Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Caesarstone Home Additions & ADU: The Arlington Owner’s Guide
We build and finish home additions and ADUs in Arlington that use Caesarstone quartz surfaces where they belong: kitchenettes, island tops, vanity counters, laundry folding stations, and exterior bar tops in covered patios. Additions in Arlington run $45,000-$130,000 depending on square footage and how much plumbing moves, and a stand-alone ADU runs $90,000-$220,000. Most of this work is planned, permitted, and inspected, so we schedule it like the real construction job it is rather than promising a same-day install.
Owners usually find trouble in one of two ways. Either the Caesarstone top in their finished addition chips at the sink edge, or a slab seam lifts near the range because the cabinet run under it wasn’t shimmed flat. Both look like stone failures and usually turn out to be framing or install problems underneath. That distinction is what this page is about.
Key Takeaways
- Caesarstone quartz is manufactured stone, not natural slab – it can’t be re-polished at a chipped edge the way granite can.
- Most “failed” counters in Arlington additions trace back to cabinet deflection or a bad seam, not the stone itself.
- Full additions in Arlington: $45,000-$130,000. Detached or garage-conversion ADUs: $90,000-$220,000.
- Every job gets permits pulled and inspections signed, with a written change order before any scope moves.
Which Caesarstone Models This Applies To
Caesarstone doesn’t build addition parts – it supplies quartz surfacing in a few standard thicknesses and classifies its colors into collections. The relevant distinctions for a Texas addition are the 2cm (3/4-inch) and 3cm (1-1/8-inch) thicknesses and the edge profiles. Island tops and bar tops over a knee wall want 3cm; a low-traffic laundry counter in a 2cm slab needs a plywood substrate underneath or it will flex over time. Any slab that sits near an exterior door in Arlington needs to be rated for the temperature swing that comes with our summers, and a solid-color Caesarstone is more forgiving there than a heavily veined pattern with a thin facing.
To identify what you actually have, look at the sticker on the underside of the slab or the fabricator’s stamp near a sink cutout. If neither is there, measure the edge thickness: about 3/4 inch is 2cm, about 1-1/8 inch is 3cm. For the OEM-versus-aftermarket question, Caesarstone quartz itself is always Caesarstone – there’s no aftermarket equivalent that matches a specific colorway, so any replacement slab has to come through an authorized Caesarstone fabricator in the Dallas-Fort Worth area. The edge profile, however, can be matched locally by any shop with the right tooling. When a top is being replaced, we often price Cambria or Silestone alongside the Caesarstone number so you can see the comparison before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Caesarstone Home Additions & ADU Is Failing
- A chip at the sink or cooktop edge. Caesarstone is dense and chips cleanly rather than crumbling, which means a repair is a visible patch unless a fabricator cuts it back. Chips at cutouts are almost always from a tight radius that left too little material around the opening.
- A seam that reads as a dark line or feels raised under your fingertip. Seams in quartz fail when the two pieces weren’t leveled before the epoxy set. In Arlington’s heat, a seam near a south-facing window will telegraph any movement in the base cabinets within a couple of years.
- Deflection when you press on a counter. If a counter in a new addition gives even slightly, the cabinet run or substrate underneath is the problem. Quartz won’t bend, so eventually it cracks instead – often right over an undermount sink.
- Ring stains or a dull patch that won’t clean out. Quartz is non-porous, so a stain that survives normal cleaning usually means resin damage from heat – a hot pan set down on the surface, or a slow cooker run for a full day in a finished ADU kitchenette.
- Separation at the wall or backsplash joint. A visible caulk line in an addition is often normal settling in the first year, but if it opens, re-caulks, and opens again, the framing over the window header is worth inspecting.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Replacing a Caesarstone top as part of a larger addition scope can’t be priced alone – it lives inside the job. Here’s what the surrounding work runs in Arlington, and where a Caesarstone component fits inside each number.
| Scope | Installed range (Arlington) | Where Caesarstone sits |
|---|---|---|
| Home addition (full build) | $45,000-$130,000 | Island, kitchenette, or bar top as part of the finish package |
| ADU construction | $90,000-$220,000 | Full kitchen and bath surfacing |
| Garage conversion | $30,000-$80,000 | Kitchenette top plus vanity |
| Countertop installation (standalone) | $2,000-$6,500 | Fabrication, template, delivery, install |
| Kitchen island installation | $3,000-$10,000 | Base cabinet, substrate, Caesarstone top, edge |
| Bathroom vanity installation | $800-$3,000 | Vanity plus quartz top with cutout |
What drives the range in Arlington is square footage, how far plumbing and electrical have to travel, and whether the addition touches the original roofline. Every allowance and every change gets written down before work moves, so the number on the contract is the number at the end. All our construction work carries the written 90-Day Done Right Promise: if something isn’t right, one call brings us back.
DIY or Call Us?
You can safely handle the small stuff. Measure the thickness, photograph the sticker under the slab, check for deflection by pressing firmly on the counter at a few points, and note whether a seam feels raised to the touch. That information alone often tells a fabricator whether they’re looking at a stone issue or a cabinet issue.
What you shouldn’t do is try to re-set a seam, cut back a chipped edge, or lift a quartz top on your own. Quartz slabs are heavy, they crack without warning, and an undermount sink hung beneath one adds real weight; a two-person lift is a job for a crew with the right suction cups and the right insurance. The counter connections in an Arlington addition also sit close to plumbing and gas lines in some layouts, and that’s not a place to learn by doing. Call us at (888) 590-9867 and we’ll take a look.
FAQs
Twenty years or more if the substrate under it was built right, and considerably less if it wasn’t. The quartz itself doesn’t fail from weather in Arlington – what fails is the cabinet run, the seams, or the cutout edges. A properly supported island top installed over a flat, shimmed cabinet base outlasts the cabinets underneath it.
Sometimes, but not the way granite can be. A chip can be filled and color-matched, and a lifted seam can be cut out and re-epoxied by a fabricator. A crack that runs through the slab at a sink cutout usually can’t be fixed with any confidence, and a heat-damaged patch can’t be polished out. We’ll tell you honestly whether repair is worth your money or whether a replacement slab is the better call. Call (888) 590-9867 for a free estimate and a straight answer.
Three to seven days from template to install for a standard counter, and longer if the slab has to be ordered in a specific Caesarstone colorway. Template day, fabrication, and install day are separate visits. We’ll give you the sequence in writing before we start so you know when your kitchen or addition is going to be out of service.
Through authorized Dallas-Fort Worth Caesarstone fabricators, not off a truck. That’s the only reliable way to get a genuine Caesarstone slab that matches your colorway. When we quote, we list the Caesarstone fabrication and install separately from the addition framing and finish so you can see exactly what the surfacing costs. We’ll pull permits and sign the inspections on the addition itself, and we’ll show you Cambria or Silestone pricing if you want a side-by-side before you choose. Barrett & Sons Construction Arlington is an independent general contractor, not affiliated with Caesarstone.
If you’re planning an addition or ADU in Arlington and want the Caesarstone surfaces done right the first time, call (888) 590-9867 for a free estimate. We’ll put the scope, the allowances, and every change order in writing, pull the permits, and stand behind the work.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.