A Barrett company - serving Arlington, TX

Master Halco Construction in Burleson, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Master Halco Construction in Burleson, TX | Barrett & Sons Construction Arlington

We provide independent Master Halco service across Burleson, installing and repairing Delgard steel, aluminum, and vinyl fence systems from the manufacturer’s published specs, not a dealer agreement. What makes our Master Halco work here different is the ground under it: fence lines on the newer south and west subdivisions sit on virgin expansive clay, so posts set to old footing depths fail faster than anywhere in the older 76028 core. If your gate drags or your panels have started to bow, call (888) 590-9867 for a free estimate.

Call (888) 590-9867

Why Burleson Residents Choose Us for Master Halco Service

Master Halco fence is a common sight along the property lines in Burleson, and we know the lines well enough to tell you what’s on your lot from across the street. Delgard steel and aluminum, the vinyl privacy and picket series, the ornamental aluminum in both residential and commercial grades, and chain link with privacy slats and top-rail accessories: we work on all of it. Details matter here. A 2012 vinyl privacy run and a 2019 run can look alike until you need a matching panel, a cap, or a bracket. We match OEM Master Halco posts, rails, panels, brackets, and caps wherever the series is still in production, so the color and profile stay consistent instead of turning into a patchwork. When a line has been discontinued, we size a quality aftermarket equivalent to the posts you already have rather than forcing a mismatched panel into the run.

We’re an independent contractor working across Burleson service area, which means we can repair one series without selling you a whole new fence. And every quote is written: scope in writing, allowances in writing, change orders in writing. That’s not a slogan. It’s how we keep a surprise invoice from showing up after the work is done. Our technicians have up to 28 years of experience, and every fence job we take on is backed by our 90-Day Done Right Promise. If something’s off after we leave, one call brings us back.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Master Halco Construction Problems We Solve in Burleson

  • Vinyl privacy sections racking and panels bowing. On the newer south Burleson lots, this is almost always a soil problem, not a fence problem. Posts were set in shallow concrete footings that don’t reach below the active clay. When that clay swells and shrinks, the posts move, and the panels rack with them.
  • Post footings heaved or pushed out of plumb. The North Texas wet-spring, dry-summer cycle works a footing loose until gates drag and rails pop free of the post brackets. We pull the affected posts, reset them deeper, and re-hang the gate so it swings true again.
  • Sun and hail damage on vinyl. After years of hard UV and spring hail, Master Halco vinyl panels go chalky and brittle and pickets crack. We see this most on five-to-fifteen-year-old installations in the western subdivisions, where there’s little shade and full afternoon sun.
  • Rust and corrosion on aluminum and steel. The factory finish on a Master Halco system is tough until it’s breached. Cut ends, welded joints, and ground-contact points that were never touched up during the original install are where corrosion starts, and it runs up the post from there.
  • Color and profile mismatches from prior patch jobs. A common find in Burleson is a fence repaired once before with the wrong panel or an off-brand rail. We identify the Master Halco series on the property and match it properly so the repair doesn’t stand out as a stripe of a different color.

Master Halco Service in Burleson: What Local Conditions Mean for Your Equipment

Much of Burleson’s south and west side was pasture a decade ago. That land now sits under post-tension slabs on virgin expansive clay, and the fences along those property lines move with the same soil. Here’s the part worth understanding: posts set to the old footing depths used in the 76028 core around Ellison and Wilshire simply don’t hold in that newer ground. The active clay zone is deeper, and a shallow footing sits right in the middle of the swelling and shrinking. That’s why a Master Halco vinyl fence in a newer south-side subdivision can start leaning in five or six years while a similar fence closer to downtown Burleson holds for twenty. We set and reset posts below the active clay zone with proper concrete and drainage. And because our crews work on Master Halco systems every week, we can usually tell from the failure pattern whether it’s soil, hail, or the original install.

A typical Burleson call involves a vinyl privacy fence in a newer south-side subdivision where several panels have bowed and a gate drags, usually because posts were set in shallow footings that the expansive clay has since heaved and rotated. A qualified local pro pulls and resets the affected posts below the active clay zone with proper concrete and drainage, replaces the damaged Master Halco panels, rails, and brackets with matching components, and re-hangs the gate so it swings true.

