A Barrett company - serving Arlington, TX

Wellborn Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Wellborn Driveway & Pavers: The Arlington Owner’s Guide

If you’re pricing Wellborn driveway and paver work in Arlington, expect roughly $7,000 to $18,000 for a full paver driveway install, and $3,500 to $11,000 for a paver patio, depending on square footage, base prep, and the Wellborn paver profile you choose. We are an independent contractor and are not affiliated with Wellborn. You can call us at (888) 590-9867 for a free written estimate.

Call (888) 590-9867

Most Arlington owners don’t discover a problem with Wellborn pavers all at once. It starts with one line of blocks sinking a half-inch near the street apron, or sand washing out along a joint after a hard rain, or a single cracked paver that keeps catching the mower wheel. By the time the driveway looks wrong, the base underneath has usually been moving for a season.

Key Takeaways

  • Wellborn paver installs in Arlington run $7,000 – $18,000 for driveways and $3,500 – $11,000 for patios.
  • Repairs and spot re-leveling can often be done without a full tear-out.
  • Most paver failures in North Texas trace back to base prep, not the pavers themselves.
  • Written estimates, written change orders, and permits pulled where required.

Which Wellborn Models This Applies To

Wellborn manufactures interlocking concrete pavers in a few standard profiles, and the two most common on Arlington driveways are the 60mm and 80mm thickness lines. The 80mm is what you want for a driveway that sees a truck or an RV. The 60mm is fine for patios and walkways. Where owners get into trouble is buying a 60mm paver to replace a failing 80mm section because the color matched, then having that patch settle differently within a year. Thickness is not a cosmetic detail; it’s the structural spec.

To identify what you have, pull one paver from a corner or an edge where the sand is loose and measure the thickness with a tape. Note the color name on the original invoice if you have it, or match against a Wellborn sample board. Series names vary by region and by batch, so the invoice is the safest reference.

The OEM-versus-aftermarket call for Wellborn matters less than it does for a cabinet hinge or a window sash. Wellborn pavers are a standard spec, and a quality aftermarket paver of the same thickness and chamfer profile will integrate fine. Where OEM is worth it: color-matched replacements on a young driveway where a visible patch would bother you. Where aftermarket is fine: base layers, edge restraints, and polymeric sand, all of which are commodity products.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Wellborn Driveway & Pavers Is Failing

Here’s what Arlington owners actually call us about, in rough order of frequency:

  • Paver settlement along the street apron. The pavers dip toward the curb because the base material got saturated and compacted unevenly. North Texas clay moves seasonally, and that apron is where it shows first.
  • Joint sand washing out. A heavy spring storm pulls the polymeric sand from the joints, and once that happens, the pavers start to shift. Left alone, the failure spreads joint by joint.
  • Hairline cracks in individual pavers. Usually caused by a rock or debris trapped under the paver, or by inadequate base compaction. One cracked paver is a repair. A cracked pattern is a base problem.
  • Weeds in the joints. Not a paver issue; weeds show up where the joint sand has eroded and the paver edges are loose. Regular and thorough joint sand maintenance kills this problem before it starts.
  • Edge restraints pulling away. The paver edge border lifts or separates from the driveway. Once the restraint fails, the pavers spread outward and the whole field loses interlock.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Arlington, here’s what we quote and what it covers:

Work Installed Price Range What’s Included
Paver driveway installation (Wellborn) $7,000 – $18,000 Excavation, base, pavers, edge restraints, polymeric sand
Paver patio installation $3,500 – $11,000 Same as above, patio grade compacted base
Driveway replacement (concrete) $5,000 – $14,000 Demo, base prep, pour, finish
Driveway sealing $250 – $700 Clean, dry, seal

The range is driven mostly by square footage, how much base excavation is needed, whether the existing driveway has to come out, and the paver profile you pick. Base prep is the line item that matters most. A driveway over a poorly compacted base will fail regardless of paver quality. Every estimate we write is a line-item written quote; if something changes mid-job, you get a written change order before we proceed, not after.

All work is backed by our 90-Day Done Right Promise. If something isn’t right, Tom Barrett comes back and fixes it.

DIY or Call Us?

You can safely check some things yourself. Pull a corner paver and measure thickness. Walk the driveway with a level to see where it’s settling. Look at the edge restraints for movement. Sweep sand into joints to see how much is missing. None of that is dangerous.

What you shouldn’t do is re-level a settled section without addressing the base, and we’ll say plainly: a paver re-level that skips base work will settle again within a season. The other thing owners get wrong is compaction. Hand tamping won’t get you within spec. That’s a plate compactor and moisture control job on this North Texas clay. Call (888) 590-9867 to get a free estimate and a second opinion on any written quote you already have.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch