A Barrett company - serving Arlington, TX

American Standard Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

American Standard Driveway & Pavers: The Arlington Owner’s Guide

We install and service driveway and paver systems for Arlington homeowners, including American Standard-compatible materials for failing drives that were sold as part of an American Standard exterior package. Most paver driveway work in Arlington lands between $7,000 and $18,000 installed; concrete runs $4,500 – $12,000, asphalt $3,500 – $9,000. Barrett & Sons Construction Arlington is an independent contractor and is not affiliated with American Standard.

Call (888) 590-9867

Owners usually don’t wake up looking for “American Standard pavers.” They wake up to a hairline crack that spread across a Texas summer, a paver that rocks when the lawn mower rolls over it, or a low corner of the drive where water stands for two days after every storm. That’s when they dig out the original spec sheet and start matching the system. The good news: this is one of the easier exterior components to diagnose once you know what to look for.

Key Takeaways

  • Paver driveway installation in Arlington: $7,000 – $18,000. Concrete replacement: $4,500 – $12,000. Asphalt: $3,500 – $9,000. Sealing: $250 – $700.
  • Most driveway failures in Arlington trace to base prep and drainage, not the paver or slab itself.
  • We can check what’s under your drive and give you a written recommendation before anything is torn out.
  • Every price change on a Barrett & Sons job arrives as a written change order before work moves.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Which American Standard Models This Applies To

American Standard isn’t a paver manufacturer so much as a name that shows up on builder exterior packages, bundled material specs, and tract spec sheets across North Texas. What that means for you: the part number on your home’s paperwork may not point to a single paver SKU. It often points to a family of materials (a specific paver profile, base depth spec, and drainage detail) that a builder selected in bulk. Look for the original build packet or HOA material schedule first. If you don’t have it, we can take a few measurements on site.

Three things to check before you call anyone:

  • Paver dimensions and corner geometry. Standard American Standard-listed pavers tend toward 4×8-inch and 6×9-inch modular shapes; a mismatched replacement (say a 4×9 or a tumbled 6×6) will never align cleanly with the existing field.
  • Base depth from the grade. North Texas builders ran anywhere from 4 to 8 inches of compacted base depending on the lot and year. That number drives what replacement system will actually hold.
  • Color and finish batch. Most paver manufacturers run color lots per production cycle. If you don’t have the original lot on file, expect a close match rather than a perfect one.

OEM-vs-aftermarket on this component is usually a non-issue. Once you know the dimensions, finish family, and base spec, an equivalent paver from a listed supplier works just as well. That’s where our brand depth helps: we work with Belgard and Techo-Bloc across the hardscape side of every job, so material you can look up is always on the table. We don’t stock parts on a truck and we don’t claim to. We source, verify, and install. If your exterior spec sheet also lists brands for interior work, we handle KraftMaid, Cambria, and Silestone cabinets and counters as well.

Signs Your American Standard Driveway & Pavers Is Failing

Arlington sits on expansive clay soils, and the soil movement here is the single biggest reason driveways fail early. Real symptoms, in order of how often we see them:

  • Hairline cracks that widened over one summer. Clay swells in wet spring then shrinks hard in July, and a slab with thin control joints will split along the joint. Once a crack reaches the edge of a slab, patching will not stop it from spreading.
  • Pavers that rock underfoot. Individual units rock because the sand between them has washed out or the base compacted under them. Usually it’s a drainage failure upstream, not the pavers themselves.
  • A low corner or a pooling puddle after rain. Standing water in the same spot for 24 to 48 hours is a grading problem. Arlington’s clay holds water; a drive that isn’t pitched away from the slab and the lot won’t drain no matter how good the pavers are.
  • Raised, tipped, or popping pavers. Roots from nearby oak or pecan will lift pavers within 5 to 10 years of planting. Culprit roots need to be addressed before re-laying the field.
  • Efflorescence (white haze) that keeps coming back. A one-time haze is normal on new pavers. Recurring haze on a 6-year-old drive points to moisture trapped under the field, which again is a base or drainage issue.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what installed driveway work costs in Arlington, with the part and labor broken out:

Scope Installed Range What’s Included
Paver driveway installation $7,000 – $18,000 Base removal, compacted limestone base, pavers, polymeric sand, edge restraint, drainage tie-in
Driveway replacement (concrete, full) $5,000 – $14,000 Demo, haul-off, base, formed and finished slab, expansion joints
Asphalt paving $3,500 – $9,000 Base prep, hot-mix lift, compaction, edges
Driveway sealing $250 – $700 Clean, prep, single-coat seal

What drives the number up: length and width, how much base has to be torn out, whether the slope has to be re-graded to shed water, and paver selection within Belgard or Techo-Bloc lines. What drives it down: keeping the existing base intact and just re-laying the surface. We put parts and labor on one page, line by line, so you can see what a paver costs versus what the base and labor cost. If we find a surprise mid-job, you get a written change order before any more work moves. Every completed job carries the written 90-Day Done Right Promise.

DIY or Call Us?

There’s a real split here. You can safely check a few things: walk the drive with a hose on, note where water stands and for how long, and lift one paver at the edge to look at what’s under it. What goes wrong with DIY is the part most homeowners can’t see. Re-leveling pavers over a failing base without fixing the base means the same wobble is back by the next wet season. Concrete patches on a clay-soil slab crack again within 6 to 12 months. And re-grading without doing the math on where the water needs to go can push runoff toward the foundation, which turns a driveway problem into a slab problem.

If you want a fast check, call (888) 590-9867 and we’ll walk your drive with you before anything gets torn out. Free estimates, and our crew members are background-checked on every visit.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch