Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Fence Installation: The Arlington Owner’s Guide
Moen fence installation in Arlington typically runs $3,500 to $9,000 installed, depending on linear footage, fence height, material, and gate count. We install Moen-compatible fencing for homeowners across Arlington and the surrounding counties. Because we’re an independent service provider and not affiliated with Moen, we match the right product to your property instead of pushing one series.
Here’s how most Arlington owners end up reading this page: a gate starts dragging, a post leans after a wet spring, or a panel bows and won’t latch. They search their hardware, find a Moen label on a gate kit or post bracket, and want to know what’s actually failing before they spend a dime.
Which Moen Models This Applies To
Moen’s residential outdoor line covers gate kits, post-mount hinges, latches, and panel brackets sold for homeowner installs. If your hardware carries a Moen nameplate, the first move is finding the model stamp. Look on the inside face of the gate frame, the underside of the hinge plate, or the post bracket where it meets the wood. Many Moen kits print a series code and a specification line, usually post size (4×4 vs. 6×6 brackets differ) and a rail spacing dimension.
Measure before you trust the label. Rail spacing on Moen kits commonly runs in a few fixed ranges, and a bracket cut for one spacing won’t seat on another. Photograph the stamp and measure the gap between rails to the nearest 1/16 inch. That single measurement is the difference between a correct replacement and a second trip to the store.
On OEM versus aftermarket: Moen replacement hardware is worth the match when your existing posts and rails are intact and you’re swapping a failing hinge, latch, or bracket. When the whole run is going in, the brand of bracket matters less than footing depth, material quality, and how the posts are set in our local soil. We also carry KraftMaid, Cambria, and Silestone for clients doing interior work alongside a fence project, though those trades don’t touch the fence itself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Fence Installation Is Failing
Here’s what Arlington owners report, and what’s usually behind each one.
- A gate that drags on the ground. The hinge has worn its pin, or the post has shifted in clay soil after a heavy rain. Dragging gates stress every other fastener on the run.
- A leaning or wobbling post. Usually a footing that’s too shallow or wasn’t set with proper gravel drainage. North Texas clay swells when wet and shrinks when dry, and a shallow post pays for it.
- A latch that won’t catch. Either the gate has sagged out of alignment or the latch mechanism has worn internally. The latch is the symptom; the alignment is often the cause.
- Panels that bow or separate from the rail. Brackets loosen, or the wood has absorbed moisture and expanded across a wet spring. Look for pulled fasteners and gaps at the rail joint.
- Rust streaks or corrosion at the hardware. Common on gate kits that face west and take full afternoon sun. Corrosion at the hinge point signals the metal is near the end of its service life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Replacing a Moen-compatible fence installation in Arlington lands between $3,500 and $9,000 installed. What moves the number:
| Scope | Typical Installed Range |
|---|---|
| Vinyl fence installation | $3,500 – $9,000 |
| Aluminum fence installation | $4,000 – $10,000 |
| Hardware-only replacement (hinges, latch, brackets) | Quoted after inspection |
Linear footage drives most of the range, then height, gate count, and whether old posts come out clean or fight you. You get parts and labor broken out as line items, a written change order if the scope shifts once we’re on site, and permits pulled where the job requires it. Every completed install carries our written 90-Day Done Right Promise. We don’t carry parts on a truck and we don’t claim to stock Moen hardware locally, so we quote the part from your model number and measurements before we order.
DIY or Call Us?
What you can safely check yourself: photograph the model stamp, measure rail spacing and post size, and tighten visible fasteners to see if a gate simply needs an adjustment. That costs nothing and often tells you whether you’re replacing hardware or a whole run.
Where DIY goes wrong: setting new posts. Fence footings in Arlington have to go below the frost line and get proper drainage, because a shallow post in swelling clay will lean again by the next wet season, no matter how good the bracket is. Digging by hand into limestone and caliche is its own headache. And pulling a gate that’s under load can drop it on you if the hinges fail mid-removal. If you’re past the inspection stage, call (888) 590-9867 and we’ll look at it before you spend on the wrong part.
FAQs
Expect 10 to 15 years on a quality install with hardware checked every few years, and shorter on gates that face full afternoon sun. North Texas heat and clay soil are harder on posts and hinges than the hardware spec sheets account for, so annual tightening pays off.
Often, yes. A worn hinge, latch, or bracket is a hardware swap, and a single leaning post can usually be reset. If posts, rails, and footings are sound, repair is the cheaper call. Call (888) 590-9867 and we’ll tell you which one you’re facing – the estimate is free.
A hardware-only swap runs a few hours. A full fence replacement typically takes one to three days depending on footage and gate count. We schedule around weather and won’t promise a finish date we can’t hold.
We match from your model stamp and on-site measurements rather than guessing. You get the part specification in writing before we order. If the exact Moen replacement isn’t available, we’ll quote a quality equivalent and tell you plainly where it differs.
Arlington homeowners know the drill with national outfits that quote one price on the phone and hand you a different bill at the door. Barrett & Sons Construction is the alternative: scope in writing, every price change in writing before work starts, and a name and address you can look up. Call (888) 590-9867 for a free estimate on your Moen fence installation in Arlington.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.