Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Arlington, TX | Barrett & Sons Construction Arlington
We install and repair Belgard hardscape systems across Arlington, working as an independent contractor that sources genuine Belgard pavers, wall blocks and caps through authorized distributors. What makes our Belgard work different here is the base, not the brand: Arlington sits on Blackland Prairie clay that moves with every dry-to-wet swing, so a paver patio or driveway only lasts when the excavation and compaction underneath are built for that soil. Call (888) 590-9867 for a free estimate on paver driveways, patios and retaining walls.
Why Arlington Residents Choose Us for Belgard Service
We know the Belgard lines that actually get stocked across DFW, and that matters more than a logo on a brochure. Urbana Stone, Catalina Grana, Dublin Cobble, Lafitt Rustic Slab, Mega-Arbel and Belair Wall – we’ve set and reset all of them, and we know how each one behaves over North Texas soil. When a course needs to match, we match it, because a repair that shows as a patch looks worse than the damage did.
Arlington homeowners get burned by storm-chasers after every hail event, so we put the scope in writing before work starts: what’s being pulled, what’s being re-compacted, what the base looks like under the field. Our technicians have up to 28 years of experience with hardscape, and every eligible job gets permits pulled and inspections signed. You can explore our full Belgard service lineup if you want the wider picture.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Solve in Arlington
- Efflorescence bloom after our wet fall cycles. White haze on gray-tone Belgard pavers gets mistaken for a failed sealer almost every time. It’s usually lime migrating out of the concrete base, not the sealer, and the fix is different from what most people expect.
- Polymeric joint loss where pavers meet the slab. Arlington’s slab-on-clay foundations heave seasonally, so the joint line between a Belgard patio and the house takes the worst of that movement. Sand washes out, edges migrate, and water gets where it shouldn’t.
- Retaining wall settlement and cap separation. Mega-Arbel and Belair walls built without geogrid and proper drainage behind the wall lean and separate at the caps. Clay pressure finds the weak spot every time.
- Spalling and color fade on older pavers. Years of freeze-thaw and summer UV without resealing will dull any Belgard paver. Surface wear is real, but it’s the least urgent problem on this list.
- Sunken courses and heaved edges. The most common call we get in Arlington, and almost always a base problem rather than a defective paver. Under-compacted or too-thin base over expansive clay simply can’t hold a field flat.
Belgard Service in Arlington: What Local Conditions Mean for Your Equipment
Here’s the thing that makes Arlington different even from Fort Worth or Dallas proper: our Blackland Prairie clay swells and shrinks hardest after a dry summer followed by a wet fall. That means Belgard failures here tend to surface in October and November as base movement and joint loss, not as gradual surface wear. A paver driveway in far north Arlington’s newer subdivisions and one in the 1950s-70s brick ranch neighborhoods of central Arlington can fail the same way for the same reason, even though the homes look nothing alike. So when we’re called out to a sunken field or a washed-out joint line, the first thing we check isn’t the paver surface. It’s what the base is doing. That’s also why we plan around post-storm contractor shortages here – after a hail event, everyone’s booked, and hardscape work that should wait for the ground to settle gets rushed.
Belgard Models & Products We Service in Arlington
We work with the Belgard lines stocked across DFW: Urbana Stone and Catalina Grana pavers, Dublin Cobble and Lafitt Rustic Slab, plus Mega-Arbel and Belair Wall retaining systems and Weston Stone and Bristol Bay caps. Genuine Belgard units are the default for any repair, because matching the existing course and color run is the whole point of a repair that doesn’t show.
We don’t keep a local stock of parts, so every job is sourced through authorized distributors to the specific line and color. Quality aftermarket polymeric sand and geogrid are fine where they outperform – we’re not brand-loyal to the point of using the wrong material.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Arlington
Every price below is a written estimate range, and any change to scope arrives as a written change order before work moves.
| Service | Arlington Price Range |
|---|---|
| Paver Driveway Installation | $7000 – $18000 |
| Paver Patio Installation | $3500 – $11000 |
| Concrete Driveway Installation | $4500 – $12000 |
| Driveway Replacement | $5000 – $14000 |
| Driveway Sealing | $250 – $700 |
What drives the number is base prep more than anything: how deep the clay movement goes, how much field has to be pulled and re-compacted, and whether geogrid is needed behind a wall. A free estimate includes a look at the base, the pattern match, and a line-item quote in writing. Call (888) 590-9867 to schedule yours.
Serving Arlington, TX – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Arlington
Yes, if the base underneath wasn’t built for expansive Blackland Prairie clay, the pavers themselves rarely crack but the field does – courses sink, edges heave, joints wash out. The paver is usually fine. The base is what fails. Call (888) 590-9867 for a look at what’s actually happening under the field; estimates are free.
As soon as the ground has settled for a few days, because post-storm contractor availability in Arlington thins out for weeks and rushed evaluations miss base damage. Pavers usually survive hail better than roofs do, but joint loss and shifted courses show up after the water moves through. Call (888) 590-9867 and we’ll put you on the schedule before the backlog builds.
Often, yes, because the common Belgard lines across DFW are still in production, and genuine Belgard units blend into an existing course and color run far better than a patch of whatever’s on hand. Exact color match depends on the line, the age and how much sun the field has seen. Call (888) 590-9867 and we’ll confirm match options for your specific pavers.
Assume rebuild until someone checks the drainage and geogrid behind it, because a lean almost always means the wall wasn’t built to handle clay pressure, and resetting blocks over a failed base just buys one season. That’s a rebuild-of-section, not a cap-and-patch job. Call (888) 590-9867 for an honest read on which one you’re facing.
Sealing helps against UV fade and slows efflorescence, but it won’t fix a base problem, and sealing a field with active joint loss traps the issue rather than solving it – so we check the base first. Driveway sealing runs $250 – $700 in Arlington depending on square footage and prep. Call (888) 590-9867 to schedule a free estimate.
Service Areas Near Arlington
We serve homeowners across Arlington and the surrounding towns, including Arlington service area neighborhoods, Kennedale, Forest Hill, Richland Hills, Hurst and Bedford. If you’re just outside those lines, call and we’ll tell you straight whether we cover your street.
Book Your Belgard Service in Arlington Today
Whether it’s a paver driveway that’s sinking at the edges or a retaining wall that’s starting to lean, we’ll come look at the base and give you a written estimate. Call (888) 590-9867 to schedule your free estimate in Arlington – a live person answers, day or night.
Written by the team at Barrett & Sons Construction Arlington.