Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Kitchen Remodeling: The Arlington Owner’s Guide
Delta makes faucets, sinks, shower valves and the plumbing trim that goes with them – not full kitchen remodeling. So when you search “Delta kitchen remodeling in Arlington,” what you actually need is one of two things: a Delta faucet or sink installed as part of a kitchen refresh, or a replacement part matched to your existing Delta fixture so the kitchen works again. Our technicians have up to 28 years of experience with both, and a full kitchen remodel in Arlington runs $14,000 – $45,000 while a targeted faucet or part replacement is priced as a small repair. We’re an independent service provider, not affiliated with Delta.
Most owners find us the same way. The pull-down sprayer on a Delta kitchen faucet stops locking back into the head. The handle gets stiff, then drips overnight. Or a Delta under-sink fitting starts weeping onto the cabinet floor and the wood under the sink goes soft before anyone notices. That last one is the expensive version, and it’s why we tell Arlington homeowners to look under the sink with a flashlight twice a year.
Key Takeaways
- Delta is a fixture brand, not a remodeling contractor. We install Delta faucets and sinks and replace Delta parts; we also remodel kitchens around them.
- A full kitchen remodel in Arlington: $14,000 – $45,000. Cabinet installation: $4,000 – $13,000. Countertops: $2,000 – $6,500.
- We don’t carry Delta parts on the truck. We identify your exact model first, then source the correct cartridge or assembly.
- Dripping under a kitchen sink rots cabinet bases fast in North Texas humidity. Water where it shouldn’t be is a call-now situation.
Which Delta Models This Applies To
Delta’s kitchen lineup breaks into a few families, and knowing yours is half the battle. The single-handle pull-down and pull-out faucets (the ones most Arlington kitchens have) use a ceramic cartridge inside the handle body. The two-handle models use compression or ceramic disc stems, one per side. Touch and hands-free models add a solenoid and a battery pack under the sink, and those fail on their own schedule – usually the solenoid, not the faucet body.
Here’s the compatibility gotcha that costs people a second trip: Delta cartridges are not one-size. The RP-number stamped on the cartridge (RP50587, RP73000 and similar) has to match your faucet series exactly, and the same-looking cartridge from a different series won’t seat right. Pull the old cartridge, read the number off the side, and match it. Same rule for sprayer heads – the thread and clip design changed across model years, so a sprayer that looks identical in the package may not lock into your older head assembly.
On OEM versus aftermarket: for a Delta cartridge, we buy OEM or a top-tier aftermarket brand we can stand behind. Off-brand cartridges from the big online marketplaces are where we see repeat failures six months in. If you’re remodeling the whole kitchen, we install Delta fixtures alongside KraftMaid, Cambria and Silestone – brands you can look up – and we spec the faucet to the sink before the countertop gets templated, not after.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Delta Kitchen Remodeling Is Failing
Most Delta kitchen problems announce themselves before they become cabinet damage. These are the five we see most in Arlington homes:
- The faucet drips at the spout when shut off. That’s a worn cartridge or seat, not a loose handle. Tightening the handle won’t fix it and usually makes the cartridge bind.
- The handle is stiff or grinds when you turn it. Mineral buildup inside the cartridge body, common in hard-water areas around Arlington. It progresses to a seized handle if left alone.
- Water pools under the sink after use. Could be the supply connection, the sprayer hose, or a cracked valve body. This one is urgent – wet cabinet board swells and delaminates within days.
- The pull-down sprayer won’t stay docked or dribbles when off. A worn sprayer head or a failed diverter. The diverter is the small piece inside the faucet body that switches flow between spout and sprayer.
- Touch or hands-free models stop responding. Almost always the battery pack or solenoid under the sink, not the faucet. Worth checking batteries before you assume the worst.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full kitchen remodel in Arlington, the range is $14,000 – $45,000, and a small kitchen remodel runs $9,000 – $20,000. Cabinet installation is $4,000 – $13,000, countertop installation $2,000 – $6,500, a backsplash $800 – $2,500, and a kitchen island $3,000 – $10,000. A single Delta faucet or part replacement is priced as a small repair and quoted on its own – we don’t inflate a $200 fix into a remodel.
What drives the remodeling range: cabinet grade and count, countertop material (Cambria quartz sits higher than a laminate), whether the layout moves, and whether electrical or plumbing has to relocate. Every scope, every allowance and every price change arrives as a written change order before the work happens. Every eligible job gets permits pulled and inspections signed. The work is backed by our written 90-Day Done Right Promise – if it’s not right, one call brings us back.
DIY or Call Us?
Some of this you can safely handle. Check the batteries on a touch faucet. Look under the sink with a flashlight and dry up any moisture. Read the RP number off your cartridge and write it down. Confirm your faucet model from the tag under the sink or the escutcheon stamp. That’s all safe and it saves us time.
Where DIY goes wrong: swapping a cartridge on a shut-off valve that’s frozen open, or replacing a supply line without knowing how much the old one is corroded. Turn off the water at the angle stop first, and if the stop won’t close, stop there – that’s a plumber’s call, not a Saturday project. A failed supply line under pressure floods a cabinet in minutes.
If you’re not sure which Delta part you need, call us at (888) 590-9867 and we’ll walk you through identifying it before anyone comes out. Free second opinion on any written estimate, and no trip charge inside the county.
FAQs
Plan on 10 to 15 years for the faucet body, with a cartridge replacement somewhere around year 5 to 8 depending on water hardness. North Texas water carries enough mineral content that cartridges wear faster than they do in softer-water parts of the country. Call (888) 590-9867 for an exact quote – estimates are free.
Usually yes. A dripping or stiff faucet is almost always a cartridge or seat, and that’s a repair, not a replacement. If the body is cracked or the finish is failing at the base, replacement makes more sense. We’ll tell you which honestly.
A cartridge or sprayer swap is typically under an hour. A full faucet replacement runs one to two hours, assuming the shut-off valves work and the countertop cutout fits the new base. If we have to open up a cabinet or address a water-damaged base, it takes longer and we’ll tell you before we start.
We identify your exact Delta model and the RP number from the old part, then source the correct OEM or quality equivalent. We don’t guess and we don’t stock generic parts on a truck hoping one fits. Call (888) 590-9867 with your model number and we’ll confirm what you need before scheduling.
Whether you’re replacing a single Delta cartridge or remodeling the whole kitchen in Arlington, call Barrett & Sons Construction at (888) 590-9867 for a free estimate. We’re owner-operated, every price change comes in writing, and a live person answers the phone 24 hours a day. Ask for the free second opinion on any written estimate, and ask about the permanent 10% senior and veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.