A Barrett company - serving Arlington, TX

Blanco Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Blanco Driveway & Pavers: The Arlington Owner’s Guide

We install and repair Blanco driveway and paver systems in Arlington, and a full paver driveway typically runs $7,000 – $18,000 installed depending on square footage, base prep, and paver pattern. We’re an independent local contractor, not affiliated with Blanco, and our crew members have up to 28 years of experience with hardscapes across Tarrant County.

Call (888) 590-9867

Most Arlington owners don’t wake up thinking about pavers. They notice it after a hard rain when water pools against the garage door instead of running off. Or a paver lifts near the driveway apron where the concrete meets the street. Or a joint opens up wide enough to catch a shoe heel. By the time an owner calls us, the pattern has usually been shifting for a season or two, and what looks like one failed paver is really the base underneath finally giving up.

Key Takeaways

  • Blanco paver driveways in Arlington generally run $7,000 – $18,000; concrete alternatives run $4,500 – $12,000.
  • Most “failed paver” calls trace back to base prep and drainage, not the pavers themselves.
  • We pull permits and sign inspections on every eligible hardscape job in Arlington.
  • Our 90-Day Done Right Promise is written on the contract, not buried in fine print.

Which Blanco Models This Applies To

Blanco manufactures driveway and paver systems across several product lines, and the part number you need depends on which line was installed at your Arlington property. The most reliable way to identify yours is to pull one loose or lifted paver from a corner or the apron and look at the underside. Blanco stamps a model code and often a batch number on the back face. That code tells us the series, thickness, and color run so the replacement matches the existing field.

For a full driveway replacement, matching matters less because everything comes up at once. For a repair or a small extension, matching matters a lot. A 2-3/8-inch paver won’t sit flush against a 2-1/4-inch field, and a color lot that’s two years fresher will read a few shades lighter in the Arlington sun even if the color name is identical. We measure the thickness with a caliper before we order, not after.

On the OEM-versus-aftermarket question: Blanco’s own replacement pavers are the surest match for color and dimension. Quality aftermarket equivalents from Belgard and Techo-Bloc can work well and often cost less, but only when the thickness and color family line up. We don’t carry parts on a truck and we don’t stock pavers locally. Every piece gets ordered to the specific Blanco model on your property, and we’ll show you the spec sheet before you commit so there are no surprises.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Blanco Driveway & Pavers Is Failing

Five things we hear from Arlington homeowners, and what each one usually means:

  • Pavers rocking or lifting when you walk on them. That’s almost always a base failure, not a paver problem. Water has worked under the surface and washed out the compacted base, so the sand layer no longer supports the load. Replacing the top paver without fixing the base buys you a few months at best.
  • Widening joints between pavers. Polymeric sand has washed out or the pavers have shifted apart. In Arlington, spring rain and midsummer heat cycling through the clay soil expands and contracts the base faster than a thin sand joint can flex, so the joints open up.
  • Weeds coming up through the field. Weeds root in the joint sand, which means the sand has thinned or failed. A spot weed or two is normal; a field of them across the whole driveway means the joint material needs to be redone with proper polymeric sand, not just spot-cleaned.
  • Standing water or pooling near the garage or street. This is the drainage sign, and it’s the one that does the most damage over time. The driveway has settled or the slope has changed, and water now sits on the pavers instead of running off. Every season it sits, the base under it gets weaker.
  • Cracked or chipped pavers along the apron or the turn. That’s impact and point-load damage from vehicles turning in. The paver itself failed, not the base, so a matching replacement is usually the right fix, assuming you can source the same Blanco model and color lot.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed price ranges for Arlington hardscape work, parts and labor included:

Service Typical Installed Range
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement $5,000 – $14,000
Paver patio installation $3,500 – $11,000
Driveway sealing $250 – $700

What drives the range on a Blanco paver driveway: square footage, how much base excavation is needed, whether the old surface comes out, drainage corrections, and whether we’re matching an existing Blanco field or starting fresh. We quote parts and labor separately on the line-item sheet so you can see exactly what the pavers cost and what the install costs. Every price change arrives as a written change order before any work starts. And every eligible job includes permits pulled and inspections signed. The whole thing is backed by the written 90-Day Done Right Promise.

DIY or Call Us?

You can safely pull a loose paver, read the model code on the back, and measure the thickness. You can sweep joint sand back in if it’s just thinned out. You can eyeball where water pools after a rain and note it. That’s the useful part of DIY.

Where it goes wrong: setting or resetting pavers without rebuilding the base underneath. A paver driveway rests on a compacted aggregate base and a bedding layer, and if the base has washed out, tapping the paver back down just hides the problem for one rainy season. On top of that, ordering the wrong thickness or color lot means a visible mismatch in the middle of your driveway. If the paver comes up and the base under it is soft, wet, or loose, that’s the line where we’d rather you call. We’d rather tell you honestly that it’s a base repair than have you spend a weekend on a fix that won’t hold.

Call (888) 590-9867 and we’ll look at the driveway and give you a straight answer on what actually needs to happen.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch