Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Windows & Doors: The Arlington Owner’s Guide
We install and replace Wellborn windows and doors for Arlington homeowners, and most full window replacement jobs run $4,500 to $15,000, with impact-rated units in the $8,000 to $25,000 range. Individual failed components – a sash, a hinge, a balance, a broken pane – cost far less, and we quote those as a written line item once we know your model. Wellborn products aren’t a single system, so the first honest step is identifying exactly what you have before anyone prices a part.
Homeowners usually find the problem the hard way: a window that suddenly won’t stay up in July, a patio door grinding on its track, fog between the glass panes, or a lock that no longer reaches the keeper. In Arlington, the swing between humid summer air and dry winter air works on seals and frames year after year, so the failures tend to show up after a stretch of extreme weather rather than overnight.
Which Wellborn Models This Applies To
Wellborn has built a wide range of window and door lines over the years, and parts are not interchangeable across them. The model or series identifier is usually etched or stickered on the glass edge, inside the jamb, or on the sash channel. Write it down before you call anyone – it saves a wasted trip and it’s the difference between a right part and a wrong one.
Where a label is missing, we identify the unit by measurements and construction: frame depth, sash thickness, hinge style on doors, and whether the window is single-hung, double-hung, casement, or slider. Those measurements tell us the series family far more reliably than a homeowner’s guess.
On the OEM-versus-aftermarket question, our position is simple. For structural and operational parts – hinges, balances, multi-point lock hardware, and door rollers – we lean OEM or a manufacturer-approved equivalent, because the geometry has to match exactly or the part will fail early. For cosmetic trim and weatherstripping, a good aftermarket equivalent is often the smarter buy. We’ll tell you which is which on your quote, in writing, so you can decide.
Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with Wellborn. We work with Wellborn units the same way we work with KraftMaid, Cambria, and Silestone products elsewhere in the home: we install to spec, we pull the permits where they’re required, and we put the price on paper.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Windows & Doors Is Failing
- Window won’t stay open, or slams shut. A worn balance or spiral rod is the usual cause. Once the balance loses tension, the sash becomes a safety problem, especially on upper floors.
- Fogging or condensation between the panes. The seal in the insulated glass unit has failed and moisture has gotten in. It won’t clear on its own, and the glass unit needs replacing, not cleaning.
- Patio or entry door drags and grinds. Rollers, hinges, or the door itself has shifted. Left alone, the drag wears the track and can crack the frame over time.
- Drafty edges in winter. Worn weatherstripping or a failed seal lets Arlington’s cold snaps straight in. You’ll feel it at the jamb before you see it on the energy bill.
- Lock or latch won’t catch. Hardware has worn or the door has settled out of alignment. A lock that doesn’t fully engage is a real security gap, not just an annoyance.
If you notice two or more of these on the same unit, the fix is usually a coordinated parts replacement rather than a string of one-off repairs. We’d rather quote the whole thing once than have you call us back three times.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Arlington homeowners typically see, installed:
- Single failed component (balance, hinge, roller, lock hardware): quoted per unit once the model is confirmed.
- Insulated glass unit replacement: often several hundred dollars per window, depending on size and glass type.
- Full window replacement: $4,500 to $15,000 for a typical home.
- Impact window installation: $8,000 to $25,000.
Every quote is written line by line – parts, labor, and any disposal – so you can see exactly where the money goes. Nothing gets added later without a written change order in your hand first. And every eligible job carries permits pulled and inspections signed, plus our 90-Day Done Right Promise: if it’s not right, Tom comes back and makes it right on one call.
DIY or Call Us?
Some things you can safely check yourself. Look for the model label, clean and lubricate door tracks, tighten visible screws on hinges and handles, and note the measurements of the opening. That’s honest prep work and it helps whoever quotes your job.
What we’d steer you away from: removing and re-tensioning window balances, disassembling multi-point door lock hardware, or replacing an insulated glass unit on an upper floor. Balances are under tension and can snap back hard, and glass units are heavy and unforgiving if a seal is broken on reinstall. It’s the kind of work where a small mistake turns a parts job into a full replacement. Call (888) 590-9867 and we’ll tell you straight which side of that line your unit is on.
FAQs
How long do Wellborn windows and doors last in Arlington?
Glass seals and weatherstripping typically give out well before the frame or glass itself does, and the parts that fail first are the moving ones – balances, hinges, rollers. Texas heat and humidity speed up seal wear, so it’s worth a look at the weatherstripping every few years. Call (888) 590-9867 for a free estimate if you’re unsure what’s failing.
Can the part be repaired instead of replaced?
Often, yes. A failed balance, hinge, or roller is usually a component swap, not a whole-window job, and that’s the cheaper path when the frame and glass are sound. We’ll tell you which route fits once we’ve seen the model. Call (888) 590-9867 and we’ll walk through it – estimates are free.
How long does the swap take?
A single component swap is usually a short visit; a full window or door replacement runs longer and depends on the number of units and whether permits are needed. We give you a realistic time window in writing before we start, not a promise we can’t keep. Call (888) 590-9867 to schedule your free estimate.
How do you source the part for my Wellborn unit?
We identify your model from the label or measurements, then match the part to the series – OEM or approved equivalent for the critical hardware, aftermarket where it makes sense. Everything gets quoted in writing before we order. Call (888) 590-9867 and have your model number handy.
If your Wellborn window or door has stopped doing its job, don’t guess at the part – let us look at it. Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate. We answer the phone with a live person, day or night, and every price change reaches you in writing before the work starts. Ask about our published standing offers, including $40 Off Any Repair Over $200 and a free second opinion on any written estimate you already have.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.