Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Home Additions & ADU: The Arlington Owner’s Guide
Blanco doesn’t manufacture home additions or ADUs, so there’s no Blanco-branded part to swap here. Blanco is a sink and faucet brand, and its role in an Arlington addition is at the wet bar, kitchenette, laundry, or outdoor kitchen you’re adding. If you’ve got a Blanco sink or faucet going into a new space, we build the addition around it and connect the plumbing to match.
Where this page gets real use: homeowners in Arlington planning a home addition or ADU who already own a Blanco fixture they want built in, or who are specifying one now. The core question is whether the rough-in can carry a Blanco sink and faucet properly within the footprint you’re adding. That’s a scope decision, not a parts swap, and it changes the framing, plumbing, and inspection sequence of the job.
- Key takeaway: Blanco fixtures work in additions; Blanco does not make structural parts.
- Typical addition cost in Arlington: $45,000 – $130,000.
- Typical ADU cost in Arlington: $90,000 – $220,000.
- Permits: required on every eligible addition and ADU in Arlington; we pull them and get the inspections signed.
We’re Barrett & Sons Construction Arlington. We’re an independent builder, not affiliated with Blanco. We install Blanco fixtures as part of the additions and ADUs we build across Arlington and the surrounding towns.
Which Blanco Models This Applies To
When a Blanco sink or faucet is going into an addition, the model line matters for the rough-in, not for the structure. Blanco’s sink lines include the Ikon, Precis, Diamond, Valea, and the undermount Formera and Quatrus families. Faucet lines include the Liven, Empressa, Sonus, and Urbena. Which one you have decides the cutout dimension, the basin depth, and the drain position, and those decide where the cabinet and plumbing rough-in land before drywall goes up.
How to identify your Blanco fixture:
- Look on the underside or back rim of the sink for the stamped model number.
- Measure the outer sink dimensions and the basin depth before you commit to a cabinet run.
- On a faucet, check the deck plate width and the spout reach; a Blanco Liven with a pull-down sprayer needs clearance behind the basin.
OEM vs. aftermarket here means something different than it does for a repair part. There’s no “Blanco-compatible addition.” What you’re really choosing is whether your builder will install the Blanco fixture you have or substitute a house brand. We install what you specify, and we note it on the scope so the fixture doesn’t quietly change between the estimate and the install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Home Additions & ADU Is Failing
If you’re adding a wet bar, kitchenette, or outdoor kitchen with a Blanco fixture, the signals that the plan or the build is going wrong show up in specific places:
- Sink depth vs. cabinet depth mismatch. A deep Blanco Precis or Ikon basin doesn’t fit a shallow vanity cabinet. The cabinet has to be sized to the sink, not the other way around, and that gets decided at the framing stage.
- Drain position doesn’t line up with the slab or subfloor rough-in. On a slab foundation, which is common in Arlington, moving a drain after the fact means cutting concrete. Get the Blanco sink specs in hand before the plumbing layout is set.
- Faucet clearance is short. A tall Blanco pull-down or a wide-spread faucet too close to the backsplash or a window makes for a cramped, awkward addition. Clearance needs to be measured, not guessed.
- Water supply and drain stub-out heights are off. Arkansas and OEM spec sheets list stub-out heights for a reason. Off by a few inches and the P-trap won’t align, forcing an ugly and code-questionable fix.
- Outdoor kitchen faucet spec doesn’t match the climate. Arlington summers and occasional freezes stress an exterior faucet. A Blanco fixture rated for outdoor exposure at the outdoor kitchen is different from one rated for indoor wet-bar use.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Because Blanco doesn’t make structural parts, the “replacement cost” here is the addition or ADU itself. In Arlington, here’s what that ranges to:
| Scope | Typical installed cost (Arlington) |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: the footprint and foundation, whether it’s a slab or pier buildup (Arlington has both), the plumbing and electrical runs to your Blanco fixture, and the finish level. Your Blanco sink and faucet are a line item on the scope, listed at cost, with no markup hidden in the total. We hold the price by written change order if the scope shifts. The 90-Day Done Right Promise is on every job, and if something isn’t right, you call and we come back.
DIY or Call Us?
A homeowner can safely do the planning leg: measure the Blanco sink and faucet specs, sketch the layout, pull up the Blanco spec sheets for cutout and clearance dimensions, and confirm what your homeowner’s insurance covers for a new addition. That’s real leverage at the estimate stage.
What you shouldn’t do yourself is anything that touches structure, foundation, plumbing rough-in, or electrical in an addition. An addition changes load paths and adds a new plumbing and electrical run to a fixture that needs to be set correctly for the room to work and pass Arlington inspections. Getting a drain stub-out wrong on a slab is expensive to undo. When your Blanco fixture is ready to be built in, call (888) 590-9867 and we’ll sit down with the specs.
FAQs
How long does a Blanco sink or faucet last in a Texas addition? A Blanco stainless or Silgranit sink and a quality Blanco faucet typically last 10 to 20 years indoors; outdoor kitchen use in North Texas sun and occasional freezes shortens that. Heat and UV exposure are the leading causes of premature failure on exterior installs, so fixture selection matters.
Can it be repaired instead of replaced? Sinks rarely need replacing once installed correctly; faucet cartridges, aerators, and sprayers are the common wear parts and are replaceable on most Blanco lines. If the failure is a leaking valve or a scratched basin, repair usually beats replacement, and call us if you’re unsure which you have.
How long does the swap take? A sink or faucet replacement in an existing addition is a few hours on the plumbing side; adding a wet bar or kitchenette into a new addition is a multi-week build. The fixture swap isn’t the timeline driver, the framing, plumbing rough-in, and inspections are.
How do you source the Blanco part? We specify Blanco fixtures as part of the written scope, list the model number and cost at purchase, and you approve it before it’s ordered. No substitution without a written change order. Call (888) 590-9867 for a free estimate.
We build additions and ADUs across Arlington, and we also install KraftMaid, Cambria, and Silestone finishes on the same jobs when the scope calls for it. Every scope, every allowance, and every price change is in writing before we touch the job. Call (888) 590-9867 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.