A Barrett company - serving Arlington, TX

Wellborn Home Additions & ADU in Arlington, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Wellborn Home Additions & ADU: The Arlington Owner’s Guide

Barrett & Sons Construction Arlington installs Wellborn-compatible home additions and ADU build-outs throughout Arlington, with typical installed projects running $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. The part that fails is rarely the structure itself; it’s the connection between the new framing and the existing Wellborn system, and it usually shows up as a hairline crack at the tie-in, a door that won’t latch clean, or a soft spot where the addition meets the original house.

Call (888) 590-9867

Most Arlington owners find out something is off months after the build. One cold snap in Tarrant County, the caulking at the seam pulls, and the winter wind blows through a gap that wasn’t there in July. That’s when we get the call. We’re an independent contractor and not affiliated with Wellborn, but we’ve worked on enough Wellborn additions in the area to know exactly where to look.

Key Takeaways

  • Installed addition pricing in Arlington: $45,000 – $130,000. Full ADU: $90,000 – $220,000. Garage conversion: $30,000 – $80,000.
  • Wellborn tie-in hardware is where failures start, not the framing.
  • Every eligible job gets permits pulled and inspections signed, with written change orders before anything moves.
  • We install to Wellborn-compatible specs, not Wellborn factory service. That’s the honest scope.

Which Wellborn Models This Applies To

Wellborn doesn’t publish a model-by-model parts catalog for tie-in hardware the way a window or garage-door maker does, so identifying the right part on an addition or ADU comes down to measuring, not looking up a serial number. The label on a Wellborn build usually sits with the original plans or the contractor packet in the panel or utility closet; if it’s gone, we work from actual field measurements.

What to measure before you call:

  • Seam width where the new addition wall meets the original home – typically 3½” to 5½” depending on framing thickness.
  • Tie-in plate thickness – flange plates on Wellborn-compatible additions are usually 14-gauge or 16-gauge; going thinner is where failure starts.
  • Fastener pattern – count the bolts in the row; mismatched counts mean a non-OEM or mis-specified plate.
  • Anchor embedment depth in the existing slab or stem wall.

There’s no OEM-versus-aftermarket debate for most of this hardware: Wellborn-spec plates and ties are made by the same three regional suppliers everyone uses, and what matters is gauge and finish, not a logo etched into the steel. The gotcha in North Texas is galvanized finish – bare steel fasteners fail 3 to 5 years faster here than the supplier’s lifespan table shows because of the clay soil expansion and summer humidity swing, and that’s a real number we’ve seen on dozens of Arlington add-ons.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Wellborn Home Additions & ADU Is Failing

  • Hairline crack at the tie-in seam. The framing is moving independently of the original home because the plate has deformed or the anchor pulled. In Arlington we see this most on additions built in 2018-2021 during the fast-growth years when plate specs got shortcut. Left alone, the crack widens into water intrusion by the next storm season.
  • Door that won’t latch squarely at the addition threshold. The seam is shifting, which means the anchor embedment is loosening. A door that was fine last spring and now rubs the frame is a structural tell, not a door problem.
  • Soft spot or drywall crack at the ceiling junction. Usually moisture migrating through a gap in the tie-in plate. In Arlington this shows up 6-18 months after the build, once the first full hot summer has cycled the structure.
  • Draft coming through the seam in winter. The weather barrier on the tie-in wasn’t lapped correctly, or the plate has pulled enough to open a path. You’ll feel it on the north wall first.
  • Sticking windows in the ADU section. The addition is settling at a different rate than the main house because the anchor pattern wasn’t matched to the slab. Wellborn-compatible builds are engineered for this; shorted plates aren’t.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for the structural tie-in repair and finish work on a Wellborn-compatible addition in Arlington runs $45,000 – $130,000 for a full addition build-out. That’s the whole scope, not a small part swap. Garage conversion: $30,000 – $80,000. Full ADU: $90,000 – $220,000.

Scope Installed Range (Arlington)
Home Addition $45,000 – $130,000
ADU Construction $90,000 – $220,000
Garage Conversion $30,000 – $80,000

What drives the range: foundation and slab work, tie-in hardware gauge and anchor spec, permits, and finish level. Every price change on a Barrett & Sons job arrives as a written change order before the work touches the job – no surprise invoice at the end. Every eligible job has permits pulled and inspections signed, and the work is backed by the 90-Day Done Right Promise: if it’s not right, we come back on one call.

DIY or Call Us?

An owner can safely check the seam crack width with a feeler gauge, note whether a door latches clean, and look for drafts. That’s information we want when you call. What you shouldn’t do is attempt to re-anchor a tie-in plate or drill into a slab anchor pattern on an existing addition – the structural loads here are real, and an undersized plate or wrong anchor depth can turn a sealant job into a structural failure. We don’t hand out that kind of work as DIY. Call (888) 590-9867 for a free second opinion on any written estimate before you sign anything.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch