before the modules ever leave the yard. Our technicians have up to 28 years of experience, and a good share of that has been spent learning why factory finishes fail in the field rather than in the factory.
That matters for parts. For Dvele cabinetry, panel hardware and finish trim, we match factory profiles and finishes rather than substituting generic stock, because a Home Depot hinge on a Dvele door reads as a repair from ten feet away. For concealed hinges, drawer slides and shower glass hardware, quality aftermarket equivalents are fine and often faster to source. Warranty-safe service means we don’t punch holes in a factory panel without a plan to restore it, and we don’t touch a module connection without verifying the foundation first. Every eligible job includes permits pulled and inspections signed, and every price change arrives as a written change order before work proceeds.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Arlington
Arlington’s expansive clay swells and shrinks with the seasons, and Dvele’s modular system reacts to that movement differently than site-built construction does. Here’s what we see most:
- Module-joint movement at panel seams. Factory-finished drywall and tape at module interfaces crack or telegraph as the modules settle differentially on the foundation. Hairline cracks running vertically at a seam are the classic sign, and they tend to appear fastest after a dry summer followed by a wet fall, which is exactly Arlington’s pattern.
- Cabinet and casework racking. Dvele’s factory cabinetry is built to module dimensions, so minor foundation or framing movement shows up as door and drawer misalignment and gapping at the seams rather than as a simple hinge adjustment. Homeowners often call us for “loose hinges” and the real issue is the module behind them.
- Service-penetration and chase conflicts. Mechanical and plumbing chases run through the pre-built core, so adding outlets, moving a sink or relocating a shower valve means opening and re-sealing a factory-finished panel, not just cutting drywall. That’s a different job with a different sequence.
- Transport and set handling damage. Corner damage, scuffed factory finishes and cracked tile at module edges often surface after set. They need coordinated finish repair, not a spot patch that leaves a visible ring.
- Storm-driven moisture at seams and penetrations. Arlington sits in the DFW hail belt, and wind-driven rain finds the weakest point on any shell. A seam that’s already moving is the first place water gets in, so storm restoration and module-joint repair usually go together here.
Dvele Parts & Our Repair-vs-Replace Approach
We source Dvele parts per job. We don’t claim to stock Dvele components locally, and anyone who tells you they do is guessing. What we do is match factory profiles and finishes for cabinetry, panel hardware and finish trim, and use quality aftermarket equivalents where the original part adds cost without adding value.
Repair is almost always the right call on intact Dvele cabinetry and panels. Wholesale replacement only makes sense when module-joint movement or water intrusion has compromised the substrate. We’ll tell you which one you’re looking at, in writing, before anything gets ordered. Call (888) 590-9867 for a free second opinion on any written estimate you’ve already received.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We open the seam or panel in question and check the module connection and the foundation beneath it before we touch the finish. Cracks that keep returning usually mean the movement source was never addressed.
- 2
Foundation and module verification. If the modules are settling differentially, we confirm why. On Arlington’s clay, that often means a foundation conversation before a cosmetic one.
- 3
Repair or install. Re-tape and refinish the joint, reset hinges and drawer slides, or open and re-seal a chase for a new sink or shower valve, finished to factory appearance rather than patched with generic stock.
- 4
Test. Doors close flush, drawers run true, water runs where it should, and penetrations hold. We check the module, not just the part.
- 5
Warranty. Every completed job is backed by our written 90-Day Done Right Promise. If it’s not right, one call brings Tom back.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Arlington
We work on Dvele modular single-family home shells, including panelized wall and floor modules and the joints between them. We handle Dvele factory-finished kitchen and bath cabinetry packages, from hinge and slide resets to full reconfigure. We service Dvele pre-assembled mechanical and electrical core modules, where the kitchen and utility walls carry the chases. And we work with Dvele prefabricated bathroom pod assemblies, including walk-in shower upgrades and tile work around the pod. Full kitchen remodeling, walk-in shower installation and tile and flooring are the three jobs we’re called for most often on Dvele homes in Arlington, and they’re where the module system and the site-built world meet.
We Also Service These Brands
Dvele is one system among many, and we’re not single-brand dependent. We install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures alongside Dvele work, and our roofing crews run GAF and CertainTeed on storm rebuilds across Arlington. If your kitchen is half Dvele factory and half KraftMaid after a remodel, we can make the two read as one room instead of two systems arguing.
FAQs – Dvele Construction Service in Arlington
Yes, a Dvele factory kitchen can be reconfigured, provided the work is sequenced so that any opened panel is re-sealed and refinished to factory appearance rather than patched. The catch is that Dvele’s cabinetry is built to module dimensions, so moving a sink or adding a run means working with the chase inside the core, not just cutting drywall. Since we’re an independent firm and not tied to Dvele, we can plan that sequence without sending every decision back to the factory. Call (888) 590-9867 to talk through your layout before you commit to anything.
Dvele module seams crack because the modules settle differentially on the foundation, and factory-finished drywall tape at the interface can’t absorb that movement. In Arlington, the expansive Blackland Prairie clay beneath most homes swells and shrinks seasonally, which is why these cracks show up most visibly after a dry summer followed by a wet fall. Re-taping without checking the module connections underneath usually means the crack comes back.
Yes, a Dvele bathroom pod can be upgraded to a walk-in shower, but it’s a chase-and-panel job rather than a simple fixture swap, because the shower valve and drain sit inside the pre-built core. We open the panel, relocate what needs relocating, re-seal it, and finish the tile so the result looks factory rather than added-on. Walk-in shower installation in Arlington typically runs $4,500 – $12,000 depending on the pod and the tile. Call (888) 590-9867 for an exact quote – estimates are free.
Call a local contractor who understands Dvele’s module dimensions, because damage and misalignment after set are usually two different problems with two different fixes. Corner damage and scuffed finishes from transport need coordinated finish repair; doors and drawers that won’t line up usually mean the module itself has racked. We handle both and put the scope in writing before work starts.
A Dvele roof needs the same roofing work as a stick-built roof, but the seams and penetrations below it warrant a closer look after a storm, since a moving module joint is where wind-driven rain gets in. Arlington hail rebuilds are routine here, and we run GAF and CertainTeed systems with permits pulled and inspections signed. Roof repair in Arlington runs $400 – $1,800 and full replacement $8,000 – $20,000. Call (888) 590-9867 for a free second opinion on any written estimate.
Dvele construction work in Arlington depends on the scope, but the line items below are the ranges we hold to, and every price change arrives as a written change order before work proceeds. No surprise invoices at the end.
| Service | Typical range in Arlington |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Call (888) 590-9867 for an exact quote – estimates are free, and we’ll give you a second opinion on any written estimate you already have at no charge.
Book Your Dvele Service in Arlington, TX
If your Dvele home has seams that keep cracking, cabinets that won’t close flush, or a chase that needs to move, we’ll come look and give you a written scope with the price on it. A live person answers our phone around the clock, and Tom’s name and license number are published for you to check before you sign anything. Call Barrett & Sons Construction Arlington at (888) 590-9867 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Arlington.