Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Kitchen Remodeling: The Arlington Owner’s Guide
Quick answer: Moen doesn’t manufacture kitchen remodeling itself, so what Arlington owners actually call us about is a Moen kitchen faucet or filtration line that’s failed mid-remodel, and the fixture work that goes with the project. Kitchen remodeling in Arlington runs $14,000 – $45,000 installed, with small kitchens at $9,000 – $20,000 and faucet-and-accessory swaps bundled in. Same-day availability depends on the crew schedule, so call early.
The way most owners in Arlington find out a Moen fixture has failed is simple: the faucet that worked fine in the old kitchen suddenly drips onto new quartz, or the pull-down sprayer quits after the cabinet swap, or the filtration cartridge housing cracks the week you’re trying to get the countertop templated. You don’t want to live with a leaking fixture through a five-figure remodel. We’re an independent contractor and not affiliated with Moen, but we install Moen-compatible fixtures, faucets, and accessories as part of full kitchen remodeling across Arlington. We pull permits, we put every allowance in writing, and every price change comes as a written change order before work moves.
Which Moen Models This Applies To
Moen kitchen faucets and filtration systems use fairly predictable connection standards, which matters when you’re swapping a fixture during a remodel rather than replacing the whole kitchen. Most single-handle kitchen faucets use a 3/8-inch compression supply connection and a standard 1-3/8-inch deck hole, so most new Moen faucets drop into an existing hole without drilling. The fit variable that trips people up is the pull-down or pull-out sprayer hose routing: some models need more under-sink clearance than a shallow sink base cabinet allows, especially if you’re adding a garbage disposal. Measure before you buy.
To identify your Moen model, look for the sticker under the faucet base or engraved on the back of the body, then match the number to the parts diagram. For kitchen filtration systems, Moen’s under-sink housings and their cartridges are series-specific; a cartridge from a different series often looks close but won’t seal, which is the most common compatibility headache we see in Arlington. On the OEM-versus-aftermarket call, we lean OEM on any sealing or cartridge component, because aftermarket rubber compounds don’t always hold up in the heat and humidity swings of North Texas summers. On cosmetic items like spray head caps, a quality equivalent is fine.
What we handle alongside the fixture: KraftMaid cabinetry, Cambria and Silestone countertops, plus the plumbing rough-in, disposal, and lighting that come with a real remodel. The Moen fixture is one piece of a larger scope, and we treat it that way.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Kitchen Remodeling Is Failing
- Drip from the spout when the handle is off. That’s almost always a worn cartridge seal. In Arlington’s hard water, mineral buildup speeds up the wear, and what looks like a slow drip becomes a puddle under the sink within a month.
- Handle feels stiff or climbs back. A sticky cartridge or a failing stem. Hard-water scale is the usual cause, and it wears the moving parts faster than most homeowners expect.
- Sprayer loses pressure or leaks at the head. A cracked diverter or a worn seat. On pull-down models, we often find the hose ferrule has given out behind the sink base where you can’t see it.
- Filtration cartridge housing cracks or the flow drops. Aging O-rings and heat cycling. In Arlington kitchens that face west, afternoon sun through the window pushes the under-sink temperature up enough to speed that wear.
- Base of the faucet rocks loose or leaks onto the countertop. A failed mounting gasket or a stripped mounting nut. Left alone, it can rot the cabinet deck under the sink.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full kitchen remodeling in Arlington runs $14,000 – $45,000. Small kitchen remodels run $9,000 – $20,000. Cabinet installation alone is $4,000 – $13,000, countertop installation is $2,000 – $6,500, backsplash installation is $800 – $2,500, and a kitchen island is $3,000 – $10,000. A Moen faucet or filtration swap on top of that is minor fixture labor, and it’s folded into the larger scope, not billed separately. Here’s what drives the spread:
- Cabinet quality and layout changes – KraftMaid lines, custom sizes, and moving a sink base cost more than a like-for-like swap.
- Countertop stone – Cambria and Silestone price differently by color and edge profile.
- Plumbing rough-in changes – relocating a Moen faucet or filter line adds labor, and it needs a permit in the City of Arlington.
- Electrical work – adding under-cabinet lighting or a disposal circuit.
Every line is quoted in writing, and the parts and labor are itemized. Every price change requires a written change order before it happens. Finished jobs carry our 90-Day Done Right Promise – if something’s not right, one call brings it back to us at no charge. We pull the permits on every eligible job and pass the inspections.
DIY or Call Us?
Faucet and filtration swaps aren’t dangerous the way garage-door springs or electrical panels are, but plumbing mistakes get expensive fast. You can safely open the under-sink shutoff valves, check the supply line connections, and look up your Moen model number on the base. If the ceramic cartridge is seized, the supply fittings are corroded, or the sink base cabinet deck has begun to soften from a slow leak, stop and call us. Cross-threading a supply line under a new countertop can cost more to fix than the fixture did.
A few things you can do yourself: shut off the supply valves if you have a leak, take photos of the model sticker and the under-sink layout, and measure the deck hole and under-sink clearance for the replacement. If the swap is part of a larger kitchen remodel in Arlington, handle it once, with the permits and inspections already in place. Call (888) 590-9867 and we’ll talk through the scope. Live person answers, day or night.
FAQs
Five to seven years for a standard Moen kitchen faucet in Arlington’s water, and often less for the filtration cartridge housing if it faces summer heat. Hard water is the main variable, and North Texas water runs harder than many owners expect, so cartridge seals wear out faster here than in cooler, softer-water climates. If your faucet is more than five years old and the whole kitchen is coming out, replace it during the remodel. Call (888) 590-9867 to fold it into the job.
Yes, if the body is sound. Most Moen faucet failures are cartridge, O-ring, or sprayer-diverter issues and those parts are available. Replacement is the better call if the faucet is over seven years old, the plating is pitted, or you’re already remodeling the kitchen. We’ll tell you honestly which applies when we assess the scope. Call (888) 590-9867 for a free estimate.
A Moen faucet swap takes roughly one to two hours once the countertop is in and the plumbing is accessible, and the filtration system install is similar. The real timeline driver is the kitchen remodel itself; a small Arlington kitchen runs two to four weeks, a full remodel four to eight. We schedule the fixture work last, after the countertop and backsplash are done, so nothing gets damaged. Call (888) 590-9867 for a written timeline.
We read the model number off the faucet base or filtration housing, match it to the current Moen parts listing, and confirm the connection spec and under-sink clearance before ordering. That step saves the wrong-fit headache that hits a lot of owners who buy online by appearance. Every part is itemized on the written quote before we order anything. Call (888) 590-9867 and we’ll source it accurately the first time.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.