Master Halco Models & Products We Service in Burleson

We handle the full range of Master Halco fencing that shows up on Burleson properties: Delgard steel, aluminum, and vinyl privacy lines; the vinyl privacy and picket series; ornamental aluminum in residential and commercial grades; and chain link systems with privacy slat and top-rail accessories. Our parts approach is straightforward. We match OEM Master Halco posts, rails, panels, brackets, and caps wherever the series is still in production, so color and profile stay consistent with what’s already there. When a line is discontinued, we use a quality aftermarket equivalent sized to the existing posts rather than forcing a mismatched panel. We source parts per job for the specific system on your property; we don’t claim to stock Master Halco parts locally. Repair is usually the right call for a few damaged sections. Widespread footing failure or a whole-line color mismatch makes replacement the honest recommendation, and we’ll tell you which one you’re looking at.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Master Halco Service Pricing in Burleson

Fence work here runs a wide spread depending on length, series, and how much footing correction the clay demands. Here’s what our Burleson projects typically fall into:

Project Typical Range
Vinyl Fence Installation $3,500 – $9,000
Aluminum Fence Installation $4,000 – $10,000
Driveway Replacement $5,000 – $14,000

What drives the cost is line length, the series you choose, and how many posts need to be reset below the active clay zone. A straight replacement over stable footings costs less than a repair where the soil has already moved the posts. Your free estimate is a written, line-item quote with the scope spelled out, so you know what’s included before anyone touches a post. Call (888) 590-9867 for an exact quote – estimates are free.

Serving Burleson, TX – Our Local Coverage Area

We serve Burleson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Master Halco Construction in Burleson

Can you match the Master Halco vinyl fence series already on my Burleson property? Yes. We identify the series on your property and match OEM Master Halco panels, posts, rails, brackets, and caps wherever that series is still in production, so the repair blends into the run instead of standing out. If the line is discontinued, we size a quality aftermarket equivalent to your existing posts. Call (888) 590-9867 and we’ll take a look.

Why are my fence posts leaning on my newer south Burleson lot? Because the posts were set in shallow footings that sit inside the active expansive clay zone, and that clay has since heaved and rotated them. It’s a soil issue common to the newer south and west subdivisions, not a defect in the Master Halco fence itself. Pulling and resetting the posts below the active clay zone with proper concrete and drainage is the fix. Call (888) 590-9867 for a free estimate.

Is hail damage to a vinyl Master Halco fence covered by repair or replacement? Usually repair, if the damage is limited to a handful of cracked pickets or panels. We replace the damaged sections with matching components and leave the sound runs alone. Widespread cracking or a whole-line color mismatch after years of UV exposure is when replacement becomes the honest call. Call (888) 590-9867 and we’ll tell you which you’re facing – the estimate is free.

Will an aluminum Master Halco fence hold up to North Texas storms better than vinyl? Generally, yes. Aluminum won’t go chalky or brittle under UV the way vinyl does, and it shrugs off hail better. The trade-off is that any breach in the factory finish at cut ends, joints, or ground contact will corrode if it isn’t touched up during install. Either way, we set the posts to the local soil. Call (888) 590-9867 for a free estimate.

How does a fence install interact with driveway and drainage work on my lot? On Burleson’s clay, they’re connected more than most homeowners expect. Water that pools at a driveway edge or a low corner will soften the soil around nearby fence posts and speed up heaving. When we quote a fence alongside driveway replacement, we plan the grading and drainage so the fence footings aren’t sitting in the path of runoff. Call (888) 590-9867 to schedule your free estimate.

Service Areas Near Burleson

We also work Master Halco fence systems in Crowley and Rendon, and we serve homeowners in Arlington, Kennedale, Forest Hill, Richland Hills, Hurst, and Bedford. If you’re just outside Burleson, call and we’ll confirm coverage. Learn more about our Master Halco service, or see the Crowley and Rendon pages if you’re nearby.

Book Your Master Halco Service in Burleson Today

Whether it’s a dragging gate, a leaning post line, or a hail-battered vinyl run, we’ll give you a written quote with the scope spelled out before any work starts. Call (888) 590-9867 to schedule your free estimate in Burleson. A live person answers the phone around the clock, and we offer a free second opinion on any written estimate you already have.

Written by the team at Barrett & Sons Construction.

Need Construction help in Burleson? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Burleson

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch