Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Bathroom Remodeling: The Arlington Owner’s Guide
Bathroom remodeling built around American Standard fixtures in Arlington typically runs $9,000 to $28,000 installed, and a small bath runs $5,000 to $12,000. Bathroom projects are planned work, so we schedule them rather than promise same-day arrival; the first step is a free on-site estimate. Most Arlington owners start noticing trouble when a toilet runs for a few seconds on its own, a faucet drips at the spout after shutoff, or the tub drain slows to a crawl no matter what they pour down it. That’s usually the flush valve, the cartridge, or the drain assembly telling you it’s near the end of its life.
We’re Barrett & Sons Construction Arlington. We install American Standard-compatible bathrooms across Arlington, and we’re an independent provider, not affiliated with American Standard.
Which American Standard Models This Applies To
American Standard has been making bathroom fixtures for a long time, and the parts don’t cross over cleanly. A Cadet toilet from the 1990s and a Cadet from 2015 both say “Cadet” on the tank, but the flush valve and fill valve inside them are different builds. The same goes for the Colony line, the Champion, the Vormax, and the older Plebe and Yorkville. Faucet cartridges are the other big one: a Ceramix cartridge and a Colony soft cartridge look similar in a parts photo and won’t interchange.
Here’s the compatibility gotcha that trips people up. On American Standard toilets built before roughly 2005, the tank model number is stamped inside the tank lid or on the back wall of the tank itself, not on the bowl. Owners read the bowl number, order a valve kit, and it doesn’t fit. Pull the lid and read that number before you buy anything.
On the OEM-versus-aftermarket question, it depends on the part. For something critical like a flush valve seal or a faucet cartridge, we lean OEM because the tolerances matter and a cheap knockoff will fail faster. For a basic fill valve or a trip lever, a quality aftermarket part from a known brand is fine and saves money. We tell you which one we’re using and why before anything gets ordered. We don’t stock parts and we don’t carry parts on a truck.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Bathroom Remodeling Is Failing
Here’s what Arlington owners tell us when they call, and what’s usually behind it:
- The toilet runs or refills on its own. A worn flapper or a failing flush valve seal lets water leak past the tank. You hear a short refill cycle at odd hours, and it can add real money to your water bill over a few months.
- The faucet drips at the spout after you turn it off. A tired cartridge or a worn seat lets water past the seal. Keep letting it drip and it etches the finish and strains the supply line.
- The tub drain is slow or backs up. A worn pop-up assembly or a drain body that’s begun to corrode is usually the cause, not hair in the trap.
- The shower won’t hold a steady temperature. A pressure-balance cartridge that’s failing lets hot and cold cross over. This is a safety issue if there are kids or older adults in the house.
- You see mineral crust or rust at the base or shutoff. It’s the North Texas water and the temperature swings that do this, and it usually means a fitting or seal is on its way out.
Replacement Cost & What’s Included
Every price we quote is a range with a written scope, and we don’t move the number without a written change order in your hands first. Here’s what Arlington owners see for American Standard-related bathroom work:
| Job | Installed Range |
|---|---|
| Bathroom remodel (American Standard fixtures) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Vanity installation | $800 – $3,000 |
What moves you up or down the range: fixture grade (American Standard spans a wide spread), tile versus a surround, whether the drain and supply lines have to be moved, and whether permits are needed. What’s included: parts, labor, cleanup, and hauling off the old fixture. The parts-versus-labor split is line-itemed on the quote so you can see what you’re paying for. Every bathroom job we complete is backed by our written 90-Day Done Right Promise, and we pull permits and pass inspections on every eligible job.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check some things yourself. Read the tank model number inside the lid, pull the faucet handle and see whether the cartridge is seized or scored, flush the tub and watch where the water slows, and take photos before you touch anything. That’s the easy, no-risk part, and it actually helps us quote accurately.
Where a lot of homeowners get in trouble: high-tension shower valves with a pressure-balance cartridge, corroded shutoffs that snap when you turn them, and a tub drain that’s rusted into the shoe. If a shutoff is stuck or the valve body is crusted over, stop. A snapped supply line in an upstairs Arlington bathroom can mean thousands in water damage in minutes. That’s the call you make to us. Our crew members have up to 28 years of experience and every one of them is background-checked. Call (888) 590-9867 and we’ll set up a free estimate.
FAQs
A well-maintained American Standard toilet valve or faucet cartridge typically lasts 8 to 15 years here, and the heat and hard water we get in Arlington push more of them toward the shorter end of that. The constant wet-dry cycling on vanity fittings in a Texas summer is a real factor. If yours is past that window, replacing rather than patching is often the smarter money.
Often yes. A flapper, a fill valve, or a single faucet cartridge is a small repair and usually runs well under a full replacement. If the valve body itself is cracked or the cartridge housing is scored, repair stops making sense. Our crew will tell you which one you’re looking at, honestly, and we don’t upsell the bigger job. Call (888) 590-9867 for a free estimate.
A single part like a flush valve or a faucet cartridge is usually a same-visit job. A full fixture replacement like a toilet or vanity runs a few hours. A shower or tub-to-shower conversion is a multiday project and we schedule it as planned work, not an emergency call. We give you the timeline in writing with the quote.
We match your tank or faucet model number to the correct OEM or quality aftermarket part and order it for you, so you’re not guessing at the parts counter. We don’t stock parts, so there’s a short lead time depending on the model. If you can grab that model number before we come out, it saves a day.
Schedule Your Free Estimate in Arlington
If your American Standard bathroom has a part that’s failing or a fixture that’s done its time, call Barrett & Sons Construction Arlington at (888) 590-9867 and we’ll get you a free, written, line-item estimate. We answer the phone with a live person 24 hours a day, every day. Every price change comes as a written change order before work moves, every eligible job gets permits pulled and inspections signed, and every job is backed by our 90-Day Done Right Promise. We also work with KraftMaid, Cambria, and Silestone when your bathroom project touches cabinets or counters, and we offer a free second opinion on any written estimate plus our standing senior and veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.