Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Forest Hill, TX | Barrett & Sons Construction Arlington
We provide independent Jerith service across Forest Hill: aluminum fence installation, repair, and gate adjustment on Classic, Regent, Majestic, and commercial-grade lines. The one thing that sets our Jerith work apart here is footing depth. Forest Hill’s older lots sit on expansive blackland clay, and posts that were set the standard shallow way heave and lean within a couple of seasons. We set ours deeper, with bell-shaped footings built for this ground.
Barrett & Sons Construction Arlington is an independent Jerith service provider. We’re not affiliated with or authorized by the manufacturer, and no warranty endorsement is implied. What we bring is hands-on familiarity with these products across North Texas. Our technicians have up to 28 years of experience, and every job comes with permits pulled where eligible, written change orders before any scope change, and our 90-Day Done Right Promise. Call (888) 590-9867 to talk through your fence.
Why Forest Hill Residents Choose Us for Jerith Service
Jerith aluminum fencing is a specific product with specific habits. Posts are hollow extruded aluminum, panels are rackable, and the factory powder coat is only as good as the prep under it. We’ve installed and repaired ornamental aluminum fencing across North Texas for over a decade, so the failure patterns here aren’t a mystery to us. We know where the finish tends to break down first, and we know what a gate that drags in July is telling you about the ground underneath.
Forest Hill homeowners tend to get burned by outfits that quote one number on the phone and hand over a different bill. We do the opposite. Every scope and allowance arrives in writing. Every price change is a written change order before work starts. Parts are OEM Jerith for structural pieces and hardware, so fit and finish stay right, and we set those parts on footings engineered for expansive soil rather than whatever concrete was cheapest that week. A live person answers the phone, day or night. Call (888) 590-9867 and you’ll get a real voice, not a voicemail box.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in Forest Hill
- Leaning and heaving posts. This is the big one in Forest Hill. The blackland clay under these lots swells when it’s wet and shrinks when it’s dry, and standard shallow footings can’t hold against that movement. Posts lift, panels rack out of square, and gates start to bind. Reset footings, done right, fix it.
- Powder-coat chipping and peeling. North Texas heat and UV hammer south- and west-facing panels hardest. Once the finish cracks, moisture gets under it and the aluminum starts to pit at the edges. We prep and recoat or replace the affected sections rather than letting it spread.
- Rust at cut ends and welded joints. Anywhere the factory finish was breached during installation, humidity and the occasional flood-level rain find it. Cut ends and weld points are where it shows first. Sealing those spots during install prevents most of it.
- Gate sag and hardware wear. Seasonal ground movement plus thermal expansion works gate hinges and latches loose over time. A gate that clears the ground in January and drags in August is usually telling you the post moved, not the gate.
- Storm and flood damage to older fence lines. Forest Hill’s periodic drought-to-flood swings push water against fence lines that were never built for it. Panels bend, posts shift, and sections need re-setting or partial replacement.
A typical Jerith aluminum fence in Forest Hill might show leaning posts and a dragging gate after a wet spring followed by a dry summer. The cause is expansive clay pushing against shallow original footings. A qualified local pro would reset the affected posts with deeper, bell-shaped concrete footings and re-level the panels, rather than tearing out the whole fence.
Jerith Service in Forest Hill: What Local Conditions Mean for Your Equipment
Here’s what makes Forest Hill different from a newer suburb a few miles away. Almost nothing here is new construction. The 1950s through 1970s brick-veneer and frame homes on these small lots were built when fence lines were often set right at the property boundary, poured straight over original clay backfill with no thought to how that ground would move over sixty years. In a greenfield subdivision, a fence contractor is working with graded, settled soil. In Forest Hill, working along ZIP 76119, a Jerith post is going into ground that has been swelling and shrinking under a house since the Eisenhower era. That’s why our footings here run deeper and wider at the base than a standard installation would call for. It’s not upselling. It’s the difference between a fence that holds its line and one that racks out of square by the second wet season.
Jerith Models & Products We Service in Forest Hill
We work on the full Jerith ornamental aluminum line: Classic 3-Rail, the Regent Series, the Majestic Series, and Commercial-Grade fencing. Each has its own rail spacing and post profile, and the hardware doesn’t cross over. For structural components and gate hardware we source OEM Jerith parts so fit and finish hold up. We don’t claim to stock parts locally. Each job gets its parts pulled to spec. For footings and concrete, we use high-quality aftermarket mixes engineered for expansive soils, since the ground here demands more than a factory footing kit provides. Repair is usually the right call unless the post footings have completely failed, in which case replacing those sections costs less than fighting them.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Forest Hill
What you’ll pay depends on run length, gate count, footing conditions, and whether we’re resetting posts or replacing failed sections. These are the ranges we work within:
| Service | Typical Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Aluminum Fence Repair | $500 – $2,500 |
Heavier footing work on Forest Hill’s clay pushes installation toward the upper end. A free estimate includes a walk of the fence line, a look at the existing footings, and a written line-item scope. You’ll know what’s included before anyone digs. Call (888) 590-9867 for an exact quote. Estimates are free.
Serving Forest Hill, TX – Our Local Coverage Area
We serve Forest Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Forest Hill
They lean because the expansive blackland clay under Forest Hill lots moves seasonally, and standard shallow footings can’t resist it. When the clay swells, posts heave; when it dries and shrinks, they settle unevenly. The fix is deeper, bell-shaped concrete footings, not a new fence. Call (888) 590-9867 for an estimate on resetting yours.
Yes. Individual panels and posts on Jerith aluminum fencing can be replaced or re-set without tearing out the whole run. We match OEM Jerith components so the new section lines up with the old. The exception is when post footings have completely failed, where partial replacement of a longer stretch is usually the better value. Call (888) 590-9867 to have us look at yours.
Prevention starts at installation: seal every cut end and welded joint where the factory finish is breached, because that’s where North Texas humidity and heavy rain get in. After that, touch up chips on south- and west-facing panels before moisture works under the coating. If you’re already seeing rust spots, call (888) 590-9867 for an assessment.
Clay soil pushes installation cost toward the upper end of the $4,000 – $10,000 range because deeper, bell-shaped footings require more concrete and more labor. It’s not padding. It’s the difference between a fence that holds and one that leans. Call (888) 590-9867 for a written quote specific to your lot.
Every completed job is backed by our written 90-Day Done Right Promise. If something isn’t right, one call brings us back to make it right. We’re an independent Jerith service provider and don’t imply any manufacturer warranty, but our own promise is on paper and it’s honored. Call (888) 590-9867 to get started.
Service Areas Near Forest Hill
We also handle Jerith work in Arlington, Kennedale, Rendon, Richland Hills, Hurst, and Bedford. Each town’s soil and housing stock shift a little, and we adjust footing depth and approach accordingly. If you’re just outside Forest Hill, we probably cover you. Ask when you call.
Book Your Jerith Service in Forest Hill Today
Leaning posts and dragging gates don’t fix themselves, and they get worse with every wet-dry cycle. Call (888) 590-9867 to schedule your free estimate in Forest Hill. A live person answers around the clock, and you’ll get a written scope before any work starts.
Written by the team at Barrett & Sons Construction Arlington.