Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in North Richland Hills, TX | Barrett & Sons Construction Arlington
We provide independent Master Halco construction service across North Richland Hills, and the one thing that sets our work apart here is simple: on this city’s lots, the ground moves more than the fence does. North Richland Hills sits on blackland clay that swells and shrinks with every wet and dry cycle, and that movement decides whether a Master Halco fence or gate system holds for a decade or starts leaning by next spring. We’re Barrett & Sons Construction Arlington, an independent provider with deep familiarity with Master Halco systems. Call (888) 590-9867 for a free estimate.
Why North Richland Hills Residents Choose Us for Master Halco Service
Fence work in North Richland Hills rewards a crew that reads the lot before it reads the catalog. We know the Master Halco lines people actually buy here (ColorBond ornamental steel, aluminum ornamental runs, two-rail and three-rail vinyl privacy) and where each one tends to fail once the clay starts working on it. We match OEM-compatible Master Halco hardware to systems that are still serviceable instead of swapping in whatever aftermarket latch is closest at hand, which is the usual source of a gate that droops and never quite latches. Our technicians have up to 28 years of experience, and every eligible job is permitted and inspected. We publish a name and a license number you can look up before you sign.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Master Halco Construction Problems We Solve in North Richland Hills
- Heaved and leaning posts. Posts set in concrete at the original grade pull loose when 76180 and 76182 clay swells after rain, then stay loose once it dries. We reset to proper depth and spacing, or replace the post if the concrete collar has cracked away.
- Hail-bent pickets and twisted gates. North Texas hail and high wind bend ornamental steel pickets and twist aluminum and ColorBond gate frames, throwing latches out of line. We true the frame and re-hang on fresh Master Halco hardware.
- Rust at field-cut ends and welded joints. Galvanized and powder-coated panels cut in the field without touch-up chalk, scratch, and rust at the exposed edges. We cut, seal, and touch up as part of the install.
- Vinyl cracked at the bottom rail. On older shaded lots, panels bow and crack where soil movement and sun exposure meet. We replace by section rather than pulling a whole property.
- Over-spaced posts on ornamental runs. Spacing over 8 feet lets a run sag and a gate drop the moment the hardware carries weight. We set spacing to spec before anything gets hung.
Master Halco Service in North Richland Hills: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes almost every fence and addition job in North Richland Hills: the older core off Davis Blvd and Rufe Snow Dr was platted in the 1970s, and many of those lots carry recorded rear easements that restrict where a new pool deck, an addition, or even a fence run can legally go. If we lay out a line before checking the recorded plat, we can build a perfectly good fence in the wrong place. So we check the plat first, then set the string line against it. Combine that with cast-iron sewer laterals and 100-amp panels on those same original homes and you start to see it: this city isn’t greenfield. It’s established 1960s to 1990s subdivisions where lot size, mature trees, and aging infrastructure set the scope far more than new-build code does.
Master Halco Models & Products We Service in North Richland Hills
We work across the Master Halco product families you’re most likely to have on your property: ColorBond and Colorcoat ornamental steel panels, aluminum ornamental fence and gate systems, two-rail and three-rail vinyl privacy fencing, and chain-link with gate hardware components. Parts are sourced per job to your existing system’s spec, not pulled from local stock, so we order the correct OEM-compatible hinge, latch, post cap, or rail for what’s actually on the ground. If your system is still serviceable, we repair it. If the base has rusted through or the posts are heaved past a re-set, we replace by section. See more on our Master Halco service.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in North Richland Hills
Most fence work in North Richland Hills runs within the ranges below. What pushes you toward the high end: tight lots with mature trees, easement constraints that force a shorter or angled run, and any repair work that starts with resetting heaved posts before a single panel goes up. A free estimate includes a string-line layout, a plat check for rear easements, and a written line-item scope with allowances spelled out, so a price change only arrives as a written change order before work starts.
| Service | Typical Range |
|---|---|
| Vinyl Fence Installation | $3500 – $9000 |
| Aluminum Fence Installation | $4000 – $10000 |
| Home Addition | $45000 – $130000 |
Call (888) 590-9867 for an exact quote. Estimates are free.
Serving North Richland Hills, TX – Our Local Coverage Area
We serve North Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in North Richland Hills
Usually a repair. A sagging gate on a Master Halco ornamental system is normally a hardware and post problem, not a whole-run problem: the posts have heaved or the original hinges have worn, so the fix is resetting posts to proper depth and re-hanging the gate on new OEM-compatible Master Halco hardware. We only recommend replacement when the base is rusted through or a post is heaved past the point of a re-set. Call (888) 590-9867 for a free estimate and we’ll tell you which it is.
Often, yes. Many 1970s plats in the older core off Davis Blvd and Rufe Snow Dr carry recorded rear easements, and those restrict where a fence run or an addition can legally sit. We pull the recorded plat before we set a string line so you don’t build into an easement. Call (888) 590-9867 and we’ll check yours as part of the free estimate.
It holds up well, but not untouched. Aluminum and ColorBond ornamental systems handle the sun and the clay better than many alternatives, but hail and high wind can still bend pickets and twist gate frames. That’s why we hang gates on proper hardware and check spacing, so a bent picket or a shifted latch is a small repair instead of a rebuild. Call (888) 590-9867 for a free estimate.
Two forces meet there: soil movement lifting or sinking the post, and sun baking the panel while the shaded base stays damp. On older North Richland Hills lots with mature trees, that combination bows and cracks the bottom rail first. We replace the affected section rather than the whole property. Call (888) 590-9867 for a free estimate.
Deeper and more carefully than the minimum, with the concrete collar sized for the soil and the spacing held to spec. Blackland clay heaves and settles, so a post set at original grade in 76180 or 76182 will work loose within a season or two. We set to proper depth, check spacing, and reset posts before panels go up. Call (888) 590-9867 for a free estimate.
Service Areas Near North Richland Hills
We also serve homeowners in Arlington, Kennedale, Forest Hill, Richland Hills, and Bedford, and our Watauga and Hurst neighbors get the same fence and gate work. Our North Richland Hills service area covers 76180 and 76182.
Book Your Master Halco Service in North Richland Hills Today
A typical job starts with a leaning fence and a gate that won’t latch after a clay swing. We pull a string line, check the plat, reset or replace the posts, and re-hang the gate on new Master Halco hardware. Call (888) 590-9867 to schedule your free estimate, and ask about our $40 off any repair over $200 and our permanent 10% senior and veteran discount.
Written by the team at Barrett & Sons Construction Arlington.