Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Driveway & Pavers: The Arlington Owner’s Guide
We handle Cambria driveway and paver projects in Arlington, from a full paver driveway to a single failed section, and a complete paver driveway installation here typically runs $7,000 to $18,000 depending on square footage, base prep, and border detail. If you already have Cambria hardscape down and something has gone wrong, most owners spot it the same way: a low corner that holds water after a storm, a paver that rocks underfoot, or joints that keep flushing sand no matter how many times they get refilled. Call (888) 590-9867 and we can talk through what you’re seeing before anyone comes out.
North Texas does hardscape no favors. Clay-heavy soil in this part of Arlington swells and shrinks with every wet-dry cycle, and the sun bakes the surface between rains. That movement is what kills a lot of paver work that looked perfect on install day.
Key Takeaways
- Full paver driveway installs in Arlington usually land between $7,000 and $18,000.
- Most Cambria hardscape failures trace back to base prep and drainage, not the pavers themselves.
- We’re an independent provider and not affiliated with Cambria, but we install their hardscape products and match them to what’s already on your property.
- Every price change arrives in writing before work starts.
Which Cambria Models This Applies To
Cambria’s line covers both natural stone pavers and manufactured hardscape units, and the part-shopping process works differently depending on which one you have. Before ordering anything, get the actual dimensions off a loose paver or an edge unit: length, width, thickness, and color name. Cambria sheets its own color names, and a “gray” from one line is not the same gray from another. If the color name isn’t printed anywhere on your paperwork, a phone photo in daylight on a flat surface is the next best thing.
The compatibility gotcha that bites people: a replacement paver in the same color can still stand out if it comes from a different production run. Dye lots shift slightly, and a fresh paver next to a sun-faded one two years old will look different, especially in direct afternoon sun. That’s why we try to source replacements for repairs as close to your original batch as possible, and why a full section replacement usually looks better than a spot patch if the color won’t match.
The OEM-versus-aftermarket decision matters here too. Genuine Cambria units keep thickness and edge profiles consistent with what’s already bedded in. A cheaper aftermarket lookalike may measure a few millimeters off, and if it’s thicker, you won’t get it flush without resetting its neighbors. For repairs next to existing Cambria, we lean genuine. For a brand-new install where nothing has to match, there’s more room to talk options. We also install KraftMaid, Silestone, and Kohler in other parts of the home if you’re working through a bigger project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Driveway & Pavers Is Failing
- Paver rocking underfoot or a hollow sound when you tap it. The bedding sand has washed out or the base has settled underneath. One rocking paver usually means a few more nearby are heading the same way, because they share the same failed layer.
- Joint sand that won’t stay put. If you’re sweeping sand back into the joints every few months, the drainage under the pavers is likely moving water through them rather than away. It’s a symptom of what’s happening below, not a sand problem.
- Standing water or a low spot after rain. A paver driveway should shed water toward the street or a drainage point. A puddle that sits for a day after a storm means the base has lost its slope.
- Heaved or uneven surface along a tree root or utility line. This is very common in older Arlington neighborhoods where a mature tree sits near the drive. Roots push, pavers lift, joints open, and water gets an easy path down.
- Chipped edges and spalling on the surface. Freeze-thaw cycles in a Texas winter will pop the face off a paver that already has a hairline crack. Once that starts, patching delays the inevitable, and it’s cheaper to replace that run of units than to watch it spread.
Replacement Cost & What’s Included
Here’s the honest price picture for Arlington, line-item, so you can compare quotes apples to apples. These are installed ranges covering materials, base prep, and labor:
| Project | Installed Range |
|---|---|
| Paver driveway installation (Cambria or equivalent) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What pushes the number toward the top of the range: total square footage, how much of the existing base has to be dug out and rebuilt, border or soldier-course detail, and whether drainage work (a channel drain, a regraded swale) is part of the fix. A repair to one settled section costs far less than a full replacement and often buys you years.
Every price change comes to you as a written change order before we touch anything, so a surprise under the pavers doesn’t turn into a surprise on the invoice. Every completed job is backed by our 90-Day Done Right Promise, written into the contract, not buried in fine print.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do the checking yourself. Walk the drive after a hard rain and mark where water pools. Tap each paver with a screwdriver handle and listen for hollow spots. Pull one loose unit and look at the layer beneath: if the sand is washed out or the base is soft and wet, that’s your answer. None of that involves lifting more than a single paver or digging.
Rebuilding the base under a driveway section is where DIY goes wrong. Getting the excavation depth right, compacting in lifts, re-establishing the slope toward drainage, and setting the pavers so the joints stay tight takes the right compaction equipment and an eye for grade. A driveway that drains wrong doesn’t show it until the next big storm, and by then you’ve already paid for the pavers. It’s also real physical work on a stone surface in the Texas heat, so pace yourself if you decide to try anyway.
If you’ve found soft base and open joints, that’s the point to bring someone out. Call (888) 590-9867 and we’ll walk it with you. Our crew members carry up to 28 years of experience on hardscape work, and they show up background-checked and in uniform.
FAQs
A properly installed Cambria paver driveway should last 25 to 50 years, and failures before then almost always come from the base, not the stone. In Arlington’s clay soil, drainage is the deciding factor: a driveway that sheds water correctly holds up for decades, while one that traps moisture in the base will start settling within a handful of years. Call (888) 590-9867 for an exact quote on your project.
Yes, a single settled or rocking section can often be lifted, the base rebuilt, and the same pavers reset, which costs a fraction of a full replacement. Repair works best when the failure is isolated and the drainage issue that caused it is fixed at the same time. If the water problem isn’t addressed, the repaired section will just fail again. Call (888) 590-9867 to find out whether a repair makes sense for your drive.
A small repair, one section or a few reset pavers, usually finishes in a single day, while a full paver driveway installation takes several days to about a week depending on square footage, base depth, and weather. We build the schedule into the written scope before work starts so there are no surprises. Call (888) 590-9867 for a timeline that fits your project.
We source replacements using your color name and dimensions, and we try to get as close to your original production run as possible, though dye-lot shift means a new paver may read slightly different next to sun-aged ones. When the color gap is too wide, we’ll tell you honestly and recommend a full-section replacement so the result looks consistent. Call (888) 590-9867 to talk through matching options.
Talk It Through With Us
If a Cambria paver driveway or patio in Arlington has started to rock, puddle, or push up at the joints, the smart move is to look before you spend. We’ll walk the drive with you, put the scope and every allowance in writing, pull permits where they apply, and issue any price change as a written change order before work moves forward. Barrett & Sons Construction is family-run and owner-operated, with Tom Barrett and his sons on-site most days, and a live person answers the phone around the clock, not a call center.
Call (888) 590-9867 to schedule your free estimate. Ask about our standing offers: $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, and No Trip Charge Inside the County, plus a permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.