Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Bathroom Remodeling: The Arlington Owner’s Guide
We remodel and repair Delta-equipped bathrooms across Arlington at a typical installed cost of $9,000 to $28,000 for a full remodel, with targeted fixes like a shower cartridge, trim kit, or valve replacement running far below that. We’re an independent contractor, not affiliated with Delta, and we’ll tell you plainly when a $60 part and a two-hour visit will beat a full bathroom rebuild. Most Arlington owners find out something is wrong the same way: the handle goes soft or spins, a drip starts behind the escutcheon, or a shower that ran hot last winter now needs a full turn toward the red before the water warms up.
Which Delta Models This Applies To
Delta’s bathroom line splits into two families that matter for parts. The single-handle push-pull and lever families (Monitor 13, 14, and 17 series) use a pressure-balance cartridge; the older two-handle widespread faucets and the classic rotary-style tub/shower valves use rubber seats and springs or a ball assembly instead. Get the family wrong and nothing threads in.
Identifying what you have takes about three minutes. Pull the handle (usually a small set screw on the underside or a cap you pry off with a fingernail) and look at the cartridge that comes out. Delta’s RP-number is stamped on the plastic body of most cartridges; that RP number is the part. If there’s no stamp, measure the valve body width and count the splines on the stem. Photograph it before you bag it.
OEM versus aftermarket is the decision most Arlington owners get wrong. For a shower cartridge, the OEM Delta part is worth the extra money: the O-rings and the wear surface are where aftermarket copies cut corners, and a $12 copy that fails in 14 months costs more than the $40 original. For cosmetic parts like handles, escutcheons, and tub spouts, a well-reviewed aftermarket piece is fine. We don’t carry parts or stock them anywhere – we source the exact RP number to your model, which is why we photograph the cartridge first. We also install KraftMaid, Cambria, and Silestone on the remodel side of the bathroom.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Delta Bathroom Remodeling Is Failing
If any of these sound familiar, the valve or cartridge is telling you something:
- Handle spins without resistance or feels spongy. The cartridge’s internal stops have worn flat, so the stem no longer grabs the valve body.
- A drip from the spout when the shower is off. Worn seats and springs (two-handle models) or a scored cartridge face (single-handle) let water pass. Left alone, it stains a tub surround and runs up a water bill.
- Temperature drifts when someone flushes. On a pressure-balance cartridge, the balancing spool is sticking. That’s the part that protects you from a scald.
- Water behind the wall plate. Moisture or a soft, swollen escutcheon means the cartridge body seal has failed. In Arlington’s hard water, mineral scale accelerates that seal failure on a shorter timeline than owners expect.
- Low flow after you’ve cleaned the aerator or showerhead. Debris or scale is lodged in the cartridge inlet screens, restricting flow at the valve, not the fixture.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Honest line-item pricing for the work in Arlington:
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: fixture grade, tile versus acrylic surround, whether plumbing relocates, and whether the valve body behind the wall is sound. The cartridge itself typically runs $15 to $60 in parts; labor is where the cost sits, and we quote it in writing before anyone opens a wall. Every dollar of parts and labor is itemized – no mystery line. Our crew has up to 28 years of experience, and every eligible job gets permits pulled and inspections signed. Every remodel carries our written 90-Day Done Right Promise.
DIY or Call Us?
You can safely shut off the water supply, remove the handle, and photograph the cartridge or ball assembly to identify your RP number. That’s the honest DIY ceiling for most owners.
The line you shouldn’t cross: forcing a corroded cartridge out of a valve body. On older Delta valves, especially in Arlington’s mineral-heavy water, the cartridge seizes and the valve body cracks when someone pulls hard. A cracked valve body means opening the wall – a $60 fix becomes a $900 one. And if you’re on a pressure-balance valve, setting the temperature limit stop wrong is a scald risk, particularly for a household with kids or older adults. We handle the swap with the water off, the part correct, and the anti-scald stop set properly. Call (888) 590-9867 and we’ll talk through which path makes sense.
FAQs
Plan on 8 to 12 years for an OEM cartridge in most Arlington homes, shorter if you’re on a well with high mineral content (often 5 to 7 years). Our hard North Texas water is the main reason a cartridge that should last a decade fails early here. Call (888) 590-9867 if yours is past that window and the tap has started feeling stiff.
Sometimes – a two-handle model’s seats and springs are a $6 repair and worth doing first. A worn single-handle pressure-balance cartridge usually can’t be rebuilt; the wear surface is internal, so replacement is the honest fix. Call (888) 590-9867 and we’ll tell you which you’re facing before you buy anything.
For a single cartridge replacement, expect a two-hour service call including identification, water shutoff, swap, and testing. A remodel is scheduled by scope – usually two to five weeks of working days depending on tile, permits, and fixture delivery. Call (888) 590-9867 for a scheduling window.
We identify your model from the RP number stamped on the cartridge or from the valve body itself, then source the part to that exact spec – it arrives for your install date, not a week later. That’s how we avoid the “wrong part, back to the store” loop that eats a homeowner’s Saturday. Call (888) 590-9867 to get yours matched.
Call (888) 590-9867 to schedule your free estimate. We answer the phone 24 hours a day, a live person every time. Standing offers apply: $40 Off Any Repair Over $200, Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and our permanent 10% Senior & Veteran discount. Every price change comes as a written change order before work moves; every eligible job gets permits and inspections; and every remodel is backed by our 90-Day Done Right Promise – one call brings Tom back. Serving Arlington and the surrounding towns, we’re the name you can look up before you sign.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.