Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Hurst, TX | Barrett & Sons Construction Arlington
We provide independent Ameristar service across Hurst, and the one thing that shapes our work here is spacing. Hurst is fully built out, so replacing an Ameristar condenser in 76053 or 76054 usually means squeezing a new unit into a tight side yard under a mature pecan canopy instead of setting it on open ground. That changes clearance, line-set routing, and how fast a no-cool call in August gets fixed. We’re not affiliated with or authorized by Ameristar, just fluent in what these units do after twenty North Texas summers. Call (888) 590-9867 for a free estimate.
Why Hurst Residents Choose Us for Ameristar Service
Ameristar has been the value-tier name on a lot of Hurst ranch homes for years, which means the equipment we see in your side yard is usually original or close to it. We’ve worked on the M4AC4 and M4AC5 condensers, the M4AH4 air handlers bolted into those hot attics, and the M4HP4 heat pumps enough times to know exactly which capacitor will be swollen and which contactor will be pitted before we pull the panel.
That familiarity cuts to the diagnosis instead of the parts cannon. We pull OEM-compatible Ameristar parts when they make sense and matched aftermarket consumables when they don’t, and we hand you the reasoning in writing.
What you get here is the owner-operated side of the trade. Tom Barrett and his sons run the crews, every permit gets pulled, and every price change arrives as a written change order before work starts. Our technicians have up to 28 years of experience, calls are answered by a live person around the clock, and the 90-Day Done Right Promise is written on every contract. Ask anyone on your street, or look up the license number yourself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Ameristar Construction Problems We Solve in Hurst
- Run capacitors and contactors giving out after hot summers. Repeated 100°F+ Hurst Julys cook the run capacitor on an Ameristar M4AC4 or M4AC5 condenser until it bulges and the unit hard-starts or won’t start at all. The contactor pits about the same time. These are the two most common no-cool calls we get, and they’re usually a same-visit repair.
- Evaporator coil leaks in attic air handlers. An M4AH4 air handler mounted in a 1960s-70s Hurst attic can hit 140°F+ by early afternoon in July. That heat plus condensate corrosion is what eats evaporator coils, and it’s why a leaking coil shows up here more often than on a newer build with a conditioned mechanical closet.
- Cracked drain pans and float-switch trips. Ameristar air handlers sitting on aging slab-adjacent platforms in Hurst often have a drain pan that’s cracked or sagging. The float switch trips, the system shuts down, and the real fix is re-leveling the platform and replacing the pan, not resetting the switch for the fifth time.
- Compressor short-cycling on undersized returns. Original tract-home ductwork in Hurst was never sized for the equipment that’s been swapped in over the decades. When the return is too small, the compressor short-cycles and runs hotter than it should, which shortens the life of an otherwise healthy Ameristar unit.
- Condenser clearance choked by the canopy and fence line. Hurst’s mature pecan and live oak cover plus tight infill setbacks leave many condensers starved for airflow. A unit crammed against a fence under low branches runs a higher head pressure, which stresses the compressor every summer.
Ameristar Service in Hurst: What Local Conditions Mean for Your Equipment
Here’s the piece that doesn’t show up on a generic Ameristar page: Hurst is a fully built-out inner-ring Mid-Cities suburb, and there’s essentially no greenfield left inside the city limits. Most lots in 76053 and 76054 were platted in the 1960s and ’70s, so when an Ameristar condenser finally gives out, the replacement doesn’t go on a fresh pad in open ground. It goes wherever the original builder put it, and where the tree, the fence line, and the side-yard setback will allow today. We end up deciding clearance and line-set routing around a live oak that’s forty years older than the equipment. On tighter streets especially, the layout of the yard decides the job more than the spec sheet does, and a good Ameristar replacement plan starts with where the air can actually move.
Ameristar Models & Products We Service in Hurst
We handle the Ameristar lines that turn up most on Hurst ranch homes: the M4AH4 air handler series, the M4AC4 and M4AC5 condenser units, the M4HP4 heat pump series, and the Ameristar gas furnace lines paired with M4 series coils. Alongside those we take on the big-ticket construction work many Hurst homeowners fold into the same project: roof replacement and installation, full kitchen remodeling, and full bathroom remodeling.
On parts, we use OEM Ameristar capacitors, contactors, and coils when they’re available and priced sanely. For consumables, a matched-run capacitor or a universal contactor does the job just fine, and we’ll say so. We don’t claim local stock; parts get sourced per job, and we’ll tell you the lead time up front so there’s no guessing. Find more of our Ameristar service depth here.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Hurst
Here’s roughly what this work runs in Hurst. These are real ranges, not teasers, and your written estimate will itemize scope and allowances line by line.
| Service | Typical Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
Cost is driven by equipment condition, parts availability, attic access, and whether the job is a repair or a full replacement. A free estimate includes a written scope, the parts approach, and any permit requirements spelled out before anyone touches the unit. Call (888) 590-9867 for an exact quote on your Hurst Ameristar work.
Serving Hurst, TX – Our Local Coverage Area
We serve Hurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Hurst
It’s usually the unit, not the house wiring: a failing run capacitor, a pitted contactor, or a compressor drawing high amps after years of 100°F+ summers. A qualified pro tests the electrical components and checks the refrigerant charge before blaming the panel. Call (888) 590-9867 for a diagnosis, free estimates included.
Yes. An M4AH4 air handler in a Hurst attic can hit 140°F+ in July, which speeds up drain pan cracking and float-switch fatigue. A secondary pan and a properly pitched drain line are worth installing on an older platform. Call (888) 590-9867 to have yours checked.
Repair the Ameristar unit while the compressor and coil are sound; replace it when a leaking coil plus a failing compressor together cost more than the equipment is worth. That’s the honest line. Call (888) 590-9867 to talk through which side of it you’re on.
Yes, and it’s worth doing after a hail event. Coordinating the two lets the roof crew and the equipment install share access and staging, which saves hassle on Hurst’s tight lots. Call (888) 590-9867 to schedule a combined free estimate.
Undersized return ductwork from the original tract-home build is the usual culprit, sometimes compounded by a condenser choked against a fence under a pecan canopy. Resizing the return often fixes more than replacing equipment does. Call (888) 590-9867 for an assessment.
Service Areas Near Hurst
We work throughout Hurst service area and the surrounding Mid-Cities, including Arlington, Kennedale, and Forest Hill, plus Bedford and Richland Hills. If you’re on the edge of 76053 or 76054, call and we’ll tell you straight whether you’re inside our service range.
Book Your Ameristar Service in Hurst Today
Call (888) 590-9867 to schedule your free estimate on Ameristar work in Hurst. Our technicians have up to 28 years of experience, a live person answers the phone around the clock, and every price change shows up in writing before the work moves. That’s the Barrett & Sons way.
Written by the team at Barrett & Sons Construction Arlington